Thomas0zero
08-05-2013, 10:47 PM
Little question here. Just swapped a Blacktop (without VCT) sr20det in my friends S13. I soldered all the wires myself and followed this guide, HERE (http://www.frsport.com/SR20DET-Swap-Engine-Harness-Wiring-Diagram-Guide-SR-SR20_t_26.html).
Im getting fuel and the spark signal, but no spark. The coil pack uses a three pin harness. Im getting +12v key on, +12v signal, and nothing on the third wire. The wire color is black on coil one, and red for coil two through four. I believe its a grounding issue and I have checked all my grounding straps, and everything looks good. I could be wrong about that wire being ground, but thats why im asking.
Any help would be great, thanks.
Im getting fuel and the spark signal, but no spark. The coil pack uses a three pin harness. Im getting +12v key on, +12v signal, and nothing on the third wire. The wire color is black on coil one, and red for coil two through four. I believe its a grounding issue and I have checked all my grounding straps, and everything looks good. I could be wrong about that wire being ground, but thats why im asking.
Any help would be great, thanks.