View Full Version : Swedish Nissan 200sx S13 "Type-X" streetdrifter
CP-Productions
12-25-2012, 06:23 AM
Hi guys!
So I thought it maybe was time to go global with my S13 build! haha
I want to start off this story by ending an old one, my Impreza STi build.
http://www1.garaget.org/archive/12/11209/279331/279331-2875995.jpg
http://www1.garaget.org/archive/12/11209/279331/279331-2926047.jpg
http://www1.garaget.org/archive/12/11209/279331/279331-2926053.jpg
http://www1.garaget.org/archive/12/11209/279331/279331-2926049.jpg
I'm really proud of how good that car turned out in the end! And see it
published on pages like StanceNation (5 times too lol) was a dream come true!
But after an awesome summer with that it was time to move on to bigger dreams!
An S13 has always been a dreamcar, people call my crazy but I dont give a shit lol.
So I sold the STi to an friend who will threat it right and bought myself a 1989 Nissan
200sx S13, pretty stock and with a boring CA18det in it.
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4758red.jpg
Took it for a spin around the block and then it was straight into the garage!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4755red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4760red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4763red.jpg
That's what we managed the first night, then it was time to hit the drawing
board and start making some plans! And well, here is the specs:
Engine and drivetrain:
Engine and gearbox from and -95 S14, SR20det that is.
Stress Borred Block
ACL Calico Rod Barings
ACL Calico Main Bearings
ARP Head Studs
CP PISTON 86,5MM “Oversize”
Eagel Rods
Brian Crower intake Camchaft steg2, "264"
Brian Crower exhaust Camshaft steg2, "264"
Brian Crower harder valve springs
Greddy Rocker arm stoppers
1,5mm Cometic Headgasket
Garrett GT2871R-15 with internal wastegate (will be changed)
Hard Race engine mounts
HKS OIL Catch Tank
Front mount intercooler
Driftworks radiator with 12" electric fan
Apexi open air filter
Z32 Turbo airflowmeter
Greddy Oilcooler
Greddy Type-R BOV
SARD 850CC Injectors
Apexi power fc + datalogit
etc etc etc..
With this setup it maxed out the turbo at 410whp @ 1,35bar on E85.
Turbo will be changed and the plans is like 500hp to the wheels! :eek3d:
Chassie and brakes:
Driftworks CS2 (HSD) coilovers
Driftworks Geomaster 2 knuckles with rack spacers
Driftworks camber, toe, caster and traction rods all around
Driftworks front and rear adjustable lower arms
Tein Strengthened Nissan Tie Rods & Ends
Driftworks steering rack boot kit
Driftworks solid subframe bushes
Driftworks rear upright and control arm poly bushes
Driftworks rear lower arm poly bushes
Driftworks poly gearbox mount
Driftworks stainless steering bush
Oilcooler to the power steering
New 5x114,3 hubs all around
Skyline and 300ZX brakes all around
Interior:
Bride Zeta III FRP for me
FK seat or something for the passenger
Nardi 350mm leather wheel with DW snap-off
Bride fabric on some parts
Multipoint cage from CustomCagesUK
etc etc..
Rims and tires:
Volk TE37 18x9,5" et12 all around with 205/35-18 (I think)
Those will be for the street, looking for some XXR's for the track
Body:
Magic Aero Club Series 1.0 bodykitt. This shit is awesome, an improved
Type-X kit I would say that comes with all the stock monts etc etc. EPIC!
Kouki taillights of course with an black centerpiece
Looking for some ganador mirrors, or else I'll roll with stock
Custom front tubs
Paint will be some dark grey, not 100% sure yet..
The build has been on for 2months now.. time to get you guys up to date! /Totte :hyper:
CP-Productions
12-26-2012, 03:19 AM
First up I bought that awesome SR20 setup of a friend!
http://www1.garaget.org/archive/104/103026/193396/193396-2591011.jpg
Then I found these:
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4732red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4751red.jpg
And the teardown continued..
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4768red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4774red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4776red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4795red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4824red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4827red.jpg
/Totte
CP-Productions
12-26-2012, 03:25 AM
Then it was time to start making the garage a bit more cozy!
