View Full Version : rb20 wiring help
chubz7793
05-26-2012, 09:17 PM
hey guys i have done a rb20 swap in my 92 hacth i used carl h "s wiring guide and everything is working and getting power. i turn the key and nothing happens no crank click nothing im a little lost as to what it could be please any ideas ?
bardabe
05-27-2012, 10:43 PM
start by checking all your grounds.
two40guy
05-28-2012, 02:41 PM
i know my car did the same thing, turns out my started signal wire had a crappy end on it and came off, when i turned the key it would just do nothing. check that out. and if thats all good, yeah id check grounds maybe fly through wiring one more time
chubz7793
05-28-2012, 08:20 PM
I got it it was a bad starter ground it runs decent only problem is when I give her gas it dies out and goes back to idle any ideas
N2HIFI
05-28-2012, 09:28 PM
Check your maf, unplug it to see if it revs to 2500 if so your wiring for the maf is wrong
chubz7793
05-29-2012, 06:19 PM
ok guys i tried the car running with out the maf as soon as i hit the gas it dies out it doesnt rev at all now i have a stock fuel pump " i know i need a 255" but its coming could that be why ?
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.