Drift Freaq Polyurethane Engine & Trans Mounts! FINAL CLEARANCE SALE!

[drift freaq]

These are 80 durometer track tested high quality polyurethane engine and trans mounts. There is a link in my sig that will take you to a multi page review. Lots of people here are using my mounts.



The studs do not run straight through the center of these mounts unlike other brands.
You will not get any excessive vibrations from these because of this.
You will get mounts that are better than Nismo and do not rattle your teeth.

A trans mount replacement is recommended as most 240sx stock trans mounts are worn by now. Unless it's been replaced previously. If your shifter moves around a lot your trans mount is probably worn out.
See below for the solution.

Drift Freaq Trans Mounts
The trans mount has exhaust hanger studs!! It also improves your shifting because your transmission no longer moves around under your shift lever like stock. Because of this you get a the effect of having a short shifter without really having one. The shift lever goes straight into its gates quickly and with less effort.

[B]You may experience minor vibrations from the trans mount compared to the feel of a stock trans mount. The trans is responsible for a lot of NVH in our cars hence why Nissan put in the wimpy stock trans mount that let's you shifter wiggle all over. This vibration will diminish as the mounts set in.


I also should point out that the nuts that are provided are Nyloc which means you do not need to torque them down hard. A hand wrench is fine for tightening them. Do not use an air ratchet or impact gun.

This is the latest design with centered studs (that are not connected) in British Racing Green.


Ok Guys this is it we are entering Final days. I am leaving the business. I will be having an End of Business sale with fairly decent discounts.

Which you see below this will be a sale til end of stock.

There will also be no heat shields sold as they are going out of production

$136 shipped for trans mount.

$136 shipped for a set of mounts

$255 shipped for a set of mounts with trans




All sales are final i.e. No returns because you decide you don't want or need them. So please make sure you want/need the item before making your purchase.





my paypal is [email protected]



http://i705.photobucket.com/albums/ww52/driftfreaq/IMG_0364_zps1923722b.jpg

[DJ-of-E]

So you finally have a sticky thread. =P

I can attest that these mounts can handle pretty damn over 1000lbs worth of abuse. I know, I did some stupid shit with the engine hoist and forgot to "unbolt" the bottom of the engine mount.

[denian_cellphone]

best mounts on the market!

[lalo167]

Just started my car up for the first time with these on and my motor did not shake one bit during idle!! Put a penny on the valve cover and it was super still. Great mounts!

[[email protected]]

Can locals pick up after the 10th?

[drift freaq]

Can locals pick up after the 10th?


yes local pickup will be available after the 10th.

[AsleepAltima]

i might have to get me the trans mount. tired of feeling my shifter move.

[zerodameaon]

Have been telling myself I need to buy a set of these for a very long time. Finally did and my teeth are going to be very happy to see those other mounts I have go away.

[AJZax]

These are on my pro-am car. Actually fairly comfortable :) Even when paired with xcessive solid trans mount (Z32 conversion). I'm VERY happy and I'll be recommending them to everyone in NW region who's looking for mounts :)

Motor stays very planted, but car doesn't loosen bolts ^_^. It's comfortable. I'm most likely going to buy these for my street/daily s14 car I'll be "building". I'm sure it'd be even smoother with drift freaq trans mount instead of the metal to metal trans mount from xcessive, lol.

I recommend these!

[Rich260z]

Seriosuly these rock, was using the mounts just on the motor and when started getting parts for a 5 spd swap I knew what tranny mount to get.

[zerodameaon]

They ship today :) Can't wait.

[ATLspeed]

whats the height of these compared to stock or nismo motor mounts. I have a 2jz in mine s13 and my window weld filled mounts have my oil pan sitting level with my subframe.

Car is slammed and oil pan would like some more safety besides my skid plate.

I'm between your mounts and Xcessive mounts.

Thanks

[drift freaq]

whats the height of these compared to stock or nismo motor mounts. I have a 2jz in mine s13 and my window weld filled mounts have my oil pan sitting level with my subframe.

Car is slammed and oil pan would like some more safety besides my skid plate.

I'm between your mounts and Xcessive mounts.

Thanks
The height of the mount or how high it makes your engine sit? Nismo mounts raise your engine up about an inch my mounts will drop your engine down about 1/2 inch to 3/4 of inch though the oil pan will not sit below the crossmember. I am not sure how deep the 2j pan runs in comparison to KA or SR pans. If you want a set of mounts that are not going to rattle your teeth then you will want my mounts.
My mounts are right around 2 and 3/4 inches tall.

[zerodameaon]

Coming from the temporary(that was not so temporary) fix of Circuit Sports mounts after my stock ones broke, these things are amazing. These feel very nice, very little vibration and they honestly feel way more responsive than the CS mounts. Its also very nice to not have to guess where the transmission is going to be under your car as its bouncing around.

These are great thanks!

[ICOMPLAINALOT]

When will these ship out if I order?


Posted from Zilvia.net App for Android

[ICOMPLAINALOT]

And will they work with my zerolift 1jz s14 swap mounts? The mounts work with the stock engine and Trans mount so I assume it will


Posted from Zilvia.net App for Android

[Dirtcanhurt089]

You have my attention lol ill be ordering a set in the next 2 weeks I need mounts baddd

Sent from my HTC VLE_U using Tapatalk 2

[drift freaq]

And will they work with my zerolift 1jz s14 swap mounts? The mounts work with the stock engine and Trans mount so I assume it will


Posted from Zilvia.net App for Android

They should work fine. As far as shipping goes it is usually pretty fast but i do say allow up to weeks time from ordering for shipping. As far as shipping time itself goes I ship priority mail so you usually see the product in 2-3 days from actual shipment date.

[801nismo104]

you should have a memorial day sale discount :) i bet you will sell alot of sets.

[drift freaq]

you should have a memorial day sale discount :) i bet you will sell alot of sets.

Ya you would like that. Don't expect it to happen now though. You suggested it. LOL

[TwelveAM]

I'll be picking up a tranny mount soon. My car hops all over the place. :(

Been reading nothing but good reviews on your mounts.

[trainwreck 14]

Why is shipping so expensive on these? I would consider buying if the cost wasn't so disproportional.

[drift freaq]

Why is shipping so expensive on these? I would consider buying if the cost wasn't so disproportional.

Perhaps you do not understand the breakdown . Shipping for a set of engine mounts is a flat $16 and for engine and trans is $19 due to the extra weight. The price of the engine mounts is $120 the price of the trans mount is $120 when you buy them together you actually get a $10 discount.

[ICOMPLAINALOT]

From the reviews I've been reading the 19 bucks is probably totally worth it


Posted from Zilvia.net App for Android

[zerodameaon]

Why is shipping so expensive on these? I would consider buying if the cost wasn't so disproportional.

If this is stopping you, you are really missing out. These are still a deal for the quality you are getting, think of it this way, they cost 249 bucks and you get free shipping.

[drift freaq]

If this is stopping you, you are really missing out. These are still a deal for the quality you are getting, think of it this way, they cost 249 bucks and you get free shipping.

