1.5jz navan s14

[allforthebenefit]

Hey guys some of you might know this car. I got it thinking it was a deal and well it wasn't a lot of rust everywhere wasn't taken care of at all. I guess my fault for not really checking it and trusting the old owner, but regardless now it will be bigger better faster stronger haha. I wish I had more engine bay pics of when I took out the sr20 but sadly I don't. The car will be built and tuned in house at Gonzy tuning. A lot of the supra guys might know him and his work.

Parts:
2jz bottom end
1jz head port and polished
Arp head studs
Tt head gasket
Bc springs and retainers
Bc 264 cams
Big daddy performance fuel rail
1000cc precision injectors
Aero motive fuel pressure regulator
I will be going e85 so everything will be e85 ready
Mega squirt ms3
Freed engineering motor mount brackets
Freed engineering driveshaft
Strii fuel, boost and oil pressure gauges
Freed engineering shifter extension
R154 transmission
Act clutch
My cluster will be all led (will post pics)
I will be changing my rack and pinion its f 'Ed up
All the wheel bearings are gone :(
A lot of front suspension will be changed
Innovative 72mm turbo

I will keep you guys updated. I appreciate your time looking if you have any questions feel free to ask.


http://i1234.photobucket.com/albums/ff409/allforthebenefit/null_zps869b38f3.jpg

This is how the car used to look

http://i1234.photobucket.com/albums/ff409/allforthebenefit/null_zps52014552.jpg

This is the sr20 that was in it sadly like I said I didn't really take much images of the engine bay. Let's just say it was horrible.


http://i1234.photobucket.com/albums/ff409/allforthebenefit/null_zpsbed74363.jpg

Taking out the sr20 out with the old. Lol

http://i1234.photobucket.com/albums/ff409/allforthebenefit/null_zpsafb7b599.jpg

Passenger side rust :/

http://i1234.photobucket.com/albums/ff409/allforthebenefit/null_zps4d02c959.jpg

Driver side rust yes I know it's horrible! :(

http://i1234.photobucket.com/albums/ff409/allforthebenefit/null_zps28d4489e.jpg

Sr20 out of the picture :) time to take things apart

http://i1234.photobucket.com/albums/ff409/allforthebenefit/null_zps43b56443.jpg

Found a nice 240 to take the rocker arms out. Hard at work!

http://i1234.photobucket.com/albums/ff409/allforthebenefit/null_zpsba9f856c.jpg

Nice cut. A lot less rust barely any just surface

http://i1234.photobucket.com/albums/ff409/allforthebenefit/null_zps56bbe95a.jpg

I got a lot of pics but I'll just start here a lot of work done a lot of things taken out and a lot of rust fixed! As far as engine bay goes I'll post more later

http://i1234.photobucket.com/albums/ff409/allforthebenefit/null_zps914accd1.jpg

The setup that will be going in the car just gotta change oil pan and do the springs retainers and cams.

[allforthebenefit]

More work getting done

[allforthebenefit]

http://i1234.photobucket.com/albums/ff409/allforthebenefit/null_zpsa9239446.jpg


Some work got done epoxy primer needs wet sanding then another coat of primer. Then paint :)

[BiG MiKE86]

Nice. Subbed..

[stroked_jz]

why megasquirt... that thing is garbage...

[allforthebenefit]

why megasquirt... that thing is garbage...



Everyone has there own opinion. I actually am the tuner so I would love your input as to why you say it's garbage. Many say the same about aem.

[stroked_jz]

Everyone has there own opinion. I actually am the tuner so I would love your input as to why you say it's garbage. Many say the same about aem.

more or less what a few of my friends have said. i only know 1 guy out of the 3 of them who actually got a megasquirt set up working on a jz.

[allforthebenefit]

more or less what a few of my friends have said. i only know 1 guy out of the 3 of them who actually got a megasquirt set up working on a jz.

Its a bit difficult to set up considering you have to wire everything up yourself. And it's different then setting up a aem or any of the newer standalones, but it has great features more then most standalones. The ve tuning makes up for wiring everything up yourself. I'm not saying your wrong everyone has there good and bad reviews but you won't be disappointed with my setup :). Haha

[Frank_Jaeger]

What's the advantage of using the 1JZ head on the 2JZ block? Looks like a promising build! Keep it up!

[Kioes]

Essentially the 1j head flows a bit better, the 2j head for example has a bit more restriction around 5th and 6th cylinder due to casting shapes and the 1j also has slightly bigger exhaust valves (yet 2j's intake valves are slightly bigger) but you also gain slightly higher compression and 500cc more displacement using the 1j head on the 2j block apparently.

That info is bassed on stock heads though, which realistically are still good for large power.

[silviaks2nr]

ge or gte block?

