View Full Version : gold in oil pan :(
snofufu
02-27-2013, 04:57 PM
so i was replacing my oil pan and i find these 4 little balls in there where could they of come from oil pump?
http://i293.photobucket.com/albums/mm47/Domaxis/WP_000761_zps6649c3e3.jpg
http://i293.photobucket.com/albums/mm47/Domaxis/WP_000762_zpsb713ddcf.jpg
Bambi
02-27-2013, 05:22 PM
They look like ball bearing, balls.
snofufu
02-27-2013, 08:37 PM
Yeah that's what it looks like but from where? Oil pump or turbo? They are pretty small
Sileighty_85
02-28-2013, 12:53 AM
more than likely Turbo bearings
Croustibat
02-28-2013, 02:02 AM
I am surprised the turbo has not shattered if these are from the turbo ...
Sileighty_85
02-28-2013, 04:44 AM
Previous owner could have blown it then slapped in a new turbo
onehundredoctane
02-28-2013, 07:18 AM
Since they are still in one piece and not shattered they have to be turbo bearings. My guess at least.
ForeignMuscle
02-28-2013, 07:28 AM
Turbo bearings. Been through this several times. It will spit a lot of them out before it completely shits the bed.
There are no other ball bearings in an sr20 btw. The waterpump shaft contains a set but they could never get inside the engine.
Croustibat
02-28-2013, 10:04 AM
the oem turbo does not have roller bearings either, except some rare late jdm S14/a ...
snofufu
02-28-2013, 02:20 PM
Is there a chance my internals could be messed up? I haven't started the engine or anything I didnt really find metal but those little balls in my oil pan
snofufu
02-28-2013, 02:21 PM
The engine is from a s14 kouki
Mikester
02-28-2013, 02:26 PM
That's really weird... They have probably been in there a long time... Could have been from back in the day when it was still in Japan, or from the previous owner, or from the guy before that... and that... turn it a little bit with a socket... If you don't hear anything rolling around in there, or metal to metal etc, it will prolly be fine.
Journal bearing turbines FTW!!!!!!!!!!
JonathanPrem
02-28-2013, 03:01 PM
Clean out or replace the oil pick up if you already have the pan off.
spooled240
02-28-2013, 03:34 PM
the pick up has a screen so even if it managed to get sucked up the pick up it wouldn't get in the engine
on a sidenote, I'm pretty sure some kouki s14's came with ball bearing turbo's so that could be the source
ForeignMuscle
02-28-2013, 04:41 PM
Your engine is probably fine man. Just check out the turbo. It's got to be a s14 bb or an s15 bb turbo. I would replace it regardless of what condition it looks to be in.
Replace the turbo.
Change your oil and filter.
Buy a magnetic drain plug. (I got one I think if you want it.)
Drive a couple hundred miles and change the oil and filter again.
It sucks, but a $40 oil change is a lot cheaper than a rotating assembly.
snofufu
02-28-2013, 06:53 PM
Thx a lot for your guys input I really appreciate it!! Engine will be going in this Sunday!
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.