I might use this in marketing $249 Free shipping! LOL Seriously the shipping cost is less than 10% of the actual purchase price which is no way disproportional.

[Driftwurks]

Awesome mounts! Ran them on my S13 and they felt great. Combined with Amsoil transmission fluid, my shifts felt very crisp and fell right into place (none of that wiggling bull on the freeway that you get with stock, worn out mounts).

[racepar1]

Why is shipping so expensive on these? I would consider buying if the cost wasn't so disproportional.

Really... just... REALLY?!?!

So you're saying you would buy them if shipping was $5 cheaper? That doesn't even make sense, talk about a CHEAP ASS...

I guess people's time isn't worth anything to you.

[ICOMPLAINALOT]

Do I just send you the money and leave my address in the notes then you'll ship out?


Posted from Zilvia.net App for Android

[drift freaq]

Do I just send you the money and leave my address in the notes then you'll ship out?


Posted from Zilvia.net App for Android
That is correct. You paypal me and if your address is not in your paypal leave it in a note and I ship them.

paypal is [email protected]

[SoCalDrifter]

anyone use these on the track?

[zerodameaon]

Check his review thread, there are a number of people who have.

[Ham8urger]

im doing a ka swap into a datsun 510. any idea if ill run into any problems using ka mounts on my modded xmember?

[Rich260z]

If stock Ka mounts will line up, then these will work. So it depends on how you modded your xmember

[limited240]

were can we pick up?

[drift freaq]

were can we pick up?
you can paypal me at [email protected] and I can ship them or you can p.m. and make arrangements to meet locally.

[TwelveAM]

I would like to say that I'm impressed with the drastic change my car had with the tranny mount.

I will definitely be picking up the motor mounts soon. Thanks again!! Definitely worth every penny.

[mnight]

I've been searching for mounts for my rebuild and haven't found such overwhelming positive reviews until now. Definitely ordering a set when I have the money.

[drift freaq]

good to hear that.

[yayforbrandon]

do you still have then will pick up to day call or text me at 949-680-9802 thanks

[Bambi]

broooooooo we wants da engine mounts

[zerodameaon]

I have found some pictures of a install with these and Zerolift RB25 mount kit. Looks like these will be going into that swap as well.

[drift freaq]

People please p.m. me I get busy and don't always see posts the day they are posted.

[yetijeff]

How much for engine and Trans shipped to 92505

[assad112000]

ordered my trans mount 2 days ago and its already here! awesome quality and shipping time was the fastest ive ever encountered. Great product! Ill be ordering engin mounts in the future!

[drift freaq]

This sale is only going on for a few more days folks.

[Diesel240]

You have a pm and cash moneys in your Paypal!

[drift freaq]

You have a pm and cash moneys in your Paypal!


Thank you product has been shipped.

[chriskilla2]

Payment sent!. Please dont ship to paypal address, correct address is in the message. Thanks

[drift freaq]

Payment sent!. Please dont ship to paypal address, correct address is in the message. Thanks
you did not put your name or your zip code in the message. Just your street address and city.

[drift freaq]

When will these ship out if I order?http://erjie.smokemaps.com/16.jpg


Well that all depends. Basically after tomorrow morning everything will ship out on oct 3 or 4th.
I will be out of town till then but I will fill and ship the order when I get back.

Usually my shipping is quite fast though. I use priority mail as well so it does not take longer than 2-3 days from when I ship.

Oh and there really is no reason to use the rant emoticon. I am known for quick shipping and keeping my customers informed.

[drift freaq]

All currently ordered items will start shipping a week from tomorrow i.e. wed OCT 2.

[carcrazee]

wat heat wrap do u recommend? the actual wrap or is the heat tape stuff good enough?

[drift freaq]

wat heat wrap do u recommend? the actual wrap or is the heat tape stuff good enough?

A shield on top would be good. Do you still have your factory stock shield it can be reused if you just do a little bending to it. As far as the heat wrap goes there are several suggestions and examples in the review thread in the tech section.

You definitely want to put it on top though, if you are not using a shield.
As it is directly underneath the turbo if you are running a turbo and the exhaust as well.

[kumokun]

not trying to bash these mounts, i have had these mounts and they are awesome but just wanna warn everyone. i just did a 1jz vvti swap and the passenger mount is melting. i have heat shields but these mounts can't handle to much heat. great mounts just letting everyone know. like i said not trying to bash these mounts.

[drift freaq]

not trying to bash these mounts, i have had these mounts and they are awesome but just wanna warn everyone. i just did a 1jz vvti swap and the passenger mount is melting. i have heat shields but these mounts can't handle to much heat. great mounts just letting everyone know. like i said not trying to bash these mounts.


Ok you are using the mounts in a situation that does not normally allow enough room in the engine bay for heat to escape i.e. engine is larger than what the engine bay was designed for. Second your engine creates way more heat than a KA/SR/CA.
So in this situation excessive heat is an issue.

This is not a normal situation nor is it a recommended situation. Under normal conditions with heat shields they work fine.

Though this swap has been done by others with my mounts, it is not an application I would warranty. Due to the excessive heat issues that come with this kind of swap.

I suggest to all.. Yes you do need a heat shield. Though heat wrap can work is not the most ideal. It actually can trap heat.

You would be better off taking a soup can drilling a hole in the end for the stud and dropping it down over the mount. You would probably want cut the can in half or 3/4 thereby creating an umbrella effect to dissipate the heat and allowing a cooling area between the mount and the heat shield.

[ng26]

I think you should design an actual heat shield for these and sell them or include them in the price. I plan on buying a set and trans mount soon but am trying to figure out a heat shield since I don't have my stock one and I really don't want to use a soup can to protect such a good product. Any other ideas you may have?

[drift freaq]

I think you should design an actual heat shield for these and sell them or include them in the price. I plan on buying a set and trans mount soon but am trying to figure out a heat shield since I don't have my stock one and I really don't want to use a soup can to protect such a good product. Any other ideas you may have?

I was going to say use your factory heat shield. LOL

I suggested the soup can as a quick easy way to do a thorough job in fact it would be very effective.
If I start making heat shields for the mounts the price will raise by around $10 per set. If made one like the soup can idea it would cost even more to manufacture.

Most people in these economic times are not that willing to pay $10 more per set.

If you are wiling to pay $10 more for you set? I can see about making a heat shield for you.

Though I am not sure the average consumer is willing to pay the extra on a regular basis. Hence why I have not sold heat shields in years.

[ng26]

I was going to say use your factory heat shield. LOL

I suggested the soup can as a quick easy way to do a thorough job in fact it would be very effective.
If I start making heat shields for the mounts the price will raise by around $10 per set. If made one like the soup can idea it would cost even more to manufacture.

Most people in these economic times are not that willing to pay $10 more per set.

If you are wiling to pay $10 more for you set? I can see about making a heat shield for you.

Though I am not sure the average consumer is willing to pay the extra on a regular basis. Hence why I have not sold heat shields in years.

Ok i would be willing to pay the extra 10 bucks for a heat shield when I order mine soon. I will remind you when the time comes!

