brndck
09-17-2012, 11:57 PM
up for sale is a bare clip. it was a kouki 180sx. it is zomgjdmtyte.
no engine included. this is useful if you are doing a rhd conversion. i repeat, NO ENGINE INCLUDED.
Pickup only, NO SHIPPING.
I would prefer someone who wants the whole thing, I don't really wanna part it out bit by bit, but we'll see.....
$550 picked up in solana beach
there is a ton of stuff still on here
FIRST OFF, I do not have:
-ANY body panels. no doors, no hoods, no fenders, no bumpers, no lights, no turn signals, NO BODY PANELS
-Steering rack. already gone.
-center console
-radio trim
-digital heater control panel
-engine subframe (same as usdm anyways)
I DO HAVE:
-RHD DASH (There is a big square cut out above the glovebox, previous owner had a flip out tv screen here). all 3 defrost vents are uncracked and it has the sunload sensor for digital heater control unit
-rhd steering column
-rhd under-dash panel
-rhd hood release cable
-kouki 180sx instrument cluster. i plugged it in and powered it up, all bulbs appear to be functioning, photos updated, only 65k (km, not miles)
-steering column covers, wiper stalk and turn signal stalk. kouki 180 wiper stalk is different than usdm, this car came with airbag, so that is available too
-ign cylinder with generic key
-black carpet CARPET IS SOLD
-rhd fuse boxes and tons of wiring.
-rhd brake master cylinder and lines, master is 15/16, same as '89 non-abs z32 300zx
-rhd brake booster (maybe same as usdm? i dunno)
-rhd clutch master cylinder and line (slave not included)
-rhd firewall. i can cut it behind the shock towers or leave the full front end intact, your choice
-complete a/c setup, still intact. sr20det compressor, receiver/drier, condensor, a/c fan, all lines. i do not have the digital heater control unit, but it looks like some of the wiring and components for the digital unit are still under the dash. it is a r-134 system and as far as i can tell might still be charged? i don't see anywhere that is kinked/cut/broken/pinched/etc
-180sx front brakes (calipers, rotors, pads, spindles with ABS sensors, LCA, stock tension rods) 180sx front brakes are larger than usdm s13 front brakes
-sway bar (front) i think its same as usdm?
-coolant reservoir. one of the cleanest i've ever seen.
-rhd windshield wiper motor and linkages
-car originally had ABS so it still has wiring and plugs for it, but the ABS module has been removed.
-brake, clutch, and gas pedal with throttle cable
-awesome jdm rocks and dirt.
I'm probably forgetting shit, i'll update as necessary.
Again, i'm willing to part shit out, but i'd prefer someone who wants the whole thing.
ok now pix.....
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/530057_10151018971981595_96784511_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-snc6/263895_10151018972441595_782144269_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-prn1/528472_10151018973511595_1097635299_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/304559_10151018973986595_438925802_n.jpg
carpet after quick vacuum
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/578453_10151018974351595_2017303888_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-snc7/486873_10151018975816595_1149929123_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/601559_10151018976616595_548079144_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-snc6/199329_10151018981761595_934748686_n.jpg
a/c compressor still attached
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/427862_10151018981351595_1542142545_n.jpg
kouki cluster
http://sphotos-b.xx.fbcdn.net/hphotos-snc6/264249_10151018984641595_1670353107_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/399605_10151019576381595_853212950_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-snc7/310613_10151019575441595_1771051354_n.jpg
no engine included. this is useful if you are doing a rhd conversion. i repeat, NO ENGINE INCLUDED.
Pickup only, NO SHIPPING.
I would prefer someone who wants the whole thing, I don't really wanna part it out bit by bit, but we'll see.....
$550 picked up in solana beach
there is a ton of stuff still on here
FIRST OFF, I do not have:
-ANY body panels. no doors, no hoods, no fenders, no bumpers, no lights, no turn signals, NO BODY PANELS
-Steering rack. already gone.
-center console
-radio trim
-digital heater control panel
-engine subframe (same as usdm anyways)
I DO HAVE:
-RHD DASH (There is a big square cut out above the glovebox, previous owner had a flip out tv screen here). all 3 defrost vents are uncracked and it has the sunload sensor for digital heater control unit
-rhd steering column
-rhd under-dash panel
-rhd hood release cable
-kouki 180sx instrument cluster. i plugged it in and powered it up, all bulbs appear to be functioning, photos updated, only 65k (km, not miles)
-steering column covers, wiper stalk and turn signal stalk. kouki 180 wiper stalk is different than usdm, this car came with airbag, so that is available too
-ign cylinder with generic key
-black carpet CARPET IS SOLD
-rhd fuse boxes and tons of wiring.
-rhd brake master cylinder and lines, master is 15/16, same as '89 non-abs z32 300zx
-rhd brake booster (maybe same as usdm? i dunno)
-rhd clutch master cylinder and line (slave not included)
-rhd firewall. i can cut it behind the shock towers or leave the full front end intact, your choice
-complete a/c setup, still intact. sr20det compressor, receiver/drier, condensor, a/c fan, all lines. i do not have the digital heater control unit, but it looks like some of the wiring and components for the digital unit are still under the dash. it is a r-134 system and as far as i can tell might still be charged? i don't see anywhere that is kinked/cut/broken/pinched/etc
-180sx front brakes (calipers, rotors, pads, spindles with ABS sensors, LCA, stock tension rods) 180sx front brakes are larger than usdm s13 front brakes
-sway bar (front) i think its same as usdm?
-coolant reservoir. one of the cleanest i've ever seen.
-rhd windshield wiper motor and linkages
-car originally had ABS so it still has wiring and plugs for it, but the ABS module has been removed.
-brake, clutch, and gas pedal with throttle cable
-awesome jdm rocks and dirt.
I'm probably forgetting shit, i'll update as necessary.
Again, i'm willing to part shit out, but i'd prefer someone who wants the whole thing.
ok now pix.....
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/530057_10151018971981595_96784511_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-snc6/263895_10151018972441595_782144269_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-prn1/528472_10151018973511595_1097635299_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/304559_10151018973986595_438925802_n.jpg
carpet after quick vacuum
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/578453_10151018974351595_2017303888_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-snc7/486873_10151018975816595_1149929123_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/601559_10151018976616595_548079144_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-snc6/199329_10151018981761595_934748686_n.jpg
a/c compressor still attached
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/427862_10151018981351595_1542142545_n.jpg
kouki cluster
http://sphotos-b.xx.fbcdn.net/hphotos-snc6/264249_10151018984641595_1670353107_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/399605_10151019576381595_853212950_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-snc7/310613_10151019575441595_1771051354_n.jpg