Bee R Install on a 240SX S14 OBD1

[xzero101]

Ok so I searched everywhere and there is no correct guide to install a Bee R Rev limiter on a OBD1 S14.

Does anyone here knows how to wire this? I just need the ECU pin#s

Thanks

[sr20det-s14]

look it up in the fsm if your just needing a pin out of the ecu

[xzero101]

look it up in the fsm if your just needing a pin out of the ecu

Thanks but I need someone to give me the correct 4 pin#s where I need to hook up the wires.

Because on some threads they hooked up the ignition wire to the cas and some to the ignition switch. I just wanna make sure whats the right one

[DennisC]

I have never tested this.
http://i159.photobucket.com/albums/t150/psp339/95KA24DEBEERWiring.png

[xzero101]

I have never tested this.
http://i159.photobucket.com/albums/t150/psp339/95KA24DEBEERWiring.png

That's obd2 :S

[DennisC]

I thought all S14 had the same ecu pinout.

[Paint209]

I never seen that pinout before. ill give it a try tomorrow on my s14 obd2.

[Paint209]

does not work.:doh:

[xzero101]

The same unit still works in a sr setup

[Edwin562]

didnt obd1 converted to obd2 in 94?

[sr20det-s14]

most cars it was standard in 96 on up to have obd2