[Kamiyo]

I would feel comfortable about paying extra for a heat shield as well. I plan on picking up both mounts at the beginning of November (I'm in desperate need of new mounts, but I can't afford them until then), and I would love if you could include an option of heat shields at a higher cost.

[drift freaq]

If I get at least 10 people interested in going for heat shields I might consider a regular production run.

[Riedell]

Wow, looks like these mounts have advanced very well. Im still using the original yellow ones, but atm currently rebuilding the motor! These mounts I recommend to anyone who wants little to NO vibrations, but close to full power to the wheels and little to no engine movement.

Still going strong, but are showing signs of weakness a little with the originals, but man these mounts BLOW AWAY any other mounts on the market. Thanks again drift freaq!

[zerodameaon]

I am down for a heat shield if it will work for a RB25.

[drift freaq]

I am down for a heat shield if it will work for a RB25.

I don't see why it would not.

[tacotacotaco]

I would order again if a heat shield is available with it.

[redline240sx]

Interested In a set for the KADE motor, with heat shield. Pm sent

[mr.nismo.]

Just wanted to throw out I've been beating on these mounts for a year and a half and they still are great!

[drift freaq]

Ok guys you asked for them and they are here the first run of Heat shields. It took time and effort to make them. So the cost of the mounts with heat shields is $135 shipped will be $151. If you buy them with the trans mount I will knock off $5
so the engine mount with heat shield and trans mount will be $259 shipped that is $130 for engine with mount with heat shield and $110 for the trans mount plus $19 for shipping and handling. On to the pics

http://i705.photobucket.com/albums/ww52/driftfreaq/IMG_0736_zps8ac4b791.jpg (http://s705.photobucket.com/user/driftfreaq/media/IMG_0736_zps8ac4b791.jpg.html)
http://i705.photobucket.com/albums/ww52/driftfreaq/IMG_0737_zps07b9912f.jpg (http://s705.photobucket.com/user/driftfreaq/media/IMG_0737_zps07b9912f.jpg.html)
http://i705.photobucket.com/albums/ww52/driftfreaq/IMG_0739_zpscc03d369.jpg (http://s705.photobucket.com/user/driftfreaq/media/IMG_0739_zpscc03d369.jpg.html)

[Kamiyo]

They look really good. I should be able to pick some up over the weekend (depending on how long direct deposit takes), so I'll be pming you about that in the next couple days or so.

Those heat shields look pretty and shiny. Looking forward to getting a set.

[drift freaq]

They look really good. I should be able to pick some up over the weekend (depending on how long direct deposit takes), so I'll be pming you about that in the next couple days or so.

Those heat shields look pretty and shiny. Looking forward to getting a set.

Thanks for the purchase!

[Philthese93]

I am interested in purchasing your whole set with the heat shields. To my understanding are they $240 all together picked up? I live near LA and I would gladly drive to Hollywood to pick them up :)?

[drift freaq]

I am interested in purchasing your whole set with the heat shields. To my understanding are they $240 all together picked up? I live near LA and I would gladly drive to Hollywood to pick them up :)?
no problem man come on up.

[yaldizzle]

do you still sell the motor mounts with the nismo trans mount, or is this out of the picture now? lol. if so, im interested in buying a set.

[drift freaq]

do you still sell the motor mounts with the nismo trans mount, or is this out of the picture now? lol. if so, im interested in buying a set.
I no longer sell the Nismo trans mount as its pretty much just like a stock trans mount. My trans mount is a much better option.

[drift freaq]

Black Friday Special Time folks.

$249.99 shipped with Heat shield for engine and trans.

Engine mounts with Heat shield $141.99 shipped.

Trans only $129.99 shipped.


paypal is [email protected]

[drift freaq]

get in on it now people

[drift freaq]

This will be extended through Cyber Monday.

[JN1AS4]

I just ordered my set yesterday. I can't wait for them to arrive.

[drift freaq]

Keep those orders coming guys

[richmond82]

Loved my Drift Freaqs Yellows until reinstalling my motor and engine caught one of the studs when leveling and broke the top stud/washer out of the urethane.. Due to being overbudget i bought a set of Circuit sports mounts. I have only started the car 3x (havent even driven it) since installing the fresh build and i can say i hate them and want to get rid of them.. Looking forward to getting a new set from you soon

[drift freaq]

Loved my Drift Freaqs Yellows until reinstalling my motor and engine caught one of the studs when leveling and broke the top stud/washer out of the urethane.. Due to being overbudget i bought a set of Circuit sports mounts. I have only started the car 3x (havent even driven it) since installing the fresh build and i can say i hate them and want to get rid of them.. Looking forward to getting a new set from you soon

Interesting story man, you should pick up a set now at the holiday discount. The Yellows were several designs back, the durometer of the Greens is now 80 vs the Yellows being 70. We also have changed the stud plates improving on the anchoring.

Adding the new heat shields was another factor in our effort to give you a better end product. I found that heat wrapping the mounts was not ideal as it sealed the mount and did not allow room for air cool it should it get hot.

A lot of people were not putting heat wrap on the top which is a primary area of heat as its right below the exhaust and or turbo.
So now we have heat shields as well.

[fearlessKouki]

would the transmission mount/insulator work for rb25det? i need one lmk please thanks

[drift freaq]

would the transmission mount/insulator work for rb25det? i need one lmk please thanks

Sent you a p.m.

[richmond82]

what is your paypal?

[drift freaq]

what is your paypal?

[email protected]

[drift freaq]

I hope everyone had a Merry Christmas the official holiday sale will be ending January 1st . So get those final year end orders in they will ship out next week.

[kam9311]

Interested in mounts. Want to pick some up. Pm me please.

Sent from my EVO using Tapatalk

[ZERTA RACING]

Are we able to buy the heat shields separate?

[drift freaq]

Are we able to buy the heat shields separate?
yes you can they are $15 each

[richmond82]

[email protected]


thanks, my wife picked me up a set from you for christmas. Stoked to put these on and get rid of the circuit sports

[drift freaq]

thanks, my wife picked me up a set from you for christmas. Stoked to put these on and get rid of the circuit sports
very cool of her congrats and have a Happy New Year.

[enriquetc240]

Hey bud you still have tranny mounts?

I so let me know if the price is still $129 so that I can pay you.

Thanks!

[drift freaq]

Hey bud you still have tranny mounts?

I so let me know if the price is still $129 so that I can pay you.

Thanks!
p.m. sent.....

[Migit240sx]

Hey I'm interested in both engine and Tranny mount. I heard you're in Hollywood? Pm price picked up for both please!

Sent from my SGH-M919 using Tapatalk

[drift freaq]

Hey I'm interested in both engine and Tranny mount. I heard you're in Hollywood? Pm price picked up for both please!

Sent from my SGH-M919 using Tapatalk
p.m. sent....

[ProjectPanda13]

When will the next batch of mounts be shipped?

Thanks,
-Dave

Sent from my SGH-T889 using Tapatalk 2

[drift freaq]

When will the next batch of mounts be shipped?

