CA Drift Freaq Polyurethane Engine & Trans Mounts! FINAL CLEARANCE SALE! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

drift freaq · 04-26-2013, 01:49 PM

These are 80 durometer track tested high quality polyurethane engine and trans mounts. There is a link in my sig that will take you to a multi page review. Lots of people here are using my mounts.

[B]The studs do not run straight through the center of these mounts unlike other brands.
You will not get any excessive vibrations from these because of this.
You will get mounts that are better than Nismo and do not rattle your teeth.

A trans mount replacement is recommended as most 240sx stock trans mounts are worn by now. Unless it's been replaced previously. If your shifter moves around a lot your trans mount is probably worn out.
See below for the solution.

Drift Freaq Trans Mounts
The trans mount has exhaust hanger studs!! It also improves your shifting because your transmission no longer moves around under your shift lever like stock. Because of this you get a the effect of having a short shifter without really having one. The shift lever goes straight into its gates quickly and with less effort.

You may experience minor vibrations from the trans mount compared to the feel of a stock trans mount. The trans is responsible for a lot of NVH in our cars hence why Nissan put in the wimpy stock trans mount that let's you shifter wiggle all over. This vibration will diminish as the mounts set in.

I also should point out that the nuts that are provided are Nyloc which means you do not need to torque them down hard. A hand wrench is fine for tightening them. Do not use an air ratchet or impact gun.

This is the latest design with centered studs (that are not connected) in British Racing Green.

Ok Guys this is it we are entering Final days. I am leaving the business. I will be having an End of Business sale with fairly decent discounts.

Which you see below this will be a sale til end of stock.

There will also be no heat shields sold as they are going out of production

$136 shipped for trans mount.

$136 shipped for a set of mounts

$255 shipped for a set of mounts with trans

All sales are final i.e. No returns because you decide you don't want or need them. So please make sure you want/need the item before making your purchase.

my paypal is [email protected]

DJ-of-E · 04-30-2013, 01:34 AM

So you finally have a sticky thread. =P

I can attest that these mounts can handle pretty damn over 1000lbs worth of abuse. I know, I did some stupid shit with the engine hoist and forgot to "unbolt" the bottom of the engine mount.

denian_cellphone · 05-02-2013, 11:28 PM

best mounts on the market!

lalo167 · 05-05-2013, 01:57 AM

Just started my car up for the first time with these on and my motor did not shake one bit during idle!! Put a penny on the valve cover and it was super still. Great mounts!

[email protected] · 05-05-2013, 02:39 PM

Can locals pick up after the 10th?

drift freaq · 05-06-2013, 10:18 AM

Quote:

Originally Posted by [email protected]

Can locals pick up after the 10th?

yes local pickup will be available after the 10th.

AsleepAltima · 05-06-2013, 09:37 PM

i might have to get me the trans mount. tired of feeling my shifter move.

zerodameaon · 05-07-2013, 04:49 PM

Have been telling myself I need to buy a set of these for a very long time. Finally did and my teeth are going to be very happy to see those other mounts I have go away.

AJZax · 05-09-2013, 11:41 AM

These are on my pro-am car. Actually fairly comfortable

Even when paired with xcessive solid trans mount (Z32 conversion). I'm VERY happy and I'll be recommending them to everyone in NW region who's looking for mounts

Motor stays very planted, but car doesn't loosen bolts ^_^. It's comfortable. I'm most likely going to buy these for my street/daily s14 car I'll be "building". I'm sure it'd be even smoother with drift freaq trans mount instead of the metal to metal trans mount from xcessive, lol.

I recommend these!

Rich260z · 05-09-2013, 01:53 PM

Seriosuly these rock, was using the mounts just on the motor and when started getting parts for a 5 spd swap I knew what tranny mount to get.

zerodameaon · 05-10-2013, 03:41 AM

They ship today

Can't wait.

ATLspeed · 05-10-2013, 07:46 PM

whats the height of these compared to stock or nismo motor mounts. I have a 2jz in mine s13 and my window weld filled mounts have my oil pan sitting level with my subframe.

Car is slammed and oil pan would like some more safety besides my skid plate.

I'm between your mounts and Xcessive mounts.