[Kioes]

I'd assume GTE as he said nothing about having to tap the oil return,

[allforthebenefit]

I'd assume GTE as he said nothing about having to tap the oil return,

Sorry guys it's a vvti ge block. Yes I want to
Push the rods to see what they can do. :).

[Kioes]

going for the slightly higher compression?

[allforthebenefit]

going for the slightly higher compression?

Right just slightly higher. See what it can do. :) I have to put pics up of the head being cleaned up port and polished and springs retainers and cams being put in. I also have pics of the oil pan being switched from rear sump to front sump. Bare with me as I have to upload them. Soon enough :).

[Kioes]

Right just slightly higher. See what it can do. :) I have to put pics up of the head being cleaned up port and polished and springs retainers and cams being put in. I also have pics of the oil pan being switched from rear sump to front sump. Bare with me as I have to upload them. Soon enough :).

Did you go bigger intake valves to get the best of both worlds? (Example, 1j head already having bigger exhaust valves then 2J)

[juvi22003]

Coming along nicely love what you did with the engine bay....

[allforthebenefit]

Did you go bigger intake valves to get the best of both worlds? (Example, 1j head already having bigger exhaust valves then 2J)

No Im still going to used stock valves but that I'd a really good idea!

[allforthebenefit]

Coming along nicely love what you did with the engine bay....

Thank you I appreciate the compliment!

[redhatchy92]

Too bad this car wasnt what we expected it to be when we bought it. it looked so nice from pics but when we started to take it apart it was obvious that it needed much work. its gonna be a beast when its done regardless and you know its gonna be built right and Gonzy's.

[allforthebenefit]

Hey guys so since we can't paint because it's too cold I decided to get some work done on the motor......

http://i1234.photobucket.com/albums/ff409/allforthebenefit/6C5BAF36-843D-4664-8B16-165690CA35A5_zpsurhgnxrk.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/6C5BAF36-843D-4664-8B16-165690CA35A5_zpsurhgnxrk.jpg.html)

This is the rear sump oil pan that was on

http://i1234.photobucket.com/albums/ff409/allforthebenefit/1FA5E1FA-A20A-4C75-A420-DDAF8FD253A3_zpsvbnas5xe.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/1FA5E1FA-A20A-4C75-A420-DDAF8FD253A3_zpsvbnas5xe.jpg.html)

Spent hours cleaning the front sump. Now minty! Lol

http://i1234.photobucket.com/albums/ff409/allforthebenefit/FD64DC41-A4A6-4CB6-8256-5DF902B2A491_zpswrgbskh0.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/FD64DC41-A4A6-4CB6-8256-5DF902B2A491_zpswrgbskh0.jpg.html)

Other side of front sump

http://i1234.photobucket.com/albums/ff409/allforthebenefit/C0E30095-37D0-4FCB-A45A-CF9A00BEA5E5_zps3q53nh0t.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/C0E30095-37D0-4FCB-A45A-CF9A00BEA5E5_zps3q53nh0t.jpg.html)

Putting the sealant on!

http://i1234.photobucket.com/albums/ff409/allforthebenefit/F90E2E69-DE04-44CA-B272-0EF5C437EB8C_zpszo255ao0.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/F90E2E69-DE04-44CA-B272-0EF5C437EB8C_zpszo255ao0.jpg.html)

Tourqeing things down!

[allforthebenefit]

http://i1234.photobucket.com/albums/ff409/allforthebenefit/ACB85982-63EC-41FF-ABB5-E98919A59DB0_zpsmvttuthd.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/ACB85982-63EC-41FF-ABB5-E98919A59DB0_zpsmvttuthd.jpg.html)

How the motor looks! Not bad!

http://i1234.photobucket.com/albums/ff409/allforthebenefit/CF74F5D7-1B9C-4C61-A19C-D8C9862F2223_zpsl5ysbpa9.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/CF74F5D7-1B9C-4C61-A19C-D8C9862F2223_zpsl5ysbpa9.jpg.html)

The front sump baffle plate almost done!

http://i1234.photobucket.com/albums/ff409/allforthebenefit/782D003C-BA5B-4423-A87D-37759BBD5EFC_zpskfmc0fbs.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/782D003C-BA5B-4423-A87D-37759BBD5EFC_zpskfmc0fbs.jpg.html)

Finished all clean!

http://i1234.photobucket.com/albums/ff409/allforthebenefit/DB0DCDBE-B208-4A82-948F-10318274FC1B_zpshfmstvzf.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/DB0DCDBE-B208-4A82-948F-10318274FC1B_zpshfmstvzf.jpg.html)

All done till next time lol

[allforthebenefit]

Hey guys more of an update we got to do more work in the garage!

http://i1234.photobucket.com/albums/ff409/allforthebenefit/347AB6D9-AC43-4BCE-9624-19DBB12A5302_zpsuzgg71jb.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/347AB6D9-AC43-4BCE-9624-19DBB12A5302_zpsuzgg71jb.jpg.html)

Engine bay came out really awesome just how I wanted it!!

http://i1234.photobucket.com/albums/ff409/allforthebenefit/A509753B-5015-46C0-9639-EAEC1270B5E2_zpsbtdvqkpq.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/A509753B-5015-46C0-9639-EAEC1270B5E2_zpsbtdvqkpq.jpg.html)

It changes color from green to light blue like a teal it's crazy really beautiful color!

