opticnerv
07-14-2012, 05:15 PM
ECU Pin 45 ( Ignition ) got trashed because I forgot to heat shrink something . The ignition fuse also blew out. I found the break on the board and jumped it with a wire. Car started again but wouldn't turn off. Tested the diode on the same circuit that broke and it was bad. I can replace the diode but I have no idea what kind it is. I did some research on how to identify diodes and I came up with a 1N90 +/-10 ??? I don't think that's right.
Any help would be appreciated greatly. I also found that multiple people have found themselves in the same boat but just canned their ECU.
It's the one the red wire leads to. With the blue dots.
http://i157.photobucket.com/albums/t71/opticnerv/IMG_20120714_185909.jpg
Any help would be appreciated greatly. I also found that multiple people have found themselves in the same boat but just canned their ECU.
It's the one the red wire leads to. With the blue dots.
http://i157.photobucket.com/albums/t71/opticnerv/IMG_20120714_185909.jpg