Thanks,
-Dave

Sent from my SGH-T889 using Tapatalk 2


They will be shipping this week Dave. Had so many orders during the sale had to do another run of everything. lol

[ProjectPanda13]

^ sounds good. I can't wait to have these baby installed.
Latez,
-Dave

Sent from my SGH-T889 using Tapatalk 2

[drift freaq]

Just wanted to let people know,new run is in and shipping.

[ProjectPanda13]

I received my mounts and they look good.

Hoping to install soon and hit the track when season opens up.

Latez,
-Dave

Sent from my SGH-T889 using Tapatalk 2

[mjpagan89]

Not sure if it was already mentioned. I have an s14 w/rb26-rb25det trans not sure if these fit or if you make any rb swap specific. LMK please and thank you.

[drift freaq]

Not sure if it was already mentioned. I have an s14 w/rb26-rb25det trans not sure if these fit or if you make any rb swap specific. LMK please and thank you.
Unless the particular setup you are using (which I strongly doubt) stock 240 mounts you would be out of luck.

[240dream]

With these mounts will the motor sit any lower?

[kam9311]

Just want to say. These mounts are amazing. My motor was all over the place before with one broken stock mount. Put these in and I can feel the difference. Feels as if I have better pedal response and the power is put to the ground much more efficiently. Thanks again for the great mounts!

Sent from my EVO using Tapatalk

[drift freaq]

With these mounts will the motor sit any lower?
It will put the engine about 1/2 inch lower than one equipped with Nismo mounts as far as stock mounts go that is a question mark. Reason being a lot of peoples stock mounts are severely worn and sag significantly.

Are you specifically trying to raise your engine? I know some drifters get the idea that they are protecting their oil pan better by trying to do that. Truth be told raising your engine raises your center of gravity and can upset handling in our cars. You want to either keep it in stock position or lower. My mounts do not drop your oil down below the crossmember either. If one is low enough to be concerned about ones oil pan then they should use a skid plate . Which is actually a good idea for any lowered car seeing competition of any sort.

[240boi115]

Do you have Sohc KA motor and tranny mounts? If so I don't live too far away and would like a price of them picked up.

[drift freaq]

Do you have Sohc KA motor and tranny mounts? If so I don't live too far away and would like a price of them picked up.
yes I do and i sent you a p.m. about pickup.

[yurisfriendevan]

Price shipped for engine and trans mounts for a s13 sr20. Thanks

[drift freaq]

Price shipped for engine and trans mounts for a s13 sr20. Thanks

they are $259 shipped. p.m. sent

[EsChassisLove]

Edit-No more troubles! :D

[EsChassisLove]

Lemme get a set of the newest version :)

[EsChassisLove]

Edit-problem solved!

[drift freaq]

People I need to reiterate this. Heat wrapping has been found to be a bad idea
The heat wrap does not allow the mount to breath thereby sealing heat in if they do get hot.

A common mistake people often make with heat wrapping is not putting anything on top of the mount. It is the closest thing to your turbo and therefor absorbs the most heat. If you have used heat wrap and not done anything to the top it can cause failure..

There is a reason even the factory Nissan heat shield is on top and bent over rather than just being on the side. Hence why I made my new heat shields to eliminate the possibility of user error.

I have lots of people running high HP engines with even factory heat shields and not having any problems.

So I reiterate do not use heat wrap pay the money and buy a heat shield.

[deh422]

Can I get the heat shields separately? I bought the mounts a couple ago months before you offered the heat shields but haven't installed them yet.


Sent from my iPhone using Tapatalk

[drift freaq]

Can I get the heat shields separately? I bought the mounts a couple ago months before you offered the heat shields but haven't installed them yet.


Sent from my iPhone using Tapatalk


yes you can

[deh422]

Pm price shipped and paypal


Sent from my iPhone using Tapatalk

[drift freaq]

Pm price shipped and paypal


Sent from my iPhone using Tapatalk


working on it. The main issue seems to be that shipping just a heat shield will cost almost as much as shipping a set of mounts. Its the box size thing, I will have to look into parcel post.

[Irresistible]

Ordered these recently, look to be awesome quality. I should be installing them fairly soon, but I was wondering how much these drop the motor? I just looked under my car at the oil pan and front subframe heights, and they seem to be pretty even with stock motor mounts. I don't want the oil pan to hang too low because my car is stupid low, even though I will be installing a skid plate.

[slow92]

Do you have any pictures of the heat shields? Is it $10 for the heat shields even if I don't buy the mounts (already bought them)? Also, have you heard of anyone having problems with the transmission mount studs not lining up with the transmission cross member? One of the studs lines up but the other one won't unless I drill out the cross member in order to open up the hole.

[drift freaq]

Ordered these recently, look to be awesome quality. I should be installing them fairly soon, but I was wondering how much these drop the motor? I just looked under my car at the oil pan and front subframe heights, and they seem to be pretty even with stock motor mounts. I don't want the oil pan to hang too low because my car is stupid low, even though I will be installing a skid plate.
it will not drop your pan below the crossmember.


Do you have any pictures of the heat shields? Is it $10 for the heat shields even if I don't buy the mounts (already bought them)? Also, have you heard of anyone having problems with the transmission mount studs not lining up with the transmission cross member? One of the studs lines up but the other one won't unless I drill out the cross member in order to open up the hole.

There is a pic of the heatshield on a mount on the first page. The heat shields are $15 separately. You must have purchased your mounts at least 6 months ago. I had a small amount of trans mounts in a run 6 months ago that studs were off a bit this is. I actually pulled product and replaced it. You should have contacted me then. There have been no reported issues with trans mounts since before and after that.

[inRot8ion]

Motor, trans, and heat shield shipped to 94560? And what about if i pick them up?

[drift freaq]

Motor, trans, and heat shield shipped to 94560? And what about if i pick them up?


Its $259 shipped. paypal is [email protected] Pick up? You are welcome to drive down here from the bay area man.

[kenshinS14sks]

paypal sent!

[deh422]

working on it. The main issue seems to be that shipping just a heat shield will cost almost as much as shipping a set of mounts. Its the box size thing, I will have to look into parcel post.

Ok just shoot me a pm or something with price for heat shields when you get it figured out.

[drift freaq]

Ok just shoot me a pm or something with price for heat shields when you get it figured out.

Ok will do.

[xpl2007]

Ok need these for s13 coupe were do we meet up this weekend>?
Thanks.
Jeff

[drift freaq]

Ok need these for s13 coupe were do we meet up this weekend>?
Thanks.
Jeff
sent you a p.m. Oh and yes people I have figured out some pricing for heat shields separately.

It's basically this Heat Shields are usually one per set. It would be $25 shipped to most places in the U.S. If you want to play doubly safe and buy two you can I will do pairs at a discount So $35 shipped for a pair.

[xpl2007]

Payment sent.

[xpl2007]

Sent out yet have not herd anything yet?
Thx

[RocketBUNNY]

With all these great reviews I think I'll have to try out your motor and trans mounts. I'll have to wait until the end of the month though :( but don't really matter I'm still waitin on new fuel line.