[Kioes]

Coming along nicely mate!

[allforthebenefit]

Hey guys so I been a little busy lately haven't been able to work on car, finally made some time so time for work here are some updated!!!!

So I ordered wheels :)
http://i1234.photobucket.com/albums/ff409/allforthebenefit/9B97C02C-3A11-4731-B0B3-220DC970DFF6_zpst48q45oa.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/9B97C02C-3A11-4731-B0B3-220DC970DFF6_zpst48q45oa.jpg.html)

Left are rears right are fronts I like them a lot!!!

http://i1234.photobucket.com/albums/ff409/allforthebenefit/53075764-D23D-45AE-9D24-9128FC2C29C2_zpsly24c51t.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/53075764-D23D-45AE-9D24-9128FC2C29C2_zpsly24c51t.jpg.html)

Started taking out the cams!!
http://i1234.photobucket.com/albums/ff409/allforthebenefit/730F7D17-8701-4F4B-8E4F-C89ADF5138AC_zpstqhbrpyi.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/730F7D17-8701-4F4B-8E4F-C89ADF5138AC_zpstqhbrpyi.jpg.html)

Installing bc springs and retainers and 264 cams

http://i1234.photobucket.com/albums/ff409/allforthebenefit/8750ABF7-5C30-44CE-853D-68AD794E2415_zpsokfb5lnj.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/8750ABF7-5C30-44CE-853D-68AD794E2415_zpsokfb5lnj.jpg.html)

We did the freed engineering extension for the shifter came out great!

http://i1234.photobucket.com/albums/ff409/allforthebenefit/FEED2665-5209-48CF-8AD4-108177EF5355_zpsywl9lixq.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/FEED2665-5209-48CF-8AD4-108177EF5355_zpsywl9lixq.jpg.html)

Took at the rack horrible condition sending it to get rebuilt!
http://i1234.photobucket.com/albums/ff409/allforthebenefit/96BAD140-58E2-4850-B12B-F551530E0EB2_zpsorsjkd3c.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/96BAD140-58E2-4850-B12B-F551530E0EB2_zpsorsjkd3c.jpg.html)

Oh look it's bent lol

http://i1234.photobucket.com/albums/ff409/allforthebenefit/EA0EB561-FC0C-4BF6-954A-8357F7D28430_zpskebshngm.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/EA0EB561-FC0C-4BF6-954A-8357F7D28430_zpskebshngm.jpg.html)

Took out wheel bearing because they are shot

http://i1234.photobucket.com/albums/ff409/allforthebenefit/1F9A68C4-40EA-44EE-8BC4-01D93B0D461F_zpsbrrx7gbr.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/1F9A68C4-40EA-44EE-8BC4-01D93B0D461F_zpsbrrx7gbr.jpg.html)

http://i1234.photobucket.com/albums/ff409/allforthebenefit/C43CD2C7-BFE1-4FFD-A116-F62E0A81DCE2_zpsyhxqzcek.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/C43CD2C7-BFE1-4FFD-A116-F62E0A81DCE2_zpsyhxqzcek.jpg.html)

http://i1234.photobucket.com/albums/ff409/allforthebenefit/731F7AB1-567C-4553-8074-0FC11F0BE8DD_zps0f4zpbel.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/731F7AB1-567C-4553-8074-0FC11F0BE8DD_zps0f4zpbel.jpg.html)

http://i1234.photobucket.com/albums/ff409/allforthebenefit/0E884C34-B7DC-4C19-A7CD-CC58E4A2C73F_zpsvpdsnmik.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/0E884C34-B7DC-4C19-A7CD-CC58E4A2C73F_zpsvpdsnmik.jpg.html)

Decided to go q45 calibers with brand new rotors and pads
http://i1234.photobucket.com/albums/ff409/allforthebenefit/625AE4FC-C2E8-4B7E-8840-05F8229DC877_zpsmqjzif5p.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/625AE4FC-C2E8-4B7E-8840-05F8229DC877_zpsmqjzif5p.jpg.html)

New hubs
http://i1234.photobucket.com/albums/ff409/allforthebenefit/B64D4B1D-03D2-4262-82AE-3CF4EE09262C_zpsc1odmo6x.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/B64D4B1D-03D2-4262-82AE-3CF4EE09262C_zpsc1odmo6x.jpg.html)

Rebuilt rack with circuit sport inner and outter tie rods

http://i1234.photobucket.com/albums/ff409/allforthebenefit/8CCD12D2-9335-411B-818E-65618D2D2F79_zpsqnds5tzo.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/8CCD12D2-9335-411B-818E-65618D2D2F79_zpsqnds5tzo.jpg.html)

That's all for now will keep you updated very soon trying to get the ball rolling :)

[mxkilla450]

what wheels are those?

