S14.5 Oregon Revamp

[richmond82]

Picked up a non complete s14.5 that had been built beat and left out in the elements to Die.. Oh yeah someone genuis had installed a huge sunroof on it which leaked like a mojo and painted (rattle canned ) the top 50% of the car...

http://i793.photobucket.com/albums/yy215/richmondca/Silvia%20Conv/IMAGE_2842.jpg


Cons when i first picked her up.

She was over revved with a Down Shift from hell
5th to 2nd and kaboom bye bye top end...
not to mention when all of this happened he was on the freeway and the hood flew up ( tommy boy style ) funking up the VIS S15 CF Hood
she had a bad boost leak and a T28 that had been starved of the proper oil it needed as they had a jimmy rigged banjo bolt ( of sorts ) out of the block feeding the turbo. Also had compressor surge from the leak being at the Greddy downpipe, sounded like a turkey LOL


First thing addressed was the fender and headlight bracket assembly. The front bumper was literally bracketed to the Head light assembly and drooping... Welding time

http://i793.photobucket.com/albums/yy215/richmondca/Silvia%20Conv/drake164.jpg

Next we addressed new brake pads all around. the fronts came with 6 piston rotoras very nice indeed !

http://i793.photobucket.com/albums/yy215/richmondca/Silvia%20Conv/drake098.jpg


Now it was on to fix the horrible " two tone try out "
this should do for the time being

http://i793.photobucket.com/albums/yy215/richmondca/Silvia%20Conv/NewImage.jpg

http://i793.photobucket.com/albums/yy215/richmondca/Silvia%20Conv/233.jpg

At its first Nissan Meet 2 weeks into its new "Relationship" With me lol

http://i793.photobucket.com/albums/yy215/richmondca/Silvia%20Conv/296.jpg

sittin right next to our TT Z32 Swap

http://i793.photobucket.com/albums/yy215/richmondca/Silvia%20Conv/295.jpg

This is just the beginning of this thread... the build has come very far since... stay tuned for updates

Had a HLSD from a S15 in it when purchased

http://i793.photobucket.com/albums/yy215/richmondca/029.jpg

took it out for a much better Cusco MZ Baby

http://i793.photobucket.com/albums/yy215/richmondca/drake060-1.jpg

Installed

http://i793.photobucket.com/albums/yy215/richmondca/027.jpg

Included this pic for the hell of it, thought it was kool. hanging out with our Z31
http://i793.photobucket.com/albums/yy215/richmondca/drake047.jpg

http://i793.photobucket.com/albums/yy215/richmondca/123/IMAG0553.jpg

Old S15 Specr T28 Wrapped mani

http://i793.photobucket.com/albums/yy215/richmondca/123/IMAG0654.jpg

New VS. Old

http://i793.photobucket.com/albums/yy215/richmondca/123/IMAG1110.jpg

http://i793.photobucket.com/albums/yy215/richmondca/123/IMAG0886.jpg

Precisions 550's and Titan Rail - old

http://i793.photobucket.com/albums/yy215/richmondca/123/IMAG0943.jpg

Greddy Catch Can and Titan Rail brought back to life

http://i793.photobucket.com/albums/yy215/richmondca/123/IMAG1119.jpg

http://i793.photobucket.com/albums/yy215/richmondca/123/IMAG0898.jpg

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20120113_163516.jpg

http://i793.photobucket.com/albums/yy215/richmondca/123/IMAG0752.jpg

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20120113_163706.jpg

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20120113_163307.jpg

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20120113_150323.jpg

http://i793.photobucket.com/albums/yy215/richmondca/20120613_171950.jpg

http://i793.photobucket.com/albums/yy215/richmondca/20120613_094116.jpg

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20120113_163724.jpg

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20120113_154617.jpg

http://i793.photobucket.com/albums/yy215/richmondca/20120529_193006.jpg

http://i793.photobucket.com/albums/yy215/richmondca/20120527_073751.jpg

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20120818_101446.jpg

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20120818_101429.jpg


Update: We are a few days away from starting. new Haltech iun with ignition tach and start signal lines in.. pics of completed LS2 to SR20DET Plug wires, updated dash with new Grip Royal Wheel and a few other randoms

http://i1216.photobucket.com/albums/dd370/drake_deyoung/IMG_20121113_163129.jpg

http://i1216.photobucket.com/albums/dd370/drake_deyoung/IMG_20121113_162031.jpg

Fuse Block in
http://i1216.photobucket.com/albums/dd370/drake_deyoung/IMG_20121123_200804.jpg