Thanks

drift freaq · 05-10-2013, 11:13 PM

Quote:

Originally Posted by ATLspeed

whats the height of these compared to stock or nismo motor mounts. I have a 2jz in mine s13 and my window weld filled mounts have my oil pan sitting level with my subframe.

Car is slammed and oil pan would like some more safety besides my skid plate.

I'm between your mounts and Xcessive mounts.

Thanks

The height of the mount or how high it makes your engine sit? Nismo mounts raise your engine up about an inch my mounts will drop your engine down about 1/2 inch to 3/4 of inch though the oil pan will not sit below the crossmember. I am not sure how deep the 2j pan runs in comparison to KA or SR pans. If you want a set of mounts that are not going to rattle your teeth then you will want my mounts.
My mounts are right around 2 and 3/4 inches tall.

zerodameaon · 05-14-2013, 08:02 PM

Coming from the temporary(that was not so temporary) fix of Circuit Sports mounts after my stock ones broke, these things are amazing. These feel very nice, very little vibration and they honestly feel way more responsive than the CS mounts. Its also very nice to not have to guess where the transmission is going to be under your car as its bouncing around.

These are great thanks!

ICOMPLAINALOT · 05-18-2013, 03:10 PM

When will these ship out if I order?

Posted from Zilvia.net App for Android

ICOMPLAINALOT · 05-18-2013, 03:58 PM

And will they work with my zerolift 1jz s14 swap mounts? The mounts work with the stock engine and Trans mount so I assume it will

Posted from Zilvia.net App for Android

Dirtcanhurt089 · 05-19-2013, 06:44 AM

You have my attention lol ill be ordering a set in the next 2 weeks I need mounts baddd

Sent from my HTC VLE_U using Tapatalk 2

drift freaq · 05-19-2013, 01:35 PM

Quote:

Originally Posted by ICOMPLAINALOT

And will they work with my zerolift 1jz s14 swap mounts? The mounts work with the stock engine and Trans mount so I assume it will

Posted from Zilvia.net App for Android

They should work fine. As far as shipping goes it is usually pretty fast but i do say allow up to weeks time from ordering for shipping. As far as shipping time itself goes I ship priority mail so you usually see the product in 2-3 days from actual shipment date.

801nismo104 · 05-19-2013, 03:02 PM

you should have a memorial day sale discount

i bet you will sell alot of sets.

drift freaq · 05-19-2013, 09:47 PM

Quote:

Originally Posted by 801nismo104

you should have a memorial day sale discount

i bet you will sell alot of sets.

Ya you would like that. Don't expect it to happen now though. You suggested it. LOL

TwelveAM · 05-21-2013, 07:17 PM

I'll be picking up a tranny mount soon. My car hops all over the place.

Been reading nothing but good reviews on your mounts.

trainwreck 14 · 05-25-2013, 11:47 PM

Why is shipping so expensive on these? I would consider buying if the cost wasn't so disproportional.

drift freaq · 05-27-2013, 08:47 PM

Quote:

Originally Posted by trainwreck 14

Why is shipping so expensive on these? I would consider buying if the cost wasn't so disproportional.

Perhaps you do not understand the breakdown . Shipping for a set of engine mounts is a flat $16 and for engine and trans is $19 due to the extra weight. The price of the engine mounts is $120 the price of the trans mount is $120 when you buy them together you actually get a $10 discount.

ICOMPLAINALOT · 05-27-2013, 11:22 PM

From the reviews I've been reading the 19 bucks is probably totally worth it

Posted from Zilvia.net App for Android

zerodameaon · 05-28-2013, 02:03 AM

Quote:

Originally Posted by trainwreck 14

Why is shipping so expensive on these? I would consider buying if the cost wasn't so disproportional.

If this is stopping you, you are really missing out. These are still a deal for the quality you are getting, think of it this way, they cost 249 bucks and you get free shipping.

drift freaq · 05-28-2013, 12:00 PM

Quote:

Originally Posted by zerodameaon

If this is stopping you, you are really missing out. These are still a deal for the quality you are getting, think of it this way, they cost 249 bucks and you get free shipping.

I might use this in marketing $249 Free shipping! LOL Seriously the shipping cost is less than 10% of the actual purchase price which is no way disproportional.

