View Full Version : sr20det starting problem
patsS14
08-15-2012, 04:53 PM
ok i have a 95 240 with a s13 blacktop the previous owner had the car hooked up to a push button. it worked fine but when the car was at a shop it broke on them. now the car wont start by turning the key all the time. it did twice when it was at the shop but hasnt since ive tried numerous of times. i just want to know what wire is supposed to be hooked up to the starter to start my car normally.. what color is the third little wire on the starter supposed to be? ps when i got the car back from the shop i put a new 15amp switch in worked for 3 days then stopped working. the starter just clicks when i push the button?
patsS14
08-15-2012, 06:23 PM
no one with an sr can go out an look at there starter?? just need to know what stock wire is hooked up to the little prong on the starter? what color and where does it run to ???
patsS14
08-16-2012, 06:06 AM
57 views no help.... where are all you sr wiring gurus at
The harness only has 1 wire that will fit there, I just seen this thread so as of right now I cannot tell you a color because its 2125 here in Japan and a tad dark. Tomorrow I will give you a solid answer!!!
patsS14
08-16-2012, 05:55 PM
thanks i appreciate it ive read its a black/yellow wire and i have 2 black/yellow wires cut by the starter and fusebox i just want to get rid of this shitty push button
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.