JGY Customs, DO NOT BUY from them!

[hashim]

fellas, so my sr23det needed new sleeves, contacted JGY and they told me that the sleeves they have should fit no problem, well the machine shop removed my old darton sleeves and immediately they were different, the darton have a stepped design at the top of the cylinder bore, and are 10 thous bigger than the JGY, called JGY they (andrew) tell me, bore the old sleeve to fit the new one so i have a sleeve ontop of a sleeve in the block, my machine shop couldnt believe this and called and talked with them directly, same thing they told them and that they do that all the time! anyway i call back and ask if i can return since this sleeve cannot in anyway be used it was never installed just removed from the wrapping, they tell me no, they've never had a sleeve returned and there are no return policies on them, ebay or craigslist is my only option. I got lucky and a friend needed them for a stock block sr, so i sold them and some head studs for the price the darton cost and got the correct sleeves. Guys please do not buy from these crooked people, they were so nice when i wanted to buy parts but afterwards, they were completely ignoring my issue.

[waxball88]

So you bought sleeves assuming that they would have the same design/sizes as your other ones? Sounds like a mutual fail

[Def]

So you bought sleeves assuming that they would have the same design/sizes as your other ones? Sounds like a mutual fail

They told him they would fit in the place of his old ones. What are you, slow or something boy? :picardfp::facepalm: :facepalm: :picardfp:

[C-unit]

So you bought sleeves assuming that they would have the same design/sizes as your other ones? Sounds like a mutual fail

sounds like you can't read.

[waxball88]

Grammar and punctuation tells me they would sell him sleeves that would replace ones for any sr23. There was no mention of them saying it would replace sleeves that were previously installed or what sleeves they could replace.
Perhaps the op could clarify.

If I told you I would sell you arias pistons to replace your old arias pistons and I sent you std sizes would you be mad I wouldn't know if you were overbore. You would have to say specifically.

If the op had stated that jgy said the sleeves would fit in place of the dartons specifically then yes that is their fault and I would imagine they would have no problem taking a return. But for them to say flat out no when they are at fault seems odd...unless they really are that shitty

[Def]

Grammar and punctuation tells me they would sell him sleeves that would replace/an sr23. There was no mention of them saying it would replace sleeves that were previously installed or what sleeves they could replace.
Perhaps the op could clarify.

Really? You're definitely not the brightest lightbulb in the pack...


From the original post...

so my sr23det needed new sleeves, contacted JGY and they told me that the sleeves they have should fit no problem,


FIRST F'ING LINE

[lazysk8er2]

Im pretty sure 3 out of the 4 people in here so far understand the situation.

Yet one person is trying really really hard to be an asshole for some reason.

OP that sucks, and this isnt the first time ive heard complaints about JGY. Anyway glad you got your money back.

[tqstarburst]

he's not being an asshole, he's being a dumbass.

[waxball88]

Really? You're definitely not the brightest lightbulb in the pack...


From the original post...




FIRST F'ING LINE

... it says jgy said they would fit an sr23 in the line you mentioned no where does it say jgy said it would fit over the darton sleeve. Sorry I was looking for clarification... attacking people on the net makes you feel like a big boy doesn't it.

[ShadowMan]

Either way, the main point to take away from here is that jgy sucks balls. I but a gti-r motor from them, came without tranny, intercooler among a few other items which they said they didnt care when i called to find out why. Then when i called and had a few questions, they were annoyed and told me i would never get it running anyway. Well, with help from friends and jwt i eventually got my g20 running. I speak on behalf of anyone i've ever met who has dealt with them when i say take ur money elsewhere even if its more expensive, you'll save yourself money and headaches down the road.

[s13doc]

This does not sound like you got the wrong part. sounds like when your machine shop took out your darton sleeves they bored over to much since the only difference your seeing is about 1/1000. andrew sounds correct as well if you would have bored the sleeve down to fit the new sleeves (doubling sleeves) you would not have such a large bore. but from the sounds of things you over bored the block taking out the dartons. maybe you should go to a machine shop that can measure things out before you point fingers at parts.

[jholman]

Everything you said is false OP...The machine shop ,if they do any quality work at all, should have waited until they had the sleeves to bore the block anyhow. First off I'm confused on why you would need to resleeve a block that was never run. From what you told me on the phone there was 0 oil pressure because the previous build was shit...I'm sure when Andrew talked to you on the phone he did tell you they would fit because we have one of the largest sleeves on the market, It will accomodate up to an insane 94mm piston if thats what you wanted, that would be a dumb size but it's possible...So if they dont fit your block I would say the machine shop bored the sleeves out too big or your blocks ruined. Even precision machines have an error rate.


When we say that things will fit we assume that they are being installed with knowledge of how to do the work needed.

[quote]Either way, the main point to take away from here is that jgy sucks balls. I but a gti-r motor from them, came without tranny, intercooler among a few other items which they said they didnt care when i called to find out why. Then when i called and had a few questions, they were annoyed and told me i would never get it running anyway. Well, with help from friends and jwt i eventually got my g20 running. I speak on behalf of anyone i've ever met who has dealt with them when i say take ur money elsewhere even if its more expensive, you'll save yourself money and headaches down the road. [quote]

So your upset that you didn't receive an AWD transmission that you couldn't of made work anyhow and an intercooler that also will not function without the proper venting. Neither of those items are advertised to be sold with the motors either. I'm sure you used your factory harness, transmission, and a JWT retuned ecu to get your car running didn't you? And probably bought a front mount kit and the neat thing about all of this...That's what your supposed to do...IDK who you are but I know that that your motor included everything you needed and that if you did call with questions we answered them because that's all my job consists of is tech calls...


The bashing is silly if you order wanting a problem than I guess you get a problem but we have a huge customer base and 85% of it is repeat customers...A lot are even the people that find a stupid way to bash us and still purchase from us...

All of you that feel wronged or neglected feel free to call 276 782 9100 or even stop by 263 Nicks creek Rd, Atkins Va 24311...Ask for Josh I'll be more than happy to answer any questions or handle any concerns...And if you have time to bash us here you certainly have time to call


Josh @ JGY...Hell even feel free to call my cell 276 780 1946

[hashim]

Hey guys, My machine shop didnt over bore the block,the block was not bored at all! they merely removed the old darton sleeve, immediately the difference was the ribs the darton has compared to the straight cylinder the JGY has, so machine shop measured the OD of both sleeves and and again, the dartons were 10 thousandths bigger than the JGY sleeves, they removed one sleeve that was it! anyway nothing else was done to the block, they called me the same say and i called JGY who in turn told them to double sleeve the block with 10 thousandths material left on the old sleeve? uh yeah might as well put foil in between the JGY sleeve and the block and call it good, yeah my engine had low oil pressure,thats why i am in the process of rebuilding it, i called you guys and was given guidance by YOU guys that this sleeve would work however oil pressure and a sleeve fitting loose is directly related to one another.......right got it! you guys were the ones who told me yeah it will fit blah blah blah, i told you guys i already had sleeves and when i called 2 days after receiving the sleeves to inform you it wouldnt work you guys told me i cant return them? what kind of customer service is that? andrew said if he returned the $300 worth of sleeves he'd get fired, really over 300? you guys have some serious issues, with 15% of your customers not returning due to petty things like this, dont worry, i am not the first or last one that will post how crooked you guys are, dueces!

[towlie]

http://zilvia.net/f/reviews-forum/

[S14DB]

http://zilvia.net/f/reviews-forum/

:stupid::lockd: