Garage Clean Out! RB, S14, KA, etc

[xxsptcuztomsxx]

I have the following items for sale. I will accept reasonable offers on most everything but please do not low-ball me. Contact info is located below.

KA Stuff

OEM S14 Radiator with shroud and hoses. Good shape with no leaks. A few bent fins as expected for a used radiator.
$45
http://i49.tinypic.com/8zdyfo.jpg

S14 Intake with all hoses, tubes, and MAFS. Normal wear
$40
http://i47.tinypic.com/2lcv6rr.jpg

KA24DE Starters. Both are in good working order.
$25
http://i50.tinypic.com/28laom1.jpg

KA24DE ECU’s – Both are auto. One is from a S14 and the Re-manufactured is from a S13.
$25
http://i47.tinypic.com/w6yr5v.jpg
http://i45.tinypic.com/2q9g8pk.jpg

S14 Auto trans ecu – Good shape. Removed after 5spd swap
$15
http://i48.tinypic.com/amzcev.jpg

KA24DE power steering pumps – Good shape.
$20
http://i50.tinypic.com/e7e5q1.jpg

S14 Resistor..forget what it is for
$4
http://i48.tinypic.com/2usvt39.jpg

S14 Chassis Stuff

S14 base model wiper and combination switch
$10 each
http://i45.tinypic.com/2ikr0hi.jpg

S14 door latch.
$20
http://i48.tinypic.com/19xrp5.jpg

S14 windshield washer reservoir. Good shape. No leaks.
$12
http://i48.tinypic.com/1ptapt.jpg
S14 passenger airbag.
$75
http://i46.tinypic.com/n51l3m.jpg

S14 rear sway bar. Includes mounting brackets
$45
http://i49.tinypic.com/1pfqkz.jpg

S14 passenger side corner light. No cracks or major damage. Light scratches. Can be sanded out.
$15
http://i48.tinypic.com/2he8y0z.jpg

S14 metal shifter ring that is used to mount the rubber boot.
$5
http://i48.tinypic.com/4kif0y.jpg

RB Stuff

RB20DET Coil packs. Good shape. All boots are included.
$15 Each
http://i47.tinypic.com/35m1gmq.jpg

RB20DET OEM crossover pipe with bypass valve.
$30
http://i47.tinypic.com/29cvpjk.jpg

RB25DET intake manifold. Upper and lower parts only. No accessories.
$40
http://i49.tinypic.com/1z4viqd.jpg

RB exhaust manifold. Modified with external gate with built in extension.
$35
http://i45.tinypic.com/zsvi8.jpg

RB20DET oem injectors. Set of five.
$8 each
http://i49.tinypic.com/35bdnw0.jpg

RB20DET valve cover gaskets. Used but in good shape if your in a pinch
$25
http://i46.tinypic.com/29ooq34.jpg

RB20DET crank sprocket. Used. Shows signs of wear and hammer marks. Some teeth are slightly damaged. Shouldn’t effect usability.
$18
http://i46.tinypic.com/qp15yu.jpg

RB20DET air regulator. Good shape. Painted blue.
$16
http://i47.tinypic.com/35k8uw9.jpg

Misc.

DEI intercooler sprayer. Good shape.
$35
http://i47.tinypic.com/2i1315i.jpg

Autometer 2 5/8” carbon fiber volt gauge. New in box
$20
http://i47.tinypic.com/2eg60sl.jpg

Holset hx35/h1c downpipe flange.
$20
http://i47.tinypic.com/2chaqsg.jpg

SR downpipe. Was used in my RB swap. Might be able to get you close if doing an RB.
$35
http://i47.tinypic.com/xntg7t.jpg

All Prices are plus shipping. I accept paypal payments only. If you have any questions please do not hesitate to ask.

Texts messages will yield the quickest response.
865-323-5760

[blkkouki]

How much for the modified RB exhaust manifold shipped to 71459?

[USMChris]

Is that trunk latch for the top or bottom part of the trunk?

[xxsptcuztomsxx]

How much for the modified RB exhaust manifold shipped to 71459?

35 + 34.86 shipping.

Is that trunk latch for the top or bottom part of the trunk?

It is actually the driver side door latch that goes on the door itself.

[AS240]

did you ever get to run that manifold? and if you did, what turbo did you use. thanks

[speedkingrc]

wiper switch ? to 23435

[180sxs13]

interested in downpipe . do you think it will work with sr20 engine ?

[RB240Coupe]

interested in downpipe shipped 24277

[Zenk1_love]

Do all the RB coil packs work?

[team13]

ill take metal ring to 52001

[blkkouki]

Are you interested in any trades?

[USMChris]

35 + 34.86 shipping.



It is actually the driver side door latch that goes on the door itself.

Well do you have a trunk latch? Haha

[xxsptcuztomsxx]

did you ever get to run that manifold? and if you did, what turbo did you use. thanks

I switched from a tial to a turbosmart wastegate and it caused fitment issues so i purchased another manifold and re-modified that one. So no, I never ran this manifold. It is all tig welded with Inconel rods...The right way to weld cast to steel. It was intended to be used with a Holset HX35.

wiper switch ? to 23435

15 shipped.

interested in downpipe . do you think it will work with sr20 engine ?

It is made for a RWD SR. Let me know.

interested in downpipe shipped 24277

55 shipped. Let me know.

Do all the RB coil packs work?

Yes they all work. I don't sell broke shit. I switched to GN coils on my RB

ill take metal ring to 52001

Metal ring is sold. Sorry

Are you interested in any trades?

Possibly. What do you have? What are you interested in?

Well do you have a trunk latch? Haha

No, sorry bud.

[xxsptcuztomsxx]

How much for the modified RB exhaust manifold shipped to 71459?

70 bucks...Let me know.

[xxsptcuztomsxx]

Bump. All reasonable offers will be considered.

[KoukiMonster0917]

Holset flange, shipped to 28540?

[xxsptcuztomsxx]

Holset flange, shipped to 28540?

28 shipped.

[727joe88]

I'm interested in the coil packs if u got them still how much shipped to Florida I want all of them u do pay pal

[xxsptcuztomsxx]

I'm interested in the coil packs if u got them still how much shipped to Florida I want all of them u do pay pal

Still have them and PayPal is the preferred payment method. PM or text me for payment details.

[BenArtM80]

are you willing to ship just the fan shroud? What's the best price you could do to Savannah GA 31405?

Thanks

[xxsptcuztomsxx]

are you willing to ship just the fan shroud? What's the best price you could do to Savannah GA 31405?

Thanks

No shipping. It isn't worth the hassle to ship it considering what it will sell for. Sorry