View Full Version : rotors for s13 with z32 calipers
dethbox
07-31-2011, 07:26 PM
Ok so I pulled some calipers off a z32 in the junk yard. But didn't grab the drum assembly off the back. I plan on just running a hydro setup as an ebrake. But my question is, what rotors can I run for the rears? Again I don't have any of the stock ebrake setup. Thanks guys
brokeAs240sx
08-01-2011, 02:23 AM
you can run z rotors... just drill them to 4 lug if you aren't 5 lug yet. you don't need the ebrake assembly to run the rotors if that's what you're wondering (from the way you worded your post).
dethbox
08-01-2011, 08:25 AM
Ok that's what I was thinking. I figured that you needed the drum assembly to make those rotors work thanks
tommytwo40hands
08-02-2011, 10:57 PM
Nissan 240SX Performance Modification/Brakes - Wikibooks, open books for an open world (http://en.wikibooks.org/wiki/Nissan_240SX_Performance_Modification/Brakes#Stock_brake_spec_and_known_compatible_repla cements)
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.