And while my friends were over and we had been drinking, the car got some love to!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4878red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4881red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4835red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4841red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4855red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4889red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4900red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4907red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4910red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4925red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4955red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4960red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_4967red.jpg
/Totte :yum:
CP-Productions
12-26-2012, 03:29 AM
Dropped a sweet Driftworks order and they delivered! More parts coming..
Driftworks CS2 coilovers by HSD! "The Gentleman's Choice!"
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5004red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5010red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5012red.jpg
Plenty of boxes..
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5020red.jpg
Rear toe rods!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5022red.jpg
Tension Stabilizer Rods!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5027red.jpg
Rear Camber Arms!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5030red.jpg
Rear Traction Rods!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5036red.jpg
Geomaster Tension Rods!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5040red.jpg
Front Lower Arms!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5044red.jpg
Rear Lower Arms!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5083red.jpg
Some sweet bushes!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5060red.jpg
Geomaster 2 knuckles!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5070red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5075red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5077red.jpg
Some other goodies..
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5066red.jpg
New hubs!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5089red.jpg
More candy..
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5090red.jpg
Some more..
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5094red.jpg
Brakes!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5100red.jpg
Also dropped an order on this!
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-snc7/580449_388324064522142_56692524_n.jpg
And well more to come! /Totte :squintd:
CP-Productions
12-26-2012, 03:35 AM
And then the bodywork continued..
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5110red.jpg
Decided that I should build tubs to, something like this!
http://i1256.photobucket.com/albums/ii494/Koncept_paint/IMAG0445.jpg
http://i1256.photobucket.com/albums/ii494/Koncept_paint/IMAG0447.jpg
So I started cutting..
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5104red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5106red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5186red_zps8626adce.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5191red_zps0787069f.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5213red_zps65df6238.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5230red_zpsda61fb15.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5222red_zps2fbe7ced.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5229red_zps73940b34.jpg
Rusty floor, need some attention!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5231red_zpse9ff06bc.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5235red_zpsb250f7fe.jpg
And well thats where we are today! Now I'm off to the garage to do some
electrics so I cant start welding in some fresh metal and do the tubs! :hsdance:
/Totte
Motary
12-26-2012, 04:13 AM
Great build so far, some neat parts there! Where did you find TE37s if I may ask, from the UK?
CP-Productions
12-26-2012, 04:18 AM
Great build so far, some neat parts there! Where did you find TE37s if I may ask, from the UK?
Thank you! A friend got them from Japan! :cj:
/Totte
nujabe
12-27-2012, 01:23 AM
Looking good dude !!! I like all the driftworks stuff. i want the knuckles just because they look cool lol.
Mustache240
12-27-2012, 01:28 AM
nice build keep it up!
drscooper
12-27-2012, 07:17 AM
wow kick ass build man! and awsome parts!!
EnvyS13
12-27-2012, 07:58 PM
pretty sweet build
CP-Productions
01-01-2013, 01:00 PM
Been a couple of busy days in the garage now.. but the tubs are coming along nicely!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5255red_zps4c031cb8.jpg
Hopefully I will have them fully welded by tomorrow so I can get started on fixing all
the rust so I can leave the car to Fastcar Tuning & Performance to get the cage fitted!
Hopefully the car will get painted next month /Totte :blah:
Twinkies!
01-01-2013, 05:00 PM
subscribed, looks promising, and alot that driftwork suspension <3
cchondro
01-01-2013, 05:37 PM
Damn this build is delivering
keep it up man.
LaMaR-
01-02-2013, 11:35 AM
Tubs look awesome, can you by chance take a photo of the inner fender well now I just wanna see what that looks like.
Thanks
Jon
CP-Productions
01-03-2013, 04:35 PM
The metal fabrication is slowly getting there..
But today I took a break from that to sand blast some stuff
to the engine and try out the wrinkle paint I bought. Cool shit!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5304red_zps2988ae55.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5310red_zps6af2aa1d.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5325red_zps1776c4a1.jpg
But the next few days will be fabrication days, more pics coming! :Ownedd:
/Totte
Krusty_s13
01-03-2013, 04:53 PM
awesome build. btw how much did that type x style aero run?