[drift freaq]

Sent out yet have not herd anything yet?
Thx
Ya you paid me on friday. Its been like 2 business days.

People you have to realize something. If you pay for mounts and I do not instantly contact you its not like I did not get the payment. I usually p.m. people If I have not received payment. Also I ship items one or twice a week. So It means your item may not ship for a day or two after receiving payment. I ship priority mail so they ship quickly once shipped.
In almost all cases items are shipped within a week of payment. So relax do not freak. If you need an item faster you have to let me know ahead of time.

[RocketBUNNY]

Geez some peoples are so impatient lol

[delado]

pm'd my dood

[xpl2007]

Sorry for my customers when they buy something I send it out soon as they pay for it. And Zilvia can be fun sometimes.
Thanks for the update.

[drift freaq]

Sorry for my customers when they buy something I send it out soon as they pay for it. And Zilvia can be fun sometimes.
Thanks for the update.

Really guy, this ^^^^^^ comes off kinda backhanded.

It used to be when one ordered something on the net it took up to 3 weeks to get it if you were lucky.

Considering I ship within 2-3 business days and I ship priority mail. Well pretty much means the customer usually gets their item within a 1 week turnaround time frame.
Like you will be receiving yours.

Noting unacceptable about that last time I checked.


I am glad you can ship the same day some of us have very busy lives and cannot always ship the same day.

Though I am upfront about the fact that it usually takes 2-3 days for it to ship.

Plus like I said earlier if someone wants it faster all they have to do is let me know ahead of time. I.E. ask when ordering.

[xpl2007]

Just came in.
Thanks.

[xpl2007]

Installed...
Easy to install and take out vs stock or Nismo.
Little more vibration then I thought.
Engine sounds louder.
Tranny feels better, smoother.
Seem more RWHP put down.
Not bad.
Thanks again.
PS
I would make a better heat shield so it dosnt trap heat or have people use the stock ones... Bigger washers too. Stainless steel is the way to go.

[slow92]

^^^^^
Wow dude. Maybe you should start producing your own motor mounts and heat shields and sell them here on Zilvia. You are being pretty critical. If you want a bigger washer then you could always go to your local hardware store and purchase one for $0.10 or so.

So far these are the best motor/trans mounts I have come across.

[xpl2007]

No thanks just giving input.
I like the stock feel, not sure how much vibration you guys love but this is not a track car.
For the price I would like Nismos and keep the tranny.
After 20 240sxs, silvia ks, Nissan gtir, Nissan skyline GT St 4 door, and a new z, kinda know what I'm talking about.
I like the mounts but for the price and vibration...there OK.

[spartanmisfit]

Anyone have pics of these installed?

Sent from my DROID RAZR HD using Tapatalk

[racepar1]

I would make a better heat shield so it dosnt trap heat or have people use the stock ones... Bigger washers too. Stainless steel is the way to go.

The heat source is on the top (exhaust mani/turbo). The shield doesn't trap heat unless you installed it upside down. It deflects the heat away from the mount. That heat shield is FAR superior to the stock one for this application.

No thanks just giving input.
I like the stock feel, not sure how much vibration you guys love but this is not a track car.
For the price I would like Nismos and keep the tranny.
After 20 240sxs, silvia ks, Nissan gtir, Nissan skyline GT St 4 door, and a new z, kinda know what I'm talking about.
I like the mounts but for the price and vibration...there OK.

How many Nissans you have owned has nothing to do with how knowledgeable you are about the engineering behind the products you buy.

The price of the engine mounts is really pretty damn cheap. There isn't really anything else on the market to compare it to. Nismos are nothing but overpriced stock mounts, ESPECIALLY the trans mount. Anything else on the market that I have seen, regardless of price, is either an utter POS or overpriced stock shit.

The tranny mount is the expensive part, BUT it is FAR superior to anything else that I have seen on the market.

I can appreciate that the mounts are too stiff for your liking, but some of the stuff you are saying is just non-sense.

[drift freaq]

No thanks just giving input.
I like the stock feel, not sure how much vibration you guys love but this is not a track car.
For the price I would like Nismos and keep the tranny.
After 20 240sxs, silvia ks, Nissan gtir, Nissan skyline GT St 4 door, and a new z, kinda know what I'm talking about.
I like the mounts but for the price and vibration...there OK.

Actually the slight vibration you are feeling at idle is not from the engine mounts. It is from the trans mount. While the engine mounts are definitely stiffer than stock or Nismo, people running the engines only have never felt a vibration issue.

The trans mount on the other hand is significantly stiffer than the factory one. As every aftermarket trans mount application is. I can honestly say in my own personal experience , my competitors trans mounts have felt the same way while not delivering as complete of a solution as mine.




In answer to your heat shield comment Racepar pretty much summed it up.

[xpl2007]

Yeah I like the tranny mount the best. Works great. Smooth. Heel toe down shift is great.
Ill get use to the vibration.
Cant believe that the Nismos went so much up in price.

[drift freaq]

Yeah I like the tranny mount the best. Works great. Smooth. Heel toe down shift is great.
Ill get use to the vibration.
Cant believe that the Nismos went so much up in price.

We'll like I said the slight vibration you are experiencing is from your trans mount but it only really happens at idle.

[xpl2007]

3 tuners said the same thing when they tested my car...
Got in and said WTF!

[drift freaq]

I just wanted to let you guys know we are currently in the process of making a fresh run of product. All orders taken this week will be shipped out next Monday or Tuesday. Sorry for the delay guys it's been a busy month.

[ser20det]

can u tell me the thickness of the mount so it ll give me an idea how much lower its gonna be from what i have now ?


Envoyé de mon iPhone Ã* l'aide de Tapatalk

[drift freaq]

can u tell me the thickness of the mount so it ll give me an idea how much lower its gonna be from what i have now ?


Envoyé de mon iPhone Ã* l'aide de Tapatalk

You mean the height which is just about 2.75 inches

[SRSouljah]

payment sent! pumped to get these! only heard good things!

[1fastsr20]

Glws


Sent from my SAMSUNG-SGH-T989 using Tapatalk

[andrewherpderp]

How long are these available?

Sent from my SGH-M919 using Tapatalk

[drift freaq]

How long are these available?

Sent from my SGH-M919 using Tapatalk

A fresh run has just been being finished up.

[s13silvia123]

whats the durometer rating

[EmpyreS13]

His FIRST post says it right there. "These are 80 durometer track tested high quality polyurethane engine and trans mounts."

[drift freaq]

All current orders are in shipment.

[kenshinS14sks]

Just put them in today. Car feels so solid! But now my bumper vibrates hahaha, any suggestion on how to fix this?

[Riedell]

Still using FIRST DESIGN mount, and give a vouch for drift freaq again.

Once these mounts go, I'll be ordering again from you. If you leave this page from non-purchasing these mounts, you're making a big mistake. Don't second think these mounts, because you're only second thinking of what you're going to buy outside from drift freaq when it comes to the motor and trans mounts.

