CAS Trigger Wheel Settings

[Matman03]

I am about to pull my hair out. I have searched Google for an hour for the stock CAS Trigger Wheel settings. What angle should it be at and how to set it or line it up. If I am just overlooking it please provide the link. I appreciate your help in advance. It is the stock sr20det CAS with the 360 tooth wheel. Also Running Stock ECU with SAFCII THANKS

[codyace]

I didn't know myself, decided to google a little:

CAS Trigger Wheel Fix for AEM EMS Released - Nissan RB Forum - HybridZ (http://forums.hybridz.org/index.php/topic/56681-cas-trigger-wheel-fix-for-aem-ems-released/)

Found that thread there, with some other information in regard to trigger wheel and resolution.

Hope it helps!

[Kingtal0n]

theres an updated trigger wheel for fixing an issue with timing on the AEM for sr20's you might want to look into

[Matman03]

I have seen this aftermarket wheel that is being sold, do you just install it and then adjust your timing from there or do you have to use a different ecu or electronic tuning? I was basically looking for a starting point on the stock 360 tooth wheel since it got turned. There arent really any marks on it that say where you should adjust it to get stock timing. I have heard 45 degree all the way to 60 and 75 degree. Any thoughts?

[Kingtal0n]

this should help

http://forum.aempower.com/forum/index.php/topic,20345.0.html

Nissan CAS Calibration Fix (http://forum.aempower.com/forum/index.php/topic,16577.0.html)