Magnecor designed LS to SR Coil Wires Wiring Specialties Designed PAtch Loom Harness for Coils to tie into ECU harness
http://i1216.photobucket.com/albums/dd370/drake_deyoung/IMG_20121123_105442.jpg

http://i1216.photobucket.com/albums/dd370/drake_deyoung/IMG_20121123_105648.jpg

Time to finish the Carbon and Metal Dash and get down to business on finalizing Haltech Install
http://i1216.photobucket.com/albums/dd370/drake_deyoung/IMG_20121124_175308.jpg

Dremel to prep the cut
http://i1216.photobucket.com/albums/dd370/drake_deyoung/IMG_20121124_175349.jpg

Sparkin Up
http://i1216.photobucket.com/albums/dd370/drake_deyoung/IMG_20121124_175616.jpg

Test Fit
http://i1216.photobucket.com/albums/dd370/drake_deyoung/IMG_20121124_195425.jpg

After an 8 hour garage day - chillin with my "Bride" and my Bride lol
http://i1216.photobucket.com/albums/dd370/drake_deyoung/IMG_20121124_210851.jpg

Helper for interior Sound Deadener REmoval

http://i793.photobucket.com/albums/yy215/richmondca/123/IMAG0976.jpg

Dry Ice is a our best friend for this job

http://i793.photobucket.com/albums/yy215/richmondca/123/IMAG1002.jpg

Now were talkin

http://i1216.photobucket.com/albums/dd370/drake_deyoung/IMG_20121125_155232.jpg

[208s14.5]

looks good so far, where abouts in oregon are you? im currently picking up the peices of my s14.5, trying to fix the po mistakes.

[richmond82]

looks good so far, where abouts in oregon are you? im currently picking up the peices of my s14.5, trying to fix the po mistakes.

I am in Southern Oregon Medford area. My wife is from Cour De Lane Idaho.
And yeah fixing someone elses bonehead moves sucks royal donkey !

[Coolwhip]

looking good

[T.O.D.]

Glad she's in a better home, keep it movin!

[Big Zee]

I have a MZ diff, I love it, it locks up so nice, you will not be dissapointed with this diff :)

[208s14.5]

Yea I'm in the current process of wiring the headlights up the proper way, but can't seem turn signals to work when I have the markers hooked up.

[richmond82]

I have a MZ diff, I love it, it locks up so nice, you will not be dissapointed with this diff :)

Thanks for the reply Big Zee the MZ is a nice diff and i got it from Formula D Driver Luke Lonberger out of his S14 with 400 miles of use...

I got to run it for a few months before taking the car down for rebuild

[richmond82]

Thank you !

[richmond82]

Glad she's in a better home, keep it movin!


She is for certain,thank you. Got her back from Dyno Shop about 4 weeks ago.

Made great power but the dyno shop wasnt very thorough in their Diagnostic and R & R so i can going through it all hose by hose, wire by wire
have a drift event on the 4th of next month that i would like to unveil the car in.

The local drivers havent seen the car for about a year now

[richmond82]

So close to being finished.. need lines made up by Fluid Connectors for the ABS delete and the ASD Hydro install.... intake getting broken stud removed today

[richmond82]

looking good

Thank you for the kind words !

[richmond82]

Garrett DBB GT3076 to arrive next week... gotta get a downpipe made before the dec 10th tune date /// good problem to have indeed

[richmond82]

Just got my laptop back from comp shop. upgraded hard drive for low cost.. yay

now i can run the haltech software manager with no issues.

installed this am. stay tuned for fresh air calibration

just need to wire in my tps check all grounds then rock and roll

on a even better note i just picked up a Garrett GT 3076 plan to install and make up new down pipe before tune session..

[Bushido]

what did you paint the intake/catchcan/valve cover/turbine/fuel rail with?

loving that finish and color.