[drift freaq]

Still using FIRST DESIGN mount, and give a vouch for drift freaq again.

Once these mounts go, I'll be ordering again from you. If you leave this page from non-purchasing these mounts, you're making a big mistake. Don't second think these mounts, because you're only second thinking of what you're going to buy outside from drift freaq when it comes to the motor and trans mounts.

Thanks for the prop man.

[tacotacotaco]

I take it you didnt get my PM concerning my shipping address.

[drift freaq]

I take it you didnt get my PM concerning my shipping address.

Ah man , I missed that p.m. I am so used to going off paypal addresses when I get busy I don't always double check. It went your Oceanside address that's on your paypal. Sorry about that .

[drift freaq]

Keep those orders coming people

[SeizureNoodles]

Just got my mounts in today, thanks for the fast shipping! Ordered after all my other parts and received before half of my parts even were shipped. They are looking solid, was surprised that it only came with one heat shield, but I suppose you only need one for the hot side...

I am using these in my RB20 swap, I will throw up pictures of the install later. I am sure they will fit and am surprised you haven't put RB up there with all the other engines. Just would have to specify that we need a R32 or R33 crossmember and auto KA tranny mount.

[240addiction]

Order placed!

[drift freaq]

Order placed!

Received and shipped. All current orders have been shipped as well keep them coming people.

[ae13bravo]

I need a complete set of mounts. My car is up on Jack stands in my driveway with motor and trans out. The city left me a little nasty message saying that if I don't move the car within 10-15 days that it will be towed. How long does priority mail take to reach the mid west? Trying to have the car put back together this coming weekend.

Sent from my SPH-L720 using Tapatalk

[drift freaq]

I need a complete set of mounts. My car is up on Jack stands in my driveway with motor and trans out. The city left me a little nasty message saying that if I don't move the car within 10-15 days that it will be towed. How long does priority mail take to reach the mid west? Trying to have the car put back together this coming weekend.

Sent from my SPH-L720 using Tapatalk

Ah 2-3 days you posted this on Friday are we talking next weekend? If so it would be no problem getting thm to you in time. P.m. Me.

[ae13bravo]

Ah 2-3 days you posted this on Friday are we talking next weekend? If so it would be no problem getting thm to you in time. P.m. Me.

Yup. Need them by the end off this week. I'll PM you.

Sent from my SPH-L720 using Tapatalk

[ae13bravo]

Paypal is asking me for you country of residence as well as your first and last name after I enter your Email. First time it ever asks me this. Does this sound right?

[pac579]

payment sent.

[ae13bravo]

You got paid! Sorry I must have been doing something wrong when copying and pasting your email on Paypal.

[isixphill]

Payment sent!! thanks!

[Trinidrift3]

payment sent for full set with heat shield

[jame5x]

What is a good price to have these installed at a shop? I need to replace my mounts and looking to purchase these.

[Rich260z]

I think paid $50. I was out of the country and my gf was driving my car. But the shop knew me and my car. If its a place that's you e never been to expect to pay about an hour and half of their time.

[ae13bravo]

Thanks! Got them in the mail today.

Sent from my SPH-L720 using Tapatalk

[drift freaq]

What is a good price to have these installed at a shop? I need to replace my mounts and looking to purchase these.

Where are you located?

[jame5x]

Where are you located?

San Diego.

[drift freaq]

San Diego.

Ah well it should be able to be done in less than an hour. Basically shop rates are usually $70 an hour. So figure around $50

[elucid]

do your new green engine mounts still adjust height by spinning them?

[jame5x]

Ah well it should be able to be done in less than an hour. Basically shop rates are usually $70 an hour. So figure around $50


Thanks, I'm gonna go quote around tomorrow. I will order a set next payday.

[drift freaq]

do your new green engine mounts still adjust height by spinning them?

The studs are centered now and set the engine at the ideal position. I had customers trying to raise their engines when they were adjustable. The problem was I made them adjustable so people could lower the engine as a lower center of gravity is better. But..... These guys had their cars way to slammed and were afraid of scraping their oil pans. When you raise the engine it puts the mount at a severely leveraged angle which is not good for the mount and could cause failure.

The easiest way to correct the issue was what I did with the new design. They still work great and people love them.

[SeizureNoodles]

Are these mounts taller than the KA mounts? I just checked my RB20 and these mounts are about half an inch taller... :\

[drift freaq]

Are these mounts taller than the KA mounts? I just checked my RB20 and these mounts are about half an inch taller... :\

No they are not taller than KA mounts. If your KA mounts were old though they would most likely be sagging as the rubber does that when it gets old. The Nismo mounts are the same height as stock new KA mounts and my mounts are a 1/2 inch shorter.

[elucid]

The studs are centered now and set the engine at the ideal position. I had customers trying to raise their engines when they were adjustable. The problem was I made them adjustable so people could lower the engine as a lower center of gravity is better. But..... These guys had their cars way to slammed and were afraid of scraping their oil pans. When you raise the engine it puts the mount at a severely leveraged angle which is not good for the mount and could cause failure.

The easiest way to correct the issue was what I did with the new design. They still work great and people love them.

I see, if you have the older style mounts with the offset bolts i will take a set, i need to lower the engine.

[drift freaq]

I see, if you have the older style mounts with the offset bolts i will take a set, i need to lower the engine.

The mounts currently set your at the ideal position which is the lowest that the offset mounts did.

[sean2000gt]

Sent you a pm!

[drift freaq]

Sent you a pm!

Got it man.

[williamb]

Just ordered engine mounts

[drift freaq]

Just ordered engine mounts

Got it and they have been shipped.

[status_ryan]

Just sent payment for full set. Super pumped!!

[drift freaq]

Just sent payment for full set. Super pumped!!

Got it and it's been shipped.

[zombiewolf513]

Got these mounts. Love em.

[drift freaq]

sale is over.

[drift freaq]

I see, if you have the older style mounts with the offset bolts i will take a set, i need to lower the engine.

I need to clarify this. The current engine mounts are only a possible 1/4 inch different in height to the old offset ones. It's really not enough to make any difference.

If you are having hood cleanse issues due to bad knock off aftermarket vented hoods you should not have bought those hoods.


I should add that that depending on the the engine you are running the trans mount may cause some minor vibrations due to it being much stiffer than the stock trans mount which was purposely made wimpy by Nissan to cut down on vibration. Any aftermarket trans mount is going to cause a bit of vibration if it is actually a real upgraded mount. These mounts also have to take time to set in, after that the vibration diminishes.

Nismo trans mounts are really not an upgrade but actually just a stock replacement. You will not yield the benefits of an actual aftermarket upgraded one.[/SIZE]

[drift freaq]

I am going to extend this out a few more days for those that did not see it yet.

[jame5x]

Payment just sent!

[SeizureNoodles]

Just wanted to update that these mounts are legit. The engine mounts didn't fit my RB with R32 crossmember, but that wasn't advertised, just me not quadruple checking that they would fit. The Trans mount is amazing though, I test drove my car today and was able to shift easily without a shift nob. Try it sometime with your current mounts and I can almost guarantee it will be a bitch.

