View Full Version : Oil in Turbo Elbow
xh3nry
05-31-2012, 10:42 PM
Hi I have a stock S13 Sr20det Black Top. I was changing the 2 bolt gasket for the turbo elbow and noticed a little bit of oil in the 2 bolt elbow before the turbo and some in the stock intake (rubber). Is this a bad thing? Is the oil catch can bad or something? Help :squint: !
Jhester
06-01-2012, 02:21 PM
oil through intake without a catch can is fairly normal. i had to install an after market oil catch can to keep oil from saturating the intake filter.
fliprayzin240sx
06-01-2012, 05:50 PM
Oil in the exhaust side, more than likely the turbo seals are done. I'd pop the inlet and check for shaft play. If it moves up, down, left, right, it might still be good. If it goes in and out, turbo is done.
xh3nry
06-01-2012, 07:02 PM
So there is not supposed to be any oil in there at all? Turbo is still good, spools and there is no smoke at all. No weird sounds
project-c2
06-01-2012, 08:25 PM
Check if there is oil on the tube from the catch can. Also, compression and leak down test.
davidpham
06-01-2012, 09:26 PM
oil catch can!
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.