S13: S&W 10pt Roll Cage & Megan Rear Strut TowerBrace...

[gills]

Hey guys,

ROLL CAGE SOLD!

STRUT BAR SOLD!

[fly824]

Pm price picked up

[gills]

I forgot to mention and post pics of the spreader/mounting plates that come with kit. There's 8 1/8" thick, 6"x6" mounting plates that come with it.

PMing you...

[Ekaptn]

i have a question even thought enjuku says "1989-1994 Nissan 240SX, through dash, 1-5/8 x .134" wall EWS tubing,(More for shows, most likely will not pass any sort of motorsports tech.)

11-5594TD-CM
89-95 Nissan 240SX thru Dash, 1-5/8 x .083" wall moly tubing, (More for shows, most likely will not pass any sort of motorsports tech.) "

you think after welding in it would pass inspection for like A class shit.???

[WhipsGoneWild.net]

Im not going to lie i saw s&w i thought smith and wesson l,mao lol

[gills]

i have a question even thought enjuku says "1989-1994 Nissan 240SX, through dash, 1-5/8 x .134" wall EWS tubing,(More for shows, most likely will not pass any sort of motorsports tech.)

11-5594TD-CM
89-95 Nissan 240SX thru Dash, 1-5/8 x .083" wall moly tubing, (More for shows, most likely will not pass any sort of motorsports tech.) "

you think after welding in it would pass inspection for like A class shit.???

Typically, most, if not all sanctioning motorsports organizations require a minimum of 1.75"OD tubing to be used for the main structure (main hoop, halo, A-pillar members, door bars, rear members, etc.) of a roll cage. Then the tubing wall thickness is determined by the race weight of the car. Usually racecars that are 3000+ lbs require 0.120"+ and sub 3000 lbs can get away with 0.90". Then there's always the debate of ERW (Electric Resistance Welded) tubing and DOM (Drawn Over Mandrel). So it's a little more complicated than just being "weld-in" or "bolt-in." If you are interested in competing in any sort of sanctioned competition it'll be very wise to review the safety regulations!

So with that said, yes, don't expect to install ths and run a SCCA/NASA race. It does have a nice thick wall though and will fit with an interior still intact, which is cool for a weld-in cage. Also, it's very inexpensive for a cage!

[gills]

lil bump^^

I also want to add that just because this cage wouldn't pass professional sanctioned motorsports tech inspections doesn't mean you wouldn't be safer if you had this in your car versus not having anything at all (obviously installed and welded professionally) if you just attend regular track days (HPDE's) or other non-competitive high performance events. This cage plus a 5 or 6 point harness would definitely be safer than nothing and your everyday 3 point seat belt.

bump^^^

[gills]

bump to the top^^

If anyone has any questions about this, don't hesitate to ask.

[MiamiZ33]

Hey, I would recommend getting a freight quote yourself. I just had a complete engine/tranny shipped to me from NJ for less than $400. They go by weight, working it out backwards I paid about $0.70/lb. If you can get a legit shipping quote, I'm interested.

Besides, Enjuku does not stock these roll bars, they drop ship directly from S&W so the shipping quote was not accurate in your case since they are in PA.

[gills]

Hey, I would recommend getting a freight quote yourself. I just had a complete engine/tranny shipped to me from NJ for less than $400. They go by weight, working it out backwards I paid about $0.70/lb. If you can get a legit shipping quote, I'm interested.

Besides, Enjuku does not stock these roll bars, they drop ship directly from S&W so the shipping quote was not accurate in your case since they are in PA.

Hey thanks for the interest. S&W has a flat shipping cost of $109 on their website: Imports, 1989-1994 Nissan 240SX 10 Point Roll Cage Race Car Dragster Chassis, Roll bars, Cages, Suspensions, Parts (http://www.swracecars.com/store/1989-1994-Nissan-240SX-10-Point-Roll-Cage-OSCARItem_38=11-5594.aspx) which is obviously much better than the $195 Enjuku quotes. So I think my estimated price of $375 shipped to anywhere on the east cost (which Miami is) is more than fair.

So do you want to PM me your address? I'll be more than happy to get you an accurate quote if you truly are serious.

Let me know.

[gills]

MiamiZ33, sent you a PM with an actual shipping charge.

Some more info:
This cage can actually be used in some sanctioned events. 24 hours of Lemons (24 Hours of Lemons - Home Page (http://www.24hoursoflemons.com)) and ChumpCar (ChumpCar World Series | home (http://www.chumpcar.com)) requirements for sub 3000lbs cars is 1.5" OD x 0.120" wall OR 1.75" OD x 0.95" wall tubing so the 1.625" OD x 0.134" wall dimensions of this S&W cage would pass tech.

As for the rear strut bar, make me some offers!

[gills]

bump^^^

I added an illustration showing the arrangement of this cage that will help visualize how it goes together. Any questions, please don't hesitate to ask.

-Tom

[MiamiZ33]

I wish I could pick this cage up, need to get my car running first!!!:2f2f:

Bump for a cool dude, GLWS. :bigok:

[gills]

I wish I could pick this cage up, need to get my car running first!!!:2f2f:

Bump for a cool dude, GLWS. :bigok:

Thanks dude!

[gills]

bump for a good deal!

[gills]

to the top^^

[gills]

great cage for cheap!!!

[gills]

Anyone wanna buy a cage? ;)

[WhipsGoneWild.net]

Yeah w/o the fortune of shipping lol

[shaggy sr]

Bumps for Thomas
He's an legit seller

[gills]

[/U]hipsGoneWild.net;5097867]Yeah w/o the fortune of shipping lol

Ha! You're in PA dude. Make me an offer you might be surprised ;)

[gills]

S&W charges $109 shipping flat shipping. I think it's still a good deal if you are somewhat near NY.

[gills]

bump! Updated info and pricing!!

Any interest, PM me.

[gills]

bump...make an offer!

[k20s13collins]

I'm in. I'm in philly so I'll definitely come up and pick it up. Can I send you a portion of money on paypal or something to reserve it? LMK

[k20s13collins]

So Can this cage be used at grass roots drifting events or no?

[gills]

PM'ed you.

[s2k05]

Dang I want!! Lemme know if its still up f/s

[gills]

^^^ PM sent...

[gills]

Cage still up for grabs. Didn't hear anything back from k20s13Collins

[gills]

added pics of the spreader plates that come with the cage! ^^^^

[gills]

This cage belongs in someone's S13, not my garage!

[gills]

Roll cage sold!

$30 shipped to anywhere in the country for the megan strut tower bar!

[fly824]

Cage sold to me

[gills]

Cage sold to me

nice meeting you man! good luck with everything. Will leave positive feedback.

[gills]

Any interest in the Megan strut bar?

[gills]

someone buy this strut bar! help out my lemons race team...