Driftwurks · 05-28-2013, 02:51 PM

Awesome mounts! Ran them on my S13 and they felt great. Combined with Amsoil transmission fluid, my shifts felt very crisp and fell right into place (none of that wiggling bull on the freeway that you get with stock, worn out mounts).

racepar1 · 05-29-2013, 07:06 PM

Quote:

Originally Posted by trainwreck 14

Why is shipping so expensive on these? I would consider buying if the cost wasn't so disproportional.

Really... just... REALLY?!?!

So you're saying you would buy them if shipping was $5 cheaper? That doesn't even make sense, talk about a CHEAP ASS...

I guess people's time isn't worth anything to you.

ICOMPLAINALOT · 05-29-2013, 08:42 PM

Do I just send you the money and leave my address in the notes then you'll ship out?

Posted from Zilvia.net App for Android

drift freaq · 05-30-2013, 11:07 PM

Quote:

Originally Posted by ICOMPLAINALOT

Do I just send you the money and leave my address in the notes then you'll ship out?

Posted from Zilvia.net App for Android

That is correct. You paypal me and if your address is not in your paypal leave it in a note and I ship them.

paypal is [email protected]

04-26-2013, 01:49 PM	#1
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,558 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	Drift Freaq Polyurethane Engine & Trans Mounts! FINAL CLEARANCE SALE! These are 80 durometer track tested high quality polyurethane engine and trans mounts. There is a link in my sig that will take you to a multi page review. Lots of people here are using my mounts. [B]The studs do not run straight through the center of these mounts unlike other brands. You will not get any excessive vibrations from these because of this. You will get mounts that are better than Nismo and do not rattle your teeth. A trans mount replacement is recommended as most 240sx stock trans mounts are worn by now. Unless it's been replaced previously. If your shifter moves around a lot your trans mount is probably worn out. See below for the solution. Drift Freaq Trans Mounts The trans mount has exhaust hanger studs!! It also improves your shifting because your transmission no longer moves around under your shift lever like stock. Because of this you get a the effect of having a short shifter without really having one. The shift lever goes straight into its gates quickly and with less effort. You may experience minor vibrations from the trans mount compared to the feel of a stock trans mount. The trans is responsible for a lot of NVH in our cars hence why Nissan put in the wimpy stock trans mount that let's you shifter wiggle all over. This vibration will diminish as the mounts set in. I also should point out that the nuts that are provided are Nyloc which means you do not need to torque them down hard. A hand wrench is fine for tightening them. Do not use an air ratchet or impact gun. This is the latest design with centered studs (that are not connected) in British Racing Green. Ok Guys this is it we are entering Final days. I am leaving the business. I will be having an End of Business sale with fairly decent discounts. Which you see below this will be a sale til end of stock. There will also be no heat shields sold as they are going out of production $136 shipped for trans mount. $136 shipped for a set of mounts $255 shipped for a set of mounts with trans All sales are final i.e. No returns because you decide you don't want or need them. So please make sure you want/need the item before making your purchase. my paypal is [email protected] __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html Last edited by drift freaq; 02-17-2019 at 03:04 AM..

05-05-2013, 01:57 AM	#4
lalo167 Zilvia Junkie Join Date: Dec 2009 Location: Los Angeles Posts: 583 Trader Rating: (5) Feedback Score: 5 reviews	Just started my car up for the first time with these on and my motor did not shake one bit during idle!! Put a penny on the valve cover and it was super still. Great mounts! __________________

05-09-2013, 11:41 AM	#9
AJZax Leaky Injector Join Date: Feb 2012 Location: WA state Posts: 123 Trader Rating: (3) Feedback Score: 3 reviews	These are on my pro-am car. Actually fairly comfortable Even when paired with xcessive solid trans mount (Z32 conversion). I'm VERY happy and I'll be recommending them to everyone in NW region who's looking for mounts Motor stays very planted, but car doesn't loosen bolts ^_^. It's comfortable. I'm most likely going to buy these for my street/daily s14 car I'll be "building". I'm sure it'd be even smoother with drift freaq trans mount instead of the metal to metal trans mount from xcessive, lol. I recommend these! __________________ www.ajdrift.com Mansfield, A - 145