[allforthebenefit]

They are yoshiharas

Here's an update.... Just got the silly sway bar removed the stock one thank god lol

http://i1234.photobucket.com/albums/ff409/allforthebenefit/1D1C4B6F-F904-4A7F-B099-071CE4AFAE54_zpsjpcn1cia.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/1D1C4B6F-F904-4A7F-B099-071CE4AFAE54_zpsjpcn1cia.jpg.html)

Brakes are all done!! Just have to order braided lines.

http://i1234.photobucket.com/albums/ff409/allforthebenefit/16ADDDED-6657-41C3-B5F8-679EFBB8F797_zpscweckxmd.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/16ADDDED-6657-41C3-B5F8-679EFBB8F797_zpscweckxmd.jpg.html)

http://i1234.photobucket.com/albums/ff409/allforthebenefit/A9B0E65D-7C25-473A-A822-B44ED65DA1FA_zpsxklzxrui.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/A9B0E65D-7C25-473A-A822-B44ED65DA1FA_zpsxklzxrui.jpg.html)

Custom brake lines being test fitted for the brake master cylinder!

http://i1234.photobucket.com/albums/ff409/allforthebenefit/6892B6DE-72A6-442C-AD74-62156D262020_zpsbztz0h7k.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/6892B6DE-72A6-442C-AD74-62156D262020_zpsbztz0h7k.jpg.html)

Hopefully next step is dropping in the motor.

[allforthebenefit]

Motor before being dropped in I also decided to take off exhaust mani and intake mani so nothing gets scratched and we can see where mounts go

http://i1234.photobucket.com/albums/ff409/allforthebenefit/2F97943D-9135-4C38-97FD-E56111D9C8B1_zpsqk6okuhz.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/2F97943D-9135-4C38-97FD-E56111D9C8B1_zpsqk6okuhz.jpg.html)

It's night time but motor is in! Now to get valve covers turbo inlet powder coated hmmm what color.still a lot of work left but a good sign of what's to come. :)

http://i1234.photobucket.com/albums/ff409/allforthebenefit/E0F64636-1A9D-4063-BB1B-1B05D3B4C375_zps8fm3nffc.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/E0F64636-1A9D-4063-BB1B-1B05D3B4C375_zps8fm3nffc.jpg.html)

[allforthebenefit]

Hey guys a little bit of an update. Might have to relocate the fuse box

http://i1234.photobucket.com/albums/ff409/allforthebenefit/E564DFFC-82B2-4576-874B-779422CCC62A_zps8pwamqow.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/E564DFFC-82B2-4576-874B-779422CCC62A_zps8pwamqow.jpg.html)

http://i1234.photobucket.com/albums/ff409/allforthebenefit/2A4AE1EC-CB8B-479D-A96A-A99204F0ACAD_zpsiif5cbr6.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/2A4AE1EC-CB8B-479D-A96A-A99204F0ACAD_zpsiif5cbr6.jpg.html)

Put in the sway bar! Now just waiting on some fuel and some powder coating! Still don't know what colors I'm going with! Lol

http://i1234.photobucket.com/albums/ff409/allforthebenefit/24312117-77C5-4930-AC5E-CA3F6DB8C4DF_zpseafzcgr6.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/24312117-77C5-4930-AC5E-CA3F6DB8C4DF_zpseafzcgr6.jpg.html)

[FourtyKid]

Nice build but beware I've heard nothing but bad things about Circuit Sports tie rods.

[smokescreen240]

this is gonna be sweet! that sway bar looks so beefy.

^^i second that comment about those tie rods

[allforthebenefit]

Nice build but beware I've heard nothing but bad things about Circuit Sports tie rods.

I can see why they look worst then stock thanks for the heads up I'll prob end up changing them

[allforthebenefit]

http://i1234.photobucket.com/albums/ff409/allforthebenefit/C75DB30A-098C-4618-B674-BC21CB84D94E_zpsjf603ju5.jpg (http://s1234.photobucket.com/user/allforthebenefit/media/C75DB30A-098C-4618-B674-BC21CB84D94E_zpsjf603ju5.jpg.html)

New update just been a little busy. Front mount in place and now I found out I need a new radiator yay!

[Silviacraze05jr]

Looks good man

[Toomuchboost12]

wow havei been sleeping on your build lol . Sweet build love how you sticked with the navan zenki aero .