txrxs
05-20-2012, 09:14 PM
I need to know what wires on an obd2 s14 engine harness need power (12v) in order to have a functioning car.
The short:
The car (ka24det s14) is wired on an 8 switch relay panel. No body harness. Switches for ign, start, fuel, lights, fan, blah. The engine harness is mostly in tact, after some work.
After a bit of research, it seems that only the eccs relay pin 4 and ign switch pin 38 need 12v to have a running car. This proved correct, as the car does start and run, although like total shit.
Am I missing power to anything else?
The short:
The car (ka24det s14) is wired on an 8 switch relay panel. No body harness. Switches for ign, start, fuel, lights, fan, blah. The engine harness is mostly in tact, after some work.
After a bit of research, it seems that only the eccs relay pin 4 and ign switch pin 38 need 12v to have a running car. This proved correct, as the car does start and run, although like total shit.
Am I missing power to anything else?