S13 Blacktop SR20DET Part Out! OEM & Aftermarket!

[s13 drifta]

I am parting out a great condition s13 blacktop sr20det. The motor was running well before being dismantled. The reason it was taken apart were intensions of building it to hold more power. I don't have time to build a motor right now, so all parts are up for sale. This entire motor is very clean and no parts are damaged. I have all bolts and small parts bagged and labeled.

If you see anything you are interested in purchasing post reply or PM me.
All prices do not include shipping, please leave zip code for quotes.

Long Block:

Valve cover (one broken tab in rear, good for s13.4 cover)-$50
Blacktop head w/ cam caps, valves, springs, retainers, and seals-$250
OEM cams-$70 for pair
Cam gears-$30 for pair
Rocker arms-$80 for all 8
Lifters-$80 for all 8
Shims-$20 for all 16
Oil feed tubes-$20 for pair
Head bolts w/ washers-$20 for all

Timing chain tensioner-$40
Timing chain-$20
Timing chain guides-$20
Lower timing gear-$10

Block-$300
Crankshaft-$200
Rods w/ ends & bolts-$80 all 4
Crank girdle -$30
Windage tray-$20
Upper oil pan-$60
Lower oil pan (small dent)-$20
Oil strainer-$20
Rear main seal w/ housing-$15
Oil pump spacer/collar-$10
Crank bolt-$8

http://img846.imageshack.us/img846/7185/025zj.jpg


http://img233.imageshack.us/img233/9576/024pqj.jpg

http://img829.imageshack.us/img829/9608/027rdm.jpg

OEM cams-$70
http://img714.imageshack.us/img714/7574/020uqk.jpg

Oil feed tubes-$20 for pair
http://img528.imageshack.us/img528/2527/022mz.jpg

All bolts bagged and labeled
http://img638.imageshack.us/img638/7615/026ou.jpg

Oil sandwich plate-$30
http://img444.imageshack.us/img444/2627/018ag.jpg

Flex plate-$40
http://img839.imageshack.us/img839/3964/023lxo.jpg

OEM flywheel-$50
Flywheel bolts-$30 for all 8
http://img39.imageshack.us/img39/4213/022cy.jpg

Sr20 Exedy stage 1 clutch (lightly used)-$60
http://img809.imageshack.us/img809/4919/021wra.jpg

Sr20det transmission w/ all sensors-$290
http://img193.imageshack.us/img193/3918/020ij.jpg

Sr20det starter-$80
http://img84.imageshack.us/img84/160/009cfv.jpg

Ignitor chip-SOLD
http://img593.imageshack.us/img593/8859/001pgg.jpg

Redtop #62 ecu (works with blacktop)-$100
http://img444.imageshack.us/img444/3241/010tsv.jpg

Coil packs-$70 for all 4
http://img851.imageshack.us/img851/3044/011cu.jpg

Crank angle sensor-$100
http://img16.imageshack.us/img16/4681/019ydq.jpg

Knock sensor w/ harness-$30
http://img151.imageshack.us/img151/1745/016xkn.jpg

Oil strainer-$20
http://img191.imageshack.us/img191/417/002fye.jpg

Water outlet w/ bolts-$30
http://img39.imageshack.us/img39/6253/016jb.jpg

Water inlet w/ bolts-$20
http://img707.imageshack.us/img707/636/003gdh.jpg

Thermostat housing w/ bolts-$20
http://img825.imageshack.us/img825/2519/004ju.jpg

Brand new OEM Thermostat-$20
http://img585.imageshack.us/img585/1025/005zvn.jpg

Temp sensor housing-$20
http://img689.imageshack.us/img689/7564/002qlun.jpg

Temp sensor for gauge-$10
Temp sensor for ECU-$10
Temp sensor harness-$15
http://img803.imageshack.us/img803/2780/024dx.jpg

S13 intake manifold-$50
http://img832.imageshack.us/img832/8123/004nsh.jpg

Intake manifold brackets-$20 for all
http://img585.imageshack.us/img585/4889/017ur.jpg

S13 throttle body w/ auto TPS-$50
http://img802.imageshack.us/img802/2788/005te.jpg

370cc Injectors-SOLD
Fuel injectors caps w/ screws and washers-$5 each
S13 fuel rail-$25
SR20 fuel pressure regulator-$25
http://img717.imageshack.us/img717/2065/007ufo.jpg

Lower oil pan w/ small dent-$20
http://img577.imageshack.us/img577/9536/010uip.jpg

Complete alternator bracket w/ bolts-$30
http://img406.imageshack.us/img406/8932/015yh.jpg

Engine mount brackets-$40
http://img713.imageshack.us/img713/6458/014iqs.jpg

OEM turbo elbow-$20
http://img803.imageshack.us/img803/8038/012gb.jpg

T25 turbo outlet-SOLD
http://img198.imageshack.us/img198/1406/025qf.jpg


Aftermarket Parts:

Godspeed Gt3076r turbo w/ wastegate (used few hrs.)-SOLD
http://img831.imageshack.us/img831/5623/017fw.jpg

Goodridge water return line-$40
http://img204.imageshack.us/img204/8887/240parts218.jpg

3" turbo elbow (used few hrs.)-SOLD
http://img859.imageshack.us/img859/4193/020pb.jpg

3" down pipe ( used few hrs.)-$60
http://img850.imageshack.us/img850/9387/008vkf.jpg

Oil feed banjo bolt-$10
T25 oil restrictor-$10
http://img827.imageshack.us/img827/8426/195uo.jpg

Turbo gaskets-SOLD
http://img856.imageshack.us/img856/4379/021pqg.jpg

CXracing hot pipe with wastegate nipple-SOLD
http://img194.imageshack.us/img194/9686/013hd.jpg

CXracing 2 piece cold pipe (brand new)-$50
http://img854.imageshack.us/img854/1649/014wv.jpg

Steel cold pipe painted aluminum-$50
http://img46.imageshack.us/img46/5605/001urr.jpg

Q45 MAF-$50
http://img402.imageshack.us/img402/8794/007wvx.jpg

Nismo SR/KA thermostat ( around 4k miles)-$40
http://img100.imageshack.us/img100/1245/006lo.jpg

Peak Performance transmission mount w/ hardware-SOLD
http://img225.imageshack.us/img225/3848/009lf.jpg


Thanks for looking, let me know if you need anything.