05-10-2013, 07:46 PM	#12
ATLspeed Zilvia Addict Join Date: Jan 2007 Location: Eden, MD, USA Age: 34 Posts: 921 Trader Rating: (14) Rides Gallery: ATLspeed Feedback Score: 14 reviews	whats the height of these compared to stock or nismo motor mounts. I have a 2jz in mine s13 and my window weld filled mounts have my oil pan sitting level with my subframe. Car is slammed and oil pan would like some more safety besides my skid plate. I'm between your mounts and Xcessive mounts. Thanks __________________ 93 s13 Vert - 2jz/cd009 -- parted/sold 95 Supra Turbo

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-02-2013, 11:28 PM	#3
denian_cellphone Zilvia Junkie Join Date: Feb 2011 Location: SoCal! Posts: 347 Trader Rating: (8) Feedback Score: 8 reviews	best mounts on the market!

05-05-2013, 02:39 PM	#5
[email protected] Zilvia Junkie Join Date: May 2012 Location: California. los angeles Age: 55 Posts: 393 Trader Rating: (4) Feedback Score: 4 reviews	Can locals pick up after the 10th?

05-06-2013, 09:37 PM	#7
AsleepAltima Zilvia Addict Join Date: Aug 2006 Location: Ontario, Ca Age: 48 Posts: 667 Trader Rating: (8) Feedback Score: 8 reviews	i might have to get me the trans mount. tired of feeling my shifter move.

05-09-2013, 01:53 PM	#10
Rich260z Zilvia Addict Join Date: Apr 2011 Location: Burbank, CA Posts: 621 Trader Rating: (8) Feedback Score: 8 reviews	Seriosuly these rock, was using the mounts just on the motor and when started getting parts for a 5 spd swap I knew what tranny mount to get.

05-18-2013, 03:10 PM	#15
ICOMPLAINALOT Leaky Injector Join Date: Sep 2012 Location: Pittsburgh PA Age: 36 Posts: 69 Trader Rating: (0) Feedback Score: 0 reviews	When will these ship out if I order? Posted from Zilvia.net App for Android

05-18-2013, 03:58 PM	#16
ICOMPLAINALOT Leaky Injector Join Date: Sep 2012 Location: Pittsburgh PA Age: 36 Posts: 69 Trader Rating: (0) Feedback Score: 0 reviews	And will they work with my zerolift 1jz s14 swap mounts? The mounts work with the stock engine and Trans mount so I assume it will Posted from Zilvia.net App for Android

05-19-2013, 06:44 AM	#17
Dirtcanhurt089 Zilvia Member Join Date: Jun 2011 Location: plaistow nh Posts: 188 Trader Rating: (1) Feedback Score: 1 reviews	You have my attention lol ill be ordering a set in the next 2 weeks I need mounts baddd Sent from my HTC VLE_U using Tapatalk 2

05-19-2013, 03:02 PM	#19
801nismo104 Zilvia Member Join Date: May 2010 Location: Everywhere Posts: 228 Trader Rating: (7) Feedback Score: 7 reviews	you should have a memorial day sale discount i bet you will sell alot of sets.

05-21-2013, 07:17 PM	#21
TwelveAM Nissanaholic! Join Date: Feb 2010 Location: SoCal Posts: 1,932 Trader Rating: (26) Feedback Score: 26 reviews	I'll be picking up a tranny mount soon. My car hops all over the place. Been reading nothing but good reviews on your mounts.

05-25-2013, 11:47 PM	#22
trainwreck 14 Leaky Injector Join Date: Dec 2011 Location: ca Posts: 79 Trader Rating: (1) Feedback Score: 1 reviews	Why is shipping so expensive on these? I would consider buying if the cost wasn't so disproportional.

05-27-2013, 11:22 PM	#24
ICOMPLAINALOT Leaky Injector Join Date: Sep 2012 Location: Pittsburgh PA Age: 36 Posts: 69 Trader Rating: (0) Feedback Score: 0 reviews	From the reviews I've been reading the 19 bucks is probably totally worth it Posted from Zilvia.net App for Android

05-29-2013, 08:42 PM	#29
ICOMPLAINALOT Leaky Injector Join Date: Sep 2012 Location: Pittsburgh PA Age: 36 Posts: 69 Trader Rating: (0) Feedback Score: 0 reviews	Do I just send you the money and leave my address in the notes then you'll ship out? Posted from Zilvia.net App for Android