[sex14]

48 laws of power. good read :D

[richmond82]

Just got Temp Coil Bracket done
Will be threading studs into firewall for individual packs soon
http://i1216.photobucket.com/albums/dd370/drake_deyoung/IMG_20121202_100945.jpg

[richmond82]

48 laws of power. good read :D

yes sir it is. good attention to detail !

[richmond82]

Waiting for the GT 3076 to get here i scored it from a fellow zilvian with low miles and low boost abusing levels

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20121201_221726.jpg

[richmond82]

Thank you

These guys sponsor my car and do the coatings

https://www.facebook.com/pages/Rogue...70968462919037

And the color is from Cerakote

Cerakote Coatings

[richmond82]

Going to be going through all of my grounds and harness one final time after work today. hope to have a permanent bracket solution this week. going to make up 8 studs that are going to be mounted on firewall.

[richmond82]

Also something i didnt note before is that we are using a top mount fuel rail and top mount injectors and still able to retain the Stock Intake Manifold.... clearance from bottom of intake mani to top of fuel rail is maybe 3 sheets of paper...

lots of machining to make this work but well worth it and definatly a one off

[richmond82]

Finally got the fittings for the Coolant port on the block and the Port on the Water Neck and the ports on the Turbo. Lines made up and going to picked up this am. Car is 98% start ready. need to call Haltech and ask a few questions about the fresh air calibration and the pre start process.

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20121206_134545.jpg

[richmond82]

planning to replace the drivers harness this weekend. Talked with Eric at Haltech Tech Support yesterday to get clarity on a few things for calibration and start up.

Ordered up new lines to be made for the coolant feed and return including the feed fitting for the water neck and the return for the block $130 later.

got the coolant feed and return lines and fittings figured out today... Slow progress but ill take it

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20121219_171609.jpg

[richmond82]

found more random pics - i hope to get more organized soon

Seam Sealer and Primer Floor
http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/seamandsealer_zps9c550640.jpg

Interior Prepped for Spray

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/tapedup_zps24b738a0.jpg

Trunk Done and Drying

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/paintprep_zpsbf6eb848.jpg

Interior Shot

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/after_zps8a9816b0.jpg

Back Seat Drying

http://i1216.photobucket.com/albums/dd370/drake_deyoung/64865_386790181333104_626250920_n_zps2d715ce0.jpg

Wide Rears - I know i know they are Rotas

http://i1216.photobucket.com/albums/dd370/drake_deyoung/big_zpsd874cced.jpg

Intake Mani MAchined and Power FC Air Intake Temp Tapped also relocated IACV breather also relocated for fuel rail clearance

Top Mount RC 750's and Titan Rail

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/titan_zpsb5f740e3.jpg

Time to Run Fuel Lines

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/fuel_zpsa8191603.jpg

Aeromotive FPR mock up time

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/it_zps2206eabb.jpg

Random Intercooler piping shot

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/intpipe_zps048a8938.jpg

Q45 TB Adapter in begining phases

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/inprocess_zpsd7ef2893.jpg

Lookin Straight Grizzly

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/qadapt_zpscf7c0dc8.jpg

TB Comparison

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/comparison_zpse8095423.jpg

Keepin underhood temps low

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/coolit_zps14e7657b.jpg

Sorry Ozone - WG Dump pipe

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/dp_zps26d495c8.jpg

Cool Weld pic

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/weldintime_zpsa3a9e62c.jpg

Still my number one Wrench

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/2betterthan1_zpsc6570fed.jpg

Before it all startedd

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/old_zpsad96c2a3.jpg

Old Power FC DJETRO Setup

http://i1216.photobucket.com/albums/dd370/drake_deyoung/063.jpg

Wiring Specilaties ECU Harness with all Haltech Sensors integrated

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/haltechharnessandplatpro_zps66c97bad.jpg

hmm picked this up randomly, look at her just begging o be swapped and dropped... lol

http://i1216.photobucket.com/albums/dd370/drake_deyoung/Builds/vert_zps8d7a61a0.jpg

[richmond82]

so to update the build. a pin on the Haltech Map Sensor got destroyed. ordered new one today. I know i know i can go to any junk yard and find a 3 bar GM sensor but i want to ensure i am using all new plugs and connectors on this harness.