OBEEWON
01-04-2013, 08:48 AM
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5325red_zps1776c4a1.jpg
/Totte
Hahaha booty cheeks in the background. lol. Next time post some breasticles or something less gay. Paint looks dope.
CP-Productions
01-05-2013, 02:02 PM
Hahaha!! Well, picked up my seat today!
http://www.alive.se/upload/source/2454303.jpg
/Totte
CP-Productions
01-06-2013, 02:21 PM
Fabrication continues.. taking alot more time then I planed..
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5327red_zps9845ff9d.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5330red_zpseb4fabd0.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5340red_zps8c7132d8.jpg
/Totte :rolleyes:
Josh's95TT
01-09-2013, 08:52 PM
Not really a fan of STI's but you're STI made me love them! that was an beautiful impreza. Thumbs up :D
CP-Productions
02-04-2013, 03:35 PM
Big update is coming.. someday! :hsdance:
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/579728_438744409527668_276031821_n.jpg
/Totte :yum:
PeaceOnesxWai
02-04-2013, 04:10 PM
is that 180sx kit all FRP?
Idahos13
02-08-2013, 08:32 PM
Sweet build so far! I love Type X aero. Any updates?
ShadowMan
02-08-2013, 09:29 PM
Damn! All the way apart. I should be glad I didn't have these rust problems. Looks like you got it handled though. Keep it up.
forgotten
02-09-2013, 08:16 AM
This built is grate! love your work so far keep it up :)
damn those driftworks suspensiion shit is soooo dope
Kwolfe
02-09-2013, 08:08 PM
Sweet build! Can't wait for more updates!
CP-Productions
02-10-2013, 05:35 AM
Thanks guys! Dropping a bether update with more pics when I get the time :yum:
is that 180sx kit all FRP?
Well you can chose what you want when ordering a Magic Aero bodykit.
I went with Magic-Original: Entry level impact resistance FRP, comprising fibreglass chopped strand,
Diolen polyester cloth and my own resin blend offering improved elongation break,tenacity and impact
resistance. Over standard fibreglass this construction produces a superior part.
Then you have 2 other ways but I went with the cheap one because.. well I think
that I'll brake a kit or two while drifting so didnt want to spend so much money on it! :hsdance:
Whats nice with this kit, the Magic Aero Club series V 1.0 is this:
*extended skirts 15mm over stock and made in one piece
*De number plated front bumper
*Lip extended 10mm over stock
*Spoiler extended 20cm over stock
*The rear lip was designed from scratch
So this actually looks waaaay bether then a Nissan OEM Type-X aero! :cj:
Best regards // Christoffer
CP-Productions
02-10-2013, 02:04 PM
Hello again!
Dropping a big update about what has happend the last couple of weeks!
But I'm to tired to translate all the text right now.. so you will just get alot
of pictures to drool on! Haha maby dropping in some text another day..
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5359red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5362red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5366red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5370red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5410red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5411red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5424red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5474red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5476red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5481red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5485red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5488red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5489red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5434red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5444red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5456red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5459red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5505red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5517red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5518red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5521red.jpg
Best Regards Christoffer :yum:
Team Runner Video
02-10-2013, 02:28 PM
Thanks guys! Dropping a bether update with more pics when I get the time :yum:
Well you can chose what you want when ordering a Magic Aero bodykit.
I went with Magic-Original: Entry level impact resistance FRP, comprising fibreglass chopped strand,
Diolen polyester cloth and my own resin blend offering improved elongation break,tenacity and impact
resistance. Over standard fibreglass this construction produces a superior part.
Then you have 2 other ways but I went with the cheap one because.. well I think
that I'll brake a kit or two while drifting so didnt want to spend so much money on it! :hsdance:
Whats nice with this kit, the Magic Aero Club series V 1.0 is this:
*extended skirts 15mm over stock and made in one piece
*De number plated front bumper
*Lip extended 10mm over stock
*Spoiler extended 20cm over stock
*The rear lip was designed from scratch
So this actually looks waaaay bether then a Nissan OEM Type-X aero! :cj:
Best regards // Christoffer
It's a knockoff :fawkd:
CP-Productions
02-11-2013, 03:28 PM
Spent some more time on the subframe today! :yum:
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5522red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5524red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5532red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5530red.jpg
// Christoffer
kevinzhou
05-05-2013, 02:45 AM
any more pics of
the cabin fab work???