[drift freaq]

Thanks for the props. Keep those orders coming people the sale will run till the end of the week.

[gnozahs]

Tranny mounts are great. Installed and shifter doesn't move around or jump up and down on freeway anymore like it used to.

[drift freaq]

Tranny mounts are great. Installed and shifter doesn't move around or jump up and down on freeway anymore like it used to.

See now like I have stated for the people who spoken up about vibration . If it really was that bad people would not be making posts like above. You get a slight vibration at idle with some engines because it's very solid but what is written above is the excellent tradeoff you get.

[drift freaq]

This sale will end tomorrow people.

[jame5x]

Got mine today. Thanks for the Von's ad, I needed eggs.

[drift freaq]

Got mine today. Thanks for the Von's ad, I needed eggs.

Hahahaha glad to help.

[driftheart]

Hey drift freaq, how much for the tranny mount and a motor mount shield shipped to 07503?

[drift freaq]

Hey drift freaq, how much for the tranny mount and a motor mount shield shipped to 07503?

That would be $259 shipped

[Yad]

How much for the motor mounts with heatshield for a ka24de shipped down to 00909 thank in advance

[drift freaq]

How much for the motor mounts with heatshield for a ka24de shipped down to 00909 thank in advance

$151 shipped because I use priority mail.

[Yad]

Payment sent i cant wait to have these bad boys installed

[jame5x]

I'm still looking for a shop that'll install these. Can't seem to find a shop that charges less than $200. I was looking at them this morning and my motor mounts have these on the thread. I tried to hand tightening the nut to see if I can thread the excess out but was kind of hard so I stopped. Is this normal?

http://i57.tinypic.com/16atuep.jpg

Sorry, not sure how to resize the pic.

[drift freaq]

That is just excess, it will clean out of the threads when you tighten down the nut.

[Southie240]

Payment sent can't wait for a quality set of mounts

[Sneak36]

Quality items here, would buy again. Thank you for my set!

[drift freaq]

Thanks for the props guys.

[BiG MiKE86]

These available in custom heights?

[drift freaq]

These available in custom heights?

Ah no they are the height that I make them.

[Nezahualcoyotl]

available for pick up?

[drift freaq]

available for pick up?

Yes they are

[BiG MiKE86]

Ah no they are the height that I make them.

fUG.. I'd like something besides a solid mount @ 2.125-2.1875" tall

2JZ-S13

[drift freaq]

fUG.. I'd like something besides a solid mount @ 2.125-2.1875" tall

2JZ-S13

I am p.m. Ing you right now. I have a mount for another that actually is very close to that spec. It's actually just over 2 inches tall with. 3 inch diameter. It was actually a prototype design Miata mount. I do not have heat shields for it though.

[BiG MiKE86]

I am p.m. Ing you right now. I have a mount for another that actually is very close to that spec. It's actually just over 2 inches tall with. 3 inch diameter. It was actually a prototype design Miata mount. I do not have heat shields for it though.

PM'd ya back! Im running a top mount setup so im not terribly worried about having a heat shield

HMU - lets make a deal :)

[alwyzDTF]

Havent come across enough information to make me comfortable making the purchase, so reaching out to anyone rocking these with a 2jz in an s14...are there any fitment issues?

Im also trying to find out if my zerolift autolab mounting brackets are going to play a factor in this and possibly throw something off or not.

[drift freaq]

Good luck with that^^^^^^^^

[HORShi]

Havent come across enough information to make me comfortable making the purchase, so reaching out to anyone rocking these with a 2jz in an s14...are there any fitment issues?

Im also trying to find out if my zerolift autolab mounting brackets are going to play a factor in this and possibly throw something off or not.

I don't have a 2JZ....BUT I may have some info that could be helpful to you. First off, THESE MOUNTS ROCK...trust me, I was highly skeptical, you can even ask DriftFreaq himself, I bought the Engine mounts first and then Trans cause I was highly skeptical. When i recieved the motor mount, it looked like a giant ass roller skate wheel lol. I looked at it like wtf is this shit? Haha. But man the quality and design was amazing and solid. So I order the trans mount about a week ago cause I was just impressed with it man.

Now the part you may be interested in...

For the engine mounts, I took it to the shop (My friend came with me, because he has an RB25 with zerolift mount kit) because I was honestly unsure how it would go on. I took it to this custom shop here in Columbus, OH named Brown's Auto. You can look them up, they have a nationally recognized 300zx with a V8...custom everything, so they know what they was doing. Of course me and the son of the owner tried a direct method to installing the motor mounts but it would not line up straight up for some reason. So I had the cross-member slotted and drill to give the mounts additional further adjustment if I choose to. Is it necessary for the KA? No but seeing that the mounts design allowed me to be flexible with my mounting, why not? It lowered my engine definitely by an 1 1/2 measuring from my strut brace on my KA and close to the same amount on my friends RB. It definitely help the cars balance and better CoG (Center of Gravity) seeing that you have a bigger engine and longer engine, you may have to perform the modifications like I and my friend did. Like I said he has a RB did the same thing also with his zerolift mount kit and modified his also to compensate. It was NOT a hassle, nor hard to get done man, cause it provides with pretty much you complete choice on how you want your engine to sit cause how the mounts are designed.

I just installed them 3 days ago and mannnnnn...it truly feel as if the engine/trans is connected to the car, yet feels almost stock. Yes like stock, what do I mean exactly? NVH is damn near close to stock, I personally didnt feel any vibration what so ever. There is a extremely, and I mean extremely very little a idle, but I mean you have to be like a grandma and drive with no music on, windows rolled up to and actually dedicating mental power from your brain to focus and paying attention to feel it man lol seriously man. It feels damn near close to stock, and me personally I like the very extremely little NVH that you have to seriously pay attention to lol, it makes the car feel alive and connected.

I'm sorry for the long post, but trust me, I thought these mounts was going to bullshit straight up. I can't stand gimmicky type of shit. It registered to me as one of those things that's "too good to be true". But man, this so far the best mod yet I did to my KA-T project and my friend can vouch also with his RB. I can get you pics of the install and post them. Trust me man, and I know it's hard to just go by a bunch of peoples reviews posted on Drift Freaq's thread, but man If Drift Freaq happens to start manufacturing race mounts for all Japanese cars and make a dedicated business to put on the market...I'll happily invest into his company without even thinking twice. I'm a hard person to please when it comes to performance. I live in the Midwest and our enviroment is brutal on our cars. If you want it to last, simply you want to spend the money and good quality shit (No offense against ebay or any other brands ebay offshoots like that) but I will not put dog shit on my car, especially anything mechanically.These mounts ARE top quality. Their better than literally every other after market mounts I have encounter, even Nismo. Yet their bottom dollar. Best >$1000 I spent on my car to date.

I will like I mentioned before upload videos and pictures. I have them posted to my Instagram, so I'll get them off that and post them on here for everyone to see that these are legit.

[angel mkiv]

Hey any 4th of July sales goin on?

