ISIS 3871 Turbo

[unreal-]

See 2nd post for pictures

Used for about 2000 miles. No shaft play/smoking or any funny business. Will come with the WG actuator. You can use it on any T25/T28 Flanged setup. Went with a smaller turbo. Just pulled it off my running KA-T setup about a week ago.

Any questions or additional pictures, PM me.


SOLD SOLD SOLD

[unreal-]

bump!

updated: took some better picture of the front of the turbo and fixed the flash issue i was having before.

http://farm3.staticflickr.com/2839/11285994855_6824321899_b.jpg

http://farm8.staticflickr.com/7444/10954816423_2bf2d1ddf1_b.jpg

http://farm3.staticflickr.com/2828/10954666936_2008715be1_b.jpg

http://farm8.staticflickr.com/7327/10954816143_53ca00c8d7_b.jpg

[unreal-]

omgggggggggg bump!!!

[assad112000]

does this come with the oil feed fitting shown in the pics? Im super interested in this

[xaaronx]

The first picture of the hot side shows the wastegate flap white with super clean blades and 4 studs, second pic of the hot side shows the wastegate charred with black blades and there are only 2 studs LOL. Stealing pics much? Or is the first photo not recent?

[unreal-]

does this come with the oil feed fitting shown in the pics? Im super interested in this

Yes it comes with the feed fitting from the pictures.

The first picture of the hot side shows the wastegate flap white with super clean blades and 4 studs, second pic of the hot side shows the wastegate charred with black blades and there are only 2 studs LOL. Stealing pics much? Or is the first photo not recent?

First set of pics was from a similar ISIS turbo that i had for sale a few weeks before. I can take another set of pictures and remove the first set if that would be better. The whiteness that you see on the WG flapper was likely from my motor running leaner than normal for a few weeks while i was troubleshooting some issues with my ECU. That tends to create a white coating on some exhaust parts. 2nd set of pics was from my current setup with a much better running motor, hence the darker soot.



PRICE DROP!!!! turbo is now 300 shipped!

[unreal-]

bumppp

removed the incorrect pictures from first post, and updated pricing!

Buy this now for an early XMAS gift! :D HO HO HO!

[jarred3636]

What was your thought on this turbo? I'm a little interested, I would just want your honest opinion on the turbo.

[RedS-14]

If i had the cash id buy this ugh.i made 320whp on my s13sr on 15psi and have had the turbo for a year if that helps any.

[unreal-]

What was your thought on this turbo? I'm a little interested, I would just want your honest opinion on the turbo.


The turbo is pretty good. At the low boost levels that i was running it tended to creep, but if you run more than 12psi or so i do not think it would be a problem. I guess my setup flows more than others lol. Its a high flowing turbo and if you run lower boost levels you might need to port the wastegate hole or convert to external.

It hits really hard once 4,000 comes along (on my KA) and is surprisingly easy to drive without getting into boost. Besides that it spools pretty quick for a journal bearing and pulls to redline like a mofo! :naughtyd:

If i had the cash id buy this ugh.i made 320whp on my s13sr on 15psi and have had the turbo for a year if that helps any.

Buy it anyways! Bill Me Later is your friend! :s101:

[Rob_A]

Interested, please pm me

[unreal-]

Interested, please pm me

PM sent.


msglength

[unreal-]

bump! Buy it now!

:)

[unreal-]

ohhhhhhhhhhhh YEAAAAAAAAA!!!

its bump time!

[unreal-]

pricing updated. XMAS SALE!!!!

[unreal-]

Bump bump bump

[unreal-]

sold!sold!sold!sold!