OFFER! Toshiba Tablet, UR Pulley, NGK wires, Crank/Rods, Tools

[Pirate_Freder]

Bumps would be greatly appreciated :-D

Everything is OBO. My name is Fred, text 503-550-9410 or PM. For trade I am looking for a wideband, misc suspension, Aluminum Driveshaft S13 non-abs, Apexi Rev Speed Meter, Apexi ELII White w/silver bezel water temp/oil temp/oil pressure gauge, Nismotronic for S13 KA24de, etc etc just let me know whatever you have, doesn't hurt to ask.

Unorthodox crank pulley KA24DE in great shape SOLD THANK YOU!

Freshly machined KA24DE crankshaft with good rods, will require .25 undersized bearings $150

http://i26.photobucket.com/albums/c148/Pirate_Freder/20130326_172129_zps057b7a76.jpg

http://i26.photobucket.com/albums/c148/Pirate_Freder/20130326_172304_zps9622b396.jpg



Toshiba Excite 32GB 10.1" tablet android ICS with case and USB OTG/HDMI adapters. Barely used like new in box- SOLD


I no longer need my NGK spark plug wires. They only have a couple thousand miles on them and are in great condition minus the coil wire. The coil wire just needs a new connector/boot on one end cause my msd connector was on there and I needed it for my new wires, maybe on the other too cause it turned yellow, I believe from resistance heating(bad connection to the distributor cap) but it was working fine when I took them off. If you have an S14 KA with an internal coil than you don't need it.They retail for about $75 or $65 for the s14 ones without the coil wire. I'm just asking $45 shipped.

(not my pic)just an example of how they look installed
http://i26.photobucket.com/albums/c148/Pirate_Freder/2eehm5i.jpg


Actual wire set
http://i26.photobucket.com/albums/c148/Pirate_Freder/def3a23f.jpg

-Fix busted threads such as your timing chain idler pulley bolt(ka24de) with this NAPA Heli-coil kit for M12x1.25 PLUS the necessary drill bit(31/64, good quality from Ace Hardware). All this only used once for $40+shipping.

RIVETER SOLD!

http://i26.photobucket.com/albums/c148/Pirate_Freder/7715db97.jpg

[JDS Performance]

Not sure what your got your crank machined to...but I have a new set of .25 bearings for it - $50

[Pirate_Freder]

Not sure what your got your crank machined to...but I have a new set of .25 bearings for it - $50

Glad you mentioned that, I totally spaced it. It is .25 undersized

[oldenglishloco]

not bad free bump og

[Pirate_Freder]

A little progress made but still plenty of good stuff left. Hit me up with some offers

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

[Pirate_Freder]

Are my prices scary or what? Anywho, final bump.

[imbored205]

lmao in the tablet pic isnt some chicks nips showing?

[Pirate_Freder]

lmao in the tablet pic isnt some chicks nips showing?

Nope, its totally mint. Your probably looking at part of the background or that bit on the left is a reflection.

If u want a different shot of it let me know.

[anti tyler]

Food for thought, don't advertise that the wires you're trying to sell, were burnt... if its yellow its not worth buying. the rubber shielding may look fine but the core can be fried...

[Pirate_Freder]

Food for thought, don't advertise that the wires you're trying to sell, were burnt... if its yellow its not worth buying. the rubber shielding may look fine but the core can be fried...

I certainly appreciate the input. Im just being honest and straight forward. As i said in my listing though its only the coil wire due to poor contact and someone with an s14 doesnt need that wire, all of the others wires are in great shape.

[Pirate_Freder]

UPDATE- Unorthodox crank pulley sold! Thanks! Everything else is still available so shoot me offers.

[SupaDoopa]

Nope, its totally mint. Your probably looking at part of the background or that bit on the left is a reflection.

If u want a different shot of it let me know.

Definitely looks like nips in he reflection. Nice supple nips.

[Pirate_Freder]

Update- tablet traded off for an aluminum driveshaft :-)

[Pirate_Freder]

Definitely looks like nips in he reflection. Nice supple nips.

...thank you? Lol