Tomei Z32 Pigtail, Need Help (Pics inside)

[kilcourse64]

The instructions for this are in japanese and I have no idea how to wire it. I'm almost 100% sure that I've got the ground correct (mainly because it was the longest wire), but I'm pretty much clueless regarding the other three wires. I had a friend wire it the way he thought was correct, but I'm having my doubts. I would really appreciate any advice on how to install this correctly.


Shows the wires coming from the harness (green on the left, black w/ white stripe in the middle, and red on the right)
http://i1104.photobucket.com/albums/h329/Kilcourse91/GOPR0124.jpg

Shows the plug (same orientation on the other side)
http://i1104.photobucket.com/albums/h329/Kilcourse91/GOPR0128.jpg

Shows how my friend wired it
http://i1104.photobucket.com/albums/h329/Kilcourse91/GOPR0129.jpg

Shows Tomei Z32 pigtail w/ metal clip side up. White on the left, brown to the right of it (almost positive this is a ground, you can see the extreme length in the background), then to the right of the ground is black, and to the right of the black is black w/ white stripe (but you can't see the white stripe from this angle)
http://i1104.photobucket.com/albums/h329/Kilcourse91/GOPR0136.jpg

Please help guys, I'm lost here

[kilcourse64]

Nobody knows how to wire this?

[kilcourse64]

Here's the diagram that the Tomei Z32 pigtail came with
http://i1104.photobucket.com/albums/h329/Kilcourse91/IMG_0020-1.jpg

Still very confused, any help would be much appreciated

[kilcourse64]

This is such a common modification, I can't believe nobody can figure it out

[Pinggg]

It's been cover many times, you could of just search on google and would of found out your answer. Nobody answer back to this thread probably because it was so simple to figure out.. but i'm glad you got it now :s101:

[E30Napalm]

FOR Z32 MAF USERS, THE PINOUT IS:
(ECU retune is required)
Z32 MAF PIN SR WIRE COLOR FUNCTION
A - Not connected
B White MAF signal
C Black MAF Ground
D - Ground (connect to C)
E Black / White +12V Ignition
F - Not Connected

[kilcourse64]

FOR Z32 MAF USERS, THE PINOUT IS:
(ECU retune is required)
Z32 MAF PIN SR WIRE COLOR FUNCTION
A - Not connected
B White MAF signal
C Black MAF Ground
D - Ground (connect to C)
E Black / White +12V Ignition
F - Not Connected

Thanks for posting! I'm still confused (please excuse my lack of knowledge for electronics). I'm basically looking for someone to tell me which colors connect to the colors on the Z32 pigtail.

[kilcourse64]

Does this look correct?

http://i1104.photobucket.com/albums/h329/Kilcourse91/IMG_0004-4.jpg

[cotbu]

No it's not correct, The mafs has it's own ecu ground for reference, looks like you're sending the ecu mafs ground to ground then grounding the mafs wires to ground. Connect C to the harness then connect D to ground or both to the harness.

It might work like you have but it's not right!