my attempt to make a decent onevia

[Lil_D]

so i picked up this coupe on my birthday its a 1989 240sx coupe with a cam'd ka24e on eibach lowering springs and 17x9 rota grids

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/c0ce1e42.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/53c85de4.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/IMG_0685.jpg

got it home and installed some stance coils i had from my last car and brand new pbm rucas

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/IMG_0697.jpg

swapped to a chuki front end that i had on my other shell then my buddy wanted to take pictures of my car

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/318820_259454584076514_100000359220236_874985_6117 402_n.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/308513_259454574076515_100000359220236_874984_7471 148_n.jpg

the motor just randomly stopped working while i was driving it so i pulled the ka and picked up an sr

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/f894e743.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/209ce594.jpg

started pulling the motor apart because i bought it with a spun bearing

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/63d59158.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/21dea276.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/9ea5542a.jpg

so i bought a new crank and new rods and sent them out to the machine shop to make sure everything was in spec and started putting the motor back together

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/0a980f4a.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/0c4315c4.jpg

ordered pbm hydro and subframe collars

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/9f7f89f3.jpg

picked up version select VI kit and silvia rear valances locally

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/66a29121.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/437fa0e1.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/8fb2d2f5.jpg

got 50mm rear overs and picked up a 326 wing

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/ecf5f6c6.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/74788f1d.jpg

woke up to this big box from the ups man and it had wheels in it

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/676bf4a1.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/93c9ae53.jpg

got some more pbm goodies

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/62e096b4.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/55d0c442.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/80609014.jpg

dropped the motor in and got everything mocked up

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/3ea83c2d.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/63cc9fed.jpg

put the car on the ground for the first time in months

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/21d46118.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/aad916b1.jpg

took the car to my buddies shop and had him weld my fenders and my hydro

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/9ca448dc.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/569f0f61.jpg

got the car home and its just been siting on the trailer trying to figure out why the car wouldnt start

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/5f9fcf7e.jpg

then the front fenders came in after 3 months of waiting. so i test fitted the rear fenders and the fronts

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/991c7393.jpg

http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/c5d2c93c.jpg

Here's a pic my friend took of my rear suspension
http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/ea9ecdee.jpg

a random ass shot
http://i784.photobucket.com/albums/yy123/Lild415/s13%20coupe%20build/ecc93f0c.jpg

finally picked up my ecu. tried plugging it in and it still isnt getting power i think there is something wrong with my fusebox wiring idk i need to find out soon

http://distilleryimage4.s3.amazonaws.com/7a61ce64d6c311e19b6b22000a1e8bba_7.jpg

well just got some brand new ikeya forumula outer tie rods :)

http://distilleryimage7.s3.amazonaws.com/faaad70ed6d311e1bed91231380ffeeb_7.jpg

also my Powered By Max Front Lower Control arm tension rod combo came in

http://distilleryimage2.s3.amazonaws.com/72f74f10da7311e1afd122000a1e8836_7.jpg

http://distilleryimage3.s3.amazonaws.com/2688a538f45a11e1a9d822000a1e9de9_7.jpg

http://distilleryimage3.s3.amazonaws.com/f13e79aaf46011e1a953123138104e29_7.jpg

tried getting the car off the trailer myself and it got stuck -__-

http://25.media.tumblr.com/tumblr_m9r6yvaea61qfebj3o1_1280.jpg

finally got the car in the garage going to start taking it apart soon to figure out if the reason i have low compression is just headgasket or not

http://sphotos-a.xx.fbcdn.net/hphotos-snc7/423926_422510751130115_268118712_n.jpg

well i snapped a cam shaft -___-

http://24.media.tumblr.com/tumblr_m9wnd6p0r51qfebj3o1_500.jpg

well i installed my pbm flca tension rod combo and pbm inner tie rods.

http://distilleryimage3.s3.amazonaws.com/57158b9aff1211e1be6a12313820455d_7.jpg

also ordered pbm drop knuckles and going to order more parts soon. also found a new swap locally i am trying to pick up and should have it after my rip to fd Irwindale.


current parts list on the car as of now:

Engine
s13 sr20det redtop
isis intake manifold
PBM High mount
PBM intake

Suspension
PBM lca/tension rod combo
PBM RLCA
PBM Toe rods
PBM inner tie rods
Ikeya formula outer tie rods
PBM Rucas
Godspeed traction rods (got them with the car)
PBM Rear Drop Knuckles (ordered but havent arrived yet)

Wheels/brakes
Z32 front and rear brake set up
dual rear caliper set up
Work Equip 05 18x12-20
OEM 03/04 cobra 17x9+26

Interior
PBM hydro
JDM Digital Climate Control
Prosport digital boost gauge
AEM Wideband
PBM Weighted shift knob
Safc Neo

Exterior
Dmax +40mm front frenders
Origin 50mm rear over fenders
Version Select VI kit
Dmax roof spoiler

[Lil_D]

well i sold my transmission and dual caliper adapter plate so i can buy a new sr swap. well its looking like after i get back from irwindale i will be purchasing my new motor :)

[KiLLeR2001]

Sorry, but it's not a "Onevia" unless its originally a Silvia.

Carry on through with your 240sx build kind sir.

[kevinphan]

Sorry, but it's not a "Onevia" unless its originally a Silvia.

Carry on through with your 240sx build kind sir.

http://i3.kym-cdn.com/entries/icons/original/000/007/508/watch-out-we-got-a-badass-over-here-meme.png

[Lil_D]

well i got back from fd it was awesome watched my homies fanboy super hard i fanboyed a little watch my buddy matt field beast it and talked to my other buddy ryan bell about some shit im planning to do with my car

here are some pics from fd ill have more later

i met mad mike
http://distilleryimage0.s3.amazonaws.com/49dafb5615ae11e2973e22000a1c91be_7.jpg

and orido
http://distilleryimage10.s3.amazonaws.com/9d103d2c158b11e2ab6722000a1d0369_7.jpg

http://distilleryimage0.s3.amazonaws.com/9c427d56158111e282b422000a1c8870_7.jpg

http://distilleryimage6.s3.amazonaws.com/4656e9b214a111e29bac22000a1c032a_7.jpg

http://distilleryimage3.s3.amazonaws.com/d00fca0214bf11e29797123138133f0a_7.jpg

http://distilleryimage0.s3.amazonaws.com/c7862bd614c611e29fe21231380f3636_7.jpg

kado's vk56dett set up super awesome
http://distilleryimage7.s3.amazonaws.com/8dbb0e0815cf11e29cc822000a1f96e3_7.jpg

drift union is coming to wednesday night drifts this week and im picking up my motor next weekend then ill have more updates