PDA

View Full Version : Greddy Manifold Question

xsephish
07-25-2011, 01:00 PM
Just a quick question for those of you running the Greddy or Freddy on s13 SR in an S14 what did you do for your cold pipe? Is there an off the shelf that will work with some tweaks or is everyone just having one fabbed up?
xsephish
07-25-2011, 07:51 PM
bump no one?
cotbu
07-25-2011, 08:02 PM
you're joking right?
fliprayzin240sx
07-25-2011, 08:03 PM
If you have an S13 SR, you already had an S13 FMIC, when you slap the aftermarket intake manifold, you can cut the cold pipe to line up the the new placement of the TB. If you dont have an FMIC yet, get an S14 FMIC. The Greddy/Freddy Intake manifold for the S13 puts the TB roughly in the same position as the S14 SRs.
s14unimog
07-25-2011, 08:05 PM
:picardfp:


msglngth
ultimateirving
07-25-2011, 08:07 PM
I ordered a cold pipe on ebay for like 30 bucks, made to fit freddy. not factory s13 sr. It works perfect. now I just need the hot side to be 1 piece. got quoted to fab one up for 120 here in az.
s13silvia123
07-25-2011, 09:02 PM
you can buy my greddy coldpipe from me but there's a hole in it. and you can weld it up
DinoMan
07-25-2011, 09:09 PM
greddy has a cold pipe made specifically for their manifold.
xsephish
07-26-2011, 06:47 AM
If you have an S13 SR, you already had an S13 FMIC, when you slap the aftermarket intake manifold, you can cut the cold pipe to line up the the new placement of the TB. If you dont have an FMIC yet, get an S14 FMIC. The Greddy/Freddy Intake manifold for the S13 puts the TB roughly in the same position as the S14 SRs.

Thanks thats what I was looking for it looked like it makes it about the same position as the s14 TB I just wasnt sure. I know greddy makes a cold pipe for their manifold but my BOV is on my cold side right near the headlight then there is a coupler and another section of charge pipe going into the TB.
ultimateirving
07-26-2011, 02:31 PM
Thanks thats what I was looking for it looked like it makes it about the same position as the s14 TB I just wasnt sure. I know greddy makes a cold pipe for their manifold but my BOV is on my cold side right near the headlight then there is a coupler and another section of charge pipe going into the TB.

either gonna have to move ur bov, or get the 1piece pipe and weld in the bov.