boost pressure sensor help/ AC help!

[colombianbryan]

alright i swapped in a s14 sr20det into my s14 zenki and for some reason i cant find the boost pressure sensor. i'm running a stock ecu which is the red wc and i looked up the pin out and its at 35 w. its no where to be found. also i got my ac hooked up and everything runs fine except that the small condensor fan right in front of the radiator doesn't start up unless i use some pins to jump it and it runs fine. my ac is still blowing cold but i cant tell if it cuts on when i'm driving since there's no way to look. and when i'm at idles my vacuum is at 19 but when i turn my ac on its vibrates really fast between 15 and 16 and than eventually stables out at 16. i know this is a lot but i've done tons of research and cant find anything. can someone please help!!!

[colombianbryan]

come on someone! please i know someone on here knows or has an idea of the solution

[codyace]

Most wire harness conversions don't even utilize the stock boost pressure sensor, so don't get upset. 16 inches of vacuum is totally good, and makes sense at idle when the car is trying to idle with the load of the compressor clutch being locked in.

[colombianbryan]

yea ive been reading up a lot that most swaps dont have the stock boost pressure sensor.. and yea i talked to a buddy of mine and he said for my vacuum to drop and rise again when i turn off my ac is normal. but i still cant figure out how to get the wiring down for my condenser fan to turn on while my car is on...

[colombianbryan]

i still need help with my compressor fan! still doesnt want to cut on unless i jump the fuses??

[codyace]

i still need help with my compressor fan! still doesnt want to cut on unless i jump the fuses??

Is your triple pressure switch triggering the relay to come on?