nice going dude, i make bodykits and parts in fiberglass and carbon myself, and checking that company that you bought the bodykit, they seem to be doing quality work. i'm gonna order the kit from them as well ...i ve made even carbon kevlar bumpers for my cars in the past, but whatever material, whatever strength, if you re gonna crash, nothing survives...so its better now to blow a lot of money on a kit... i'm gonna copy mine as soon as i get it, so i'll be able to produce more if something happens... how much did you pay for the whole kit?
sharpe_corners
05-05-2013, 03:41 AM
Our builds are quite alike! Question though, why did you choose to toss the CA18? Europe and Aus/NZ guys seem to do something with it(CA), while us 'mericans seem to stray away as you have.
the ca18 is nowhere near as good as the sr is....the sr is just engineered better, in all aspects. not to say that the ca cannot make power, there are a few here running 700hp...in nissan cherrys and micra's
CP-Productions
05-05-2013, 01:38 PM
Update maby?
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5937red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5958red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5993red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5985red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5996red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6158red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6046red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6058red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6084red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6502red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6504red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6505red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6508red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6397red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6416red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6423red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6426red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6438red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6444red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6483red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6498red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6501red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6451red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6454red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6457red.jpg
Car should hit the ground someday next week! :naughtyd:
Well actually I like the CA18det since a good friend of mine Mobne has
the world strongest at over 700whp in his S13 and we are running in the
same team this year. Only reason I went with the SR20det is that I got it
for a good price and everything is allready done to it and works good! :rolleyes:
Best regards Christoffer
CHiNo4ReaL
05-05-2013, 01:43 PM
Great project~!
1jzjoey
05-05-2013, 01:55 PM
nice build, so far, damn i wish i had money like this.
FaLKoN240
05-05-2013, 02:18 PM
Looks good. I love builds that don't disappoint and seem to have endless money. (I ain't mad at ya!)
ahenry778
05-05-2013, 05:35 PM
Great build!
Teigen
05-06-2013, 01:29 AM
Looking good
TE37 is so nice rims, very good.
I Bought a lightened version from Endless that is 450 grams lighter per rim, for caring use. They are expensive but very lovely, also they fit with Endless 380mm brake setup.
Well actually I like the CA18det since a good friend of mine Mobne has
the world strongest at over 700whp in his S13 and we are running in the
same team this year
My friend is almost done with his 950whp s13 CA :naughty:
CP-Productions
07-20-2013, 12:21 PM
Well... this thread needs an update!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_7903red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_7826red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_7951red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_7975red.jpg
Should be painted in about 2-3 weeks then the final assembly starts /Totte :)
slideslidegnarslide
07-20-2013, 01:13 PM
Beautiful build. But please take the mustache sticker off the back.
cured13
07-20-2013, 01:30 PM
Looking good,
is that just a pull or you had to weld
and what the offset/camber specs
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6501red.jpg
xoxide
07-20-2013, 02:10 PM
Offset/camber specs: Jackstand spec. :wan:
This thread is full of win.
oscarsx
07-20-2013, 03:04 PM
Best thread I've seen in a while
- oz
jdizzy204
07-20-2013, 09:36 PM
Beautiful build. But please take the mustache sticker off the back.
^^This please^^
Paint it and drive it.
Please stay away from:
1) Sticker-bombing
2) Vinyl wraps
3) Plasti Dip
sleepyS14se
07-22-2013, 09:40 AM
^ agreed! amen
build looks excellent so far!
JohnnyD
07-30-2013, 01:53 AM
Beautiful... I wish I had at least half of your fab skills. Great work.
Ramonesfreak2010
07-30-2013, 07:02 AM
I miss my hatch!
Big Zee
07-30-2013, 03:34 PM
I can see this being a build that does not dissapoint!!!
CP-Productions
08-04-2013, 04:13 AM
Thanks for the love guys, awesome to hear!
And about the kouki panel, it's silver so that's just temporarily.
Going to paint it black with a few other details when it's time to paint.
Dropping in a few others photos that I think you guys havent seen yet!
