View Full Version : Boost issue
yirosuma
02-04-2013, 08:48 PM
Ok guys I'm having a problem. I have a 89 nissan 240sx with a stock series 2 rb25det. All stocks parts. Now here is the problem I have 0 bar during the car running idle, and under a load Im not getting any boost and the car has no power. Any suggestions? :2f2f:
nnoriega
02-12-2013, 03:44 PM
mayor boost leaks or blown turbo, maybe open stuck wastegate, blown ic pipe, it could be a lot of things man, what have you checked?
Does the turbo even spins?
steve shadows
02-13-2013, 05:09 PM
Maybe the wastegate arm just popped up haha - good chance of this.
cotbu
02-15-2013, 09:11 PM
Maybe the wastegate arm just popped up haha - good chance of this.
Yeah!, but what would that say about the TS?
Give the car a twice over and also check the boost gauge's vacuum/boost connections, ECU codes, Then check timing.
trxrx7
02-15-2013, 09:40 PM
probably stuck open wastegate, i'd check that and all the intercoolerpiping and hoses
Croustibat
02-16-2013, 11:37 AM
You should have around MINUS 0.7bar at idle, meaning your gauge is either unplugged or not working
Edwin562
02-16-2013, 12:05 PM
- make sure wastegate is properly hooked up
- Boost leak test
AdamR
02-16-2013, 04:56 PM
You should have around MINUS 0.7bar at idle, meaning your gauge is either unplugged or not working
Everybody else missed that, I guess.
ultimateirving
02-17-2013, 12:58 AM
- make sure wastegate is properly hooked up
- Boost leak test
- make sure wastegate is properly hooked up
- Boost leak test
- make sure wastegate is properly hooked up
- Boost leak test
- make sure wastegate is properly hooked up
- Boost leak test
This. Verify flapper swings freely and arm is connected. Then report back.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.