[TwelveAM]

Hey any 4th of July sales goin on?

:hide: I would pick up a full set if they go on sale.

[angel mkiv]

Same here I'm paypal ready!^^

[drift freaq]

You guys know me to well lol. Fourth of July sale is on $249 shipped fora full set $131 shipped for trans mount $146 shipped for engine mounts with heat shield. PayPal is [email protected]

[alwyzDTF]

I don't have a 2JZ....BUT I may have some info that could be helpful to you. First off, THESE MOUNTS ROCK...trust me, I was highly skeptical, you can even ask DriftFreaq himself, I bought the Engine mounts first and then Trans cause I was highly skeptical. When i recieved the motor mount, it looked like a giant ass roller skate wheel lol. I looked at it like wtf is this shit? Haha. But man the quality and design was amazing and solid. So I order the trans mount about a week ago cause I was just impressed with it man.

Now the part you may be interested in...

For the engine mounts, I took it to the shop (My friend came with me, because he has an RB25 with zerolift mount kit) because I was honestly unsure how it would go on. I took it to this custom shop here in Columbus, OH named Brown's Auto. You can look them up, they have a nationally recognized 300zx with a V8...custom everything, so they know what they was doing. Of course me and the son of the owner tried a direct method to installing the motor mounts but it would not line up straight up for some reason. So I had the cross-member slotted and drill to give the mounts additional further adjustment if I choose to. Is it necessary for the KA? No but seeing that the mounts design allowed me to be flexible with my mounting, why not? It lowered my engine definitely by an 1 1/2 measuring from my strut brace on my KA and close to the same amount on my friends RB. It definitely help the cars balance and better CoG (Center of Gravity) seeing that you have a bigger engine and longer engine, you may have to perform the modifications like I and my friend did. Like I said he has a RB did the same thing also with his zerolift mount kit and modified his also to compensate. It was NOT a hassle, nor hard to get done man, cause it provides with pretty much you complete choice on how you want your engine to sit cause how the mounts are designed.

I just installed them 3 days ago and mannnnnn...it truly feel as if the engine/trans is connected to the car, yet feels almost stock. Yes like stock, what do I mean exactly? NVH is damn near close to stock, I personally didnt feel any vibration what so ever. There is a extremely, and I mean extremely very little a idle, but I mean you have to be like a grandma and drive with no music on, windows rolled up to and actually dedicating mental power from your brain to focus and paying attention to feel it man lol seriously man. It feels damn near close to stock, and me personally I like the very extremely little NVH that you have to seriously pay attention to lol, it makes the car feel alive and connected.

I'm sorry for the long post, but trust me, I thought these mounts was going to bullshit straight up. I can't stand gimmicky type of shit. It registered to me as one of those things that's "too good to be true". But man, this so far the best mod yet I did to my KA-T project and my friend can vouch also with his RB. I can get you pics of the install and post them. Trust me man, and I know it's hard to just go by a bunch of peoples reviews posted on Drift Freaq's thread, but man If Drift Freaq happens to start manufacturing race mounts for all Japanese cars and make a dedicated business to put on the market...I'll happily invest into his company without even thinking twice. I'm a hard person to please when it comes to performance. I live in the Midwest and our enviroment is brutal on our cars. If you want it to last, simply you want to spend the money and good quality shit (No offense against ebay or any other brands ebay offshoots like that) but I will not put dog shit on my car, especially anything mechanically.These mounts ARE top quality. Their better than literally every other after market mounts I have encounter, even Nismo. Yet their bottom dollar. Best >$1000 I spent on my car to date.

I will like I mentioned before upload videos and pictures. I have them posted to my Instagram, so I'll get them off that and post them on here for everyone to see that these are legit.


HAHAHAHA I'm glad you really like your mounts haha I know the quality of these. There's no question about that. I think the price is great for everything as well. I figured more people would have tried these with their 2j s-chassis. Thanks for the recommendation, that alone just about convinced me to buy them and make them fit if I end up needing to.

[drift freaq]

HAHAHAHA I'm glad you really like your mounts haha I know the quality of these. There's no question about that. I think the price is great for everything as well. I figured more people would have tried these with their 2j s-chassis. Thanks for the recommendation, that alone just about convinced me to buy them and make them fit if I end up needing to.

Order now Holiday pricing.

[jerryscherry]

Order now Holiday pricing.

when your sale end :D?

[drift freaq]

when your sale end :D?

It will run through the weekend.

[danny92]

Would you ship international? Located in NZ. Been hearing really good reviews about your engine/trans mounts. Let me know!

[drift freaq]

Would you ship international? Located in NZ. Been hearing really good reviews about your engine/trans mounts. Let me know!

I do ship internationally. In fact I have shipped to NZ and OZ. Prices ar workd out individually based on per country shipping quotes.

[mixeds14]

I keep reading nothing but good reviews on these mounts, I'm goin to give it a try. Let me know if u still have some available so I can pay pal u the money for the engine mounts. Tranny mount will have to wait as I I'm on a budget ATM..

[omgRWDgoodness!]

Just sent payment for a full set, thanks.

[drift freaq]

Ok guys I will let this run till tues mid day.

[drift freaq]

The sale is over just to let everyone know.

[Akop]

These mounts are amazing. I purchased them this week for my S14 (has a ka). First off, installation took me just under an hour with standard tools. After installation, I took the car out for a test drive with the new mounts. At first the car had a low frequency vibration from 2200-2600rpm, very noticeable. But after driving the car too and from school (about 15 miles) the vibration become noticeably less. On a scale from 0-10, 10 being most comfortable, I would give the mounts a rating of 8.5/10 for the comfort category, considering that I do have solid SPL subframe and differential mounts. After installing the mounts, shifting feels fucking awesome. It feels SO direct and solid, just like a short shifter. The car accelerates much better. Although I haven't been to the track or canyons with these mounts yet, I can definitely feel a positive effect on the handling characteristics of the car. Overall these mounts are WELL worth the money, and I would recommend these to anyone, for track and daily driving. Good stuff Dave. Thanks again for putting time and effort in making these mounts amazing and affordable.

[ov1989]

I think I just found my trans mount :)

[drift freaq]

I think I just found my trans mount :)

Step up and buy it man.

[goldens14]

Where are you located?

[drift freaq]

Where are you located?

Los Angeles.....

[fast panda]

payment sent for engine mounts.

[drift freaq]

Got it man^^^^^^^^

[drift freaq]

Fresh batch of mounts rolling off the line this week.

[fast panda]

When will they be shipping?

[drift freaq]

Mounts will start shipping Monday if not Tuesday the new run is done and I am extremely busy.

[drift freaq]

Just to let everyone know mounts are shipping out but I got an ear infection that had me pretty immobile for a couple of days. I am back on my feet though living on antibiotics mmm yuck. lol

[drift freaq]

all current orders are in transit. People should see them tues-wed.

[drift freaq]

Any orders placed between today and wed afternoon will ship wed afternoon at the latest. Mounts are in stock and I am fully recovered from my ear infection and back up to speed.