I think i am going to start installing the 3076r this week

[richmond82]

This has been a great weekend !

how she sat before starting

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20121205_163737.jpg


Organized and ready to work

http://i1216.photobucket.com/albums/dd370/drake_deyoung/IMG_20121229_094026.jpg

Pre Wrench High Five needed

http://i1216.photobucket.com/albums/dd370/drake_deyoung/IMG_20121220_190038.jpg

Turbo Mani Wastegate off

http://i1216.photobucket.com/albums/dd370/drake_deyoung/imagejpeg_4.jpg

Yes i am a Boost Junky

http://i1216.photobucket.com/albums/dd370/drake_deyoung/imagejpeg_3.jpg

Getting Mock up ready

http://i1216.photobucket.com/albums/dd370/drake_deyoung/imagejpeg_2_7.jpg

[richmond82]

Who needs a Rear View mirror anyway ?

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20130101_170610.jpg

My Favorite place to sit and think

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20130101_170309-1.jpg

Intercooler piping will not need to be modded

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20130102_181038.jpg

Minor Mod needed to the be made to the Down pipe

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20130102_172219.jpg

[richmond82]

Finally got coolant feed fittings and line worked out

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20130106_142915.jpg

With Oil Feed line installed


http://i1216.photobucket.com/albums/dd370/drake_deyoung/20130106_143028.jpg

have the following left to do before Calibrating Haltech Plat Pro

Fix pin on Haltech Map Plug - Finish Brake Lines and Install ASD Hydro - Clean up vacuum lines - Coolant Return line away from Manifold and Steering Rack -Finish Tread fitting for Grenade Shifter - Throttle Cable and Stop Spring

[richmond82]

Current Down pipe will not work for the new turbo... very close but no cigar. off to modify ! !

[richmond82]

my Friend Scotty turns out to be skilled with fabrication and welding...

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20130109_164318-1.jpg

if it doesnt work cut it again.. notch cut and then reweld it that is to get the angle right

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20130109_163538.jpg

[richmond82]

A few hours of Fab- BAM !

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20130109_193131-1.jpg

Fittament perfect. clearance for the Steering rack and the Manifold runner

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20130109_191132-1.jpg

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20130109_191111-1.jpg

Rewrapped in Thermo - Tec Bppst nipple added to turbo to intercooler pipe coupler for boost reference. Modified the stock Throttle Cable Bracket to work.

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20130109_210905-1.jpg

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20130109_210225-1.jpg

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20130109_193828-1.jpg

http://i1216.photobucket.com/albums/dd370/drake_deyoung/20130109_193846-1.jpg

snapped a few more pics of the Vert Progression not too much to report yet

http://i1216.photobucket.com/albums/dd370/drake_deyoung/imagejpeg_2_4.jpg

http://i1216.photobucket.com/albums/dd370/drake_deyoung/imagejpeg_2_3.jpg

[richmond82]

Been some time

78567

78568

78569

78570

[richmond82]

78571


78572

[richmond82]

Cant wait to get more done.

[future]

I have that craftsman light! Shit sucks lol

[richmond82]

http://images.tapatalk-cdn.com/15/11/26/4587a690c239a7916c8375ce2d70de1e.jpg

Sent from my SM-G900P using Tapatalk

[richmond82]

89091

Sent from my SM-G900P using Tapatalk

[richmond82]

89093

Sent from my SM-G900P using Tapatalk

[ZenkiDeven19]

Bruh your back! Keep us updated! :)

Sent from my SM-N900V using Tapatalk

[richmond82]

Sleep is the Cousin of Death ----- :naughty:

102830

[richmond82]

102831

102832

[richmond82]

On the RDE - Link Dyno - New Turbo Wheel upgrade - 465 410tq 22PSI and 588 31PSI max 606 31 PSI

102834

[greenwood]

Neat!

Wear some protective glasses when angle grinding, I got some stuff in my eye once and it sucked and that was when wearing glasses!

Our eyes are unfortunately fragile.

Verts are cool with a cage!

[richmond82]

amen to that. Some friends aren't so mindful of their health lol. Fortunately this is not me.