[tapdeznutz]

Oil feed tubes-$20 for pair
http://img528.imageshack.us/img528/2527/022mz.jpg

OEM turbo elbow-$20
http://img803.imageshack.us/img803/8038/012gb.jpg

T25 turbo outlet-$20
http://img198.imageshack.us/img198/1406/025qf.jpg

Goodridge water return line-$40
http://img204.imageshack.us/img204/8887/240parts218.jpg

Oil feed banjo bolt-$10
T25 oil restrictor-$10
http://img827.imageshack.us/img827/8426/195uo.jpg

Turbo gaskets-$5 each
http://img856.imageshack.us/img856/4379/021pqg.jpg

give me a shipped price for all this stuff to long beach, ca 90807 thankx

[SonnyBoy]

What condition is the timing chain in?
And is that all I need to replace my old timing chain?
My car back fires lol

[s13 drifta]

give me a shipped price for all this stuff to long beach, ca 90807 thankx

I sent you a PM with a total price. Thanks



What condition is the timing chain in?
And is that all I need to replace my old timing chain?
My car back fires lol

The timing chain is in great condition. The motor only had around 40k miles.
If your timing chain is loose I would recomend replacing the guides and tensioner as well.

[penco]

I just need 1 lifter and the main screw that holds the power steering line down. Pm me if we can work something out.

[xSoCalxRiderx125]

Happen to have the clutch fan and shroud?

[juanm203]

hey how much for 3 in turbo elbow and 3 in down pipe shipped to 90044

[4banger]

Do u have the throttle cable bracket that goes on the i/m?

[s13 drifta]

I just need 1 lifter and the main screw that holds the power steering line down. Pm me if we can work something out.


I would like to sell all lifters together as a set, unless I have a buyer for the rest.
Do you need the P/S banjo bolt?

Happen to have the clutch fan and shroud?

I have a clutch fan from a ka24de that I modified to fit a sr20 if you are interested.

hey how much for 3 in turbo elbow and 3 in down pipe shipped to 90044

I sent you a PM with a total.

Do u have the throttle cable bracket that goes on the i/m?

I don't have a throttle cable bracket, let me know if you need anything else.

[visitor]

turbo gaskets -sold

[North]

How long was the transmission mount used for?

[s13 drifta]

How long was the transmission mount used for?

Less than 1 month.

[slow92]

I will take the trans mount off of your hands as long as it isn't already spoken for. Plus, I am local.

[penco]

Yes, i need the p/s banjo bolt. How much shipped to 53223?

[QUOTE=s13 drifta;4453137]I would like to sell all lifters together as a set, unless I have a buyer for the rest.
Do you need the P/S banjo bolt?

[s13 drifta]

Yes, i need the p/s banjo bolt. How much shipped to 53223?

[QUOTE=s13 drifta;4453137]I would like to sell all lifters together as a set, unless I have a buyer for the rest.
Do you need the P/S banjo bolt?

$15 shipped.

[Tkwjh07]

i need that fuel rail as soon as possible!

[s13 drifta]

i need that fuel rail as soon as possible!

I have it ready to go. $35 shipped.

[s15willy]

hey price on the crank shipped to 33186

[signals13]

Is the thermostat still good? Ever come to Vegas?

[s13 drifta]

hey price on the crank shipped to 33186

$300 shipped to Miami, FL

Is the thermostat still good? Ever come to Vegas?

Yeah its in great condition and lightly used.

[2LiterTurbo]

still have the goodridge water return line?

[s13 drifta]

still have the goodridge water return line?

Yes, I still have it. $50 shipped.

[nathan101]

im interested in that crank..how much shipped to 34759

[khalimadeath]

Super clean part out.

[Boostd2]

Will the turbo elbow + downpipe fit with stock t25 180sx blacktop SR?

[kota2240]

Do you have the bottom lower piece of the hot pipe that connects to the intercooler? if so pirce shipped to 23112

[s13 drifta]

im interested in that crank..how much shipped to 34759

$300 shipped with insurance.

Super clean part out.

Thanks, took me a whole day to post everything.

Will the turbo elbow + downpipe fit with stock t25 180sx blacktop SR?

Yes, it will fit any t2 turbos.

Do you have the bottom lower piece of the hot pipe that connects to the intercooler? if so pirce shipped to 23112

No, just some small pieces.

[thursdaymike]

Pm sent on turbo elbow

[s13 drifta]

First bump, stuff is getting sold. Get what you need before its all gone.

[norcals13]

Would u ship the cx hotpipe to sacramento cali and how much?

[s13 drifta]

Yes, $60 shipped.

[thegentlemen]

T25 turbo outlet sold!

[s13 drifta]

Last bump, let me know what you need.

[otto_3478s]

Block with rotating assembly shipped to 77066? and empty block price as well

[s13 drifta]

Block with rotating assembly shipped to 77066? and empty block price as well

I have a pending sale for the bare block tomorrow. I will let you know if it doesn't go through.

[Gi_joeee]

PM me your phone # for those parts I'm buyin tonight !