93 MT 240sx ka won't start

[Jdmtooth]

So it was a normal day . Drove to the stores went it for 5 mins came out and my car won't start( will turn over) . Battery is new start works fine I'm getting fuel and I'm getting spark. I don't know what it can be , no check engine so idk.
Please help.

[yetijeff]

Ur not gettin air fuel or spark. Has to be one of those. How do u kno ur gettin fuel

[Jdmtooth]

Ur not gettin air fuel or spark. Has to be one of those. How do u kno ur gettin fuel

I took of the fuel line and fuel is getting to the engine , I also Tryed using starter fuild

[yetijeff]

Are ur injectors firing? Ya ur getting fuel to the rail but whatabout past the injectors? Also how are u testing for spark?

*edit
Also a list of modifications etc could help too

[Jdmtooth]

No mods, a stock ka24de

I check all spark plugs by taking them out grounding them and turning over the engine and they all spark a nice blue spark, as for the injectors I don't know but I use the starter fuild it should have turned on for a couple of secouds

[yetijeff]

So it's not even tryin to start? Also are u just spraying thru the tb? Try having someone hold the gas at wot and spray thru a vac port closer to the intake ports. Its possible the starting fluid isn't gettin to the intake ports. If it works its something to due with the injectors (ecu, wiring, etc)

[Jdmtooth]

I did that I sprayed it in the vac line and in the tb and nothing ,

[yetijeff]

Dam. Has to be something to do with spark... Distributor came loose? Something with timing...

[yetijeff]

And maybe run a comp. test just to see.

[Jdmtooth]

How do I check the timing , and comp. is good

[TwelveAM]

could be a loose wire somewhere.

wiggle around the injector connectors. That happen to my S13 also. 2 mins inside Autozone, and once I came out it wouldn't start. I started tightening all the wires distributor, spark plug wires, and pushing down the injector connectors made it start right up.

Just a thought.

[Jdmtooth]

Ill give it a shot