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_7689red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_7704red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_7715red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_7720red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_7723red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_7756red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_7959red.jpg
And right now it's all about the bodywork! Re-did the whole right
rearfender because it didnt came out as good as the left side. :doh:
Besides that the half right side had been crashed sometime before
and they just put tons of bondo/filler (or what you call it lol) over
everything so I had to grind it all of and straighten out all the metal! :nono:
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_7991red.jpg
But yeah.. I've had this car for about 10 months now and I dont want to
rush it this last part! But hopefully the car will be painted and up and running
in about 2 months from now! It all depends on time and money!! :o
Best regards // Christoffer
da_crew10
08-07-2013, 09:47 AM
What sub frame bushings did you use?
kingston240
08-07-2013, 10:30 AM
Nice build!
Pinggg
08-07-2013, 10:55 AM
what hood vent??
CP-Productions
12-25-2013, 01:44 PM
What sub frame bushings did you use?
Driftworks! :boink:
Nice build!
Thanks man! :D
what hood vent??
Ebay, cheap stuff! :eek3d:
------------------------------------------------------------------
All right.. ehm!
Well it's safe to say that not much has happened since the last update.
No excuse really, just ran out of money to get the car ready for the end
of the 2013 season so I parked the car, took a break, and now I'm back!
Decided NOT to paint the car.. want to finish up all the fabrication work
like new exhaust manifold, IC-piping, exhaust, brackets for the IC and all
the other coolers and well alot of other things that need brackets and fittings!
But then I need the cash to buy the stuff before I make them fit.. :Owned:
At least the SR20 drivetrain is in for the first time to get shit started again!
http://oijoij-hd.com/images/2013/12/07/IMG8711red.jpg
http://oijoij-hd.com/images/2013/12/07/IMG8713red.jpg
http://oijoij-hd.com/images/2013/12/07/IMG8720red.jpg
http://oijoij-hd.com/images/2013/12/07/IMG8725red.jpg
Will try to keep you guys up to date from now on! //Totte
PoorMans180SX
12-25-2013, 01:53 PM
As always awesome work. Curious as to why you went with the non-ported cover for the turbo though? Ported shrouds make more power...
CP-Productions
12-25-2013, 01:58 PM
As always awesome work. Curious as to why you went with the non-ported cover for the turbo though? Ported shrouds make more power...
Thanks man! Bought this turbo "used" but brand new for half the price of a new one!
Know it might not be "the best" but im not looking for high hp either so I'll be fine :wavey:
//Totte
CP-Productions
12-25-2013, 02:06 PM
Looking good,
is that just a pull or you had to weld
and what the offset/camber specs
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_6501red.jpg
It's a bit more work done to it then just a pull..
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5689red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5719red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5725red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5726red.jpg
http://i620.photobucket.com/albums/tt283/CP-Productions/IMG_5773red.jpg
//Totte :D
juvi22003
12-26-2013, 03:43 PM
Just pure win, i picked up mine to be a daily and i already got the itch looking at this thread lol
xBtony
12-26-2013, 10:04 PM
Seriously awesome thread! Love how you did the quarter panels! I've been wanting to do something like that since I got mine a few years ago, I'm just lazy and overs are easier hahah. Regardless, quality build!
CrimsonRockett
12-27-2013, 07:24 AM
Looks good. I love builds that don't disappoint and seem to have endless money. (I ain't mad at ya!)
Right?
It's crazy how fast time flies. Completely missed this thread (just goes to show how little time I spent on Zilvia this year).
I love what you guys did with the core support. Had something like that in mind myself to make life easier when dropping in motors. Do you have any flexing (on the core support) or misaligned panels because of it?
Definitely looking forward to the finished result.
Matej
12-27-2013, 01:31 PM
I love what you guys did with the core support. Had something like that in mind myself to make life easier when dropping in motors. Do you have any flexing (on the core support) or misaligned panels because of it?
The upper part of the core support does not structurally do anything for the unibody. Its only purpose is to support the radiator and hood latch/headlight brackets.
Straitup D
12-30-2013, 09:51 PM
Good Stuff!
mike10562004
01-03-2014, 08:06 PM
good stuff
Derek_McDermott
01-04-2014, 03:24 PM
Build is looking beautiful.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.