Dutch 2JZ S14 swap project

[rijndenn]

Hi im Dennis from the netherlands, im sorry for my bad English but its not my first language.
I own a s14 from 1995, and i bought the car 7 years ago. The car had some changes in the couple of years see the pics below

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/199613_108554829225834_100002139528285_84760_58974 0_n.jpg

http://www.sr4000.com/sothumb/640/0/709/1195503419-4-709.jpg
in holland we can order a mcburnout.

http://pics.sr4000.com/picsbig/1143062542-709/Nissan-Silvia_s14--185485.jpg


http://www.sr4000.com/sothumb/640/0/709/1195504302-4-709.jpg

http://www.sr4000.com/sothumb/640/0/709/1195503419-9-709.jpg

http://www.sr4000.com/sothumb/640/0/709/1195503419-8-709.jpg

http://www.sr4000.com/sothumb/640/0/709/1195503419-3-709.jpg

http://www.sr4000.com/sothumb/640/0/709/1195502363--709.jpg

http://www.sr4000.com/sothumb/640/0/709/1195504302-2-709.jpg

I had some fun these years with racing and drifting, but i got some problems with the sr20 (at that time +-320bhp)
I bought a lexus gs300 with a 2jz swap and fell in love with the 3L twin turbo. so much power an torque.

So i was making some plans with Niels en Rick (they build also the car of joes)
(see his topic http://zilvia.net/f/chat/345784-nissan-200sx-s14-5-1995-widebody.html)

and make a new fresh build car from the bottom up. With a serious safty cage and custom made wheel tubs, so we can make a backwards entree in drifting :drool:

[rijndenn]

So i bought a 2jz-gte with a getrag v160 gearbox, the engine is a japspec engine complete stock with upgraded clutch. Got also a Holset hx40 turbo that is running at 1.5 bar a +- 700hp on a 2jz, but for troubleshooting we choose the stock twins first :D

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/199348_104067253007925_100002139528285_38186_46324 84_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/195863_108448992569751_100002139528285_83224_86156 6_n.jpg
A front sump is needed to clear the front crossmember.

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/225737_118362571578393_100002139528285_156452_6691 670_n.jpg
so let the project begin... stripping.... sr20det out bye bye bye

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/231116_119840388097278_100002139528285_165531_1023 672_n.jpg
alot of parts on the ground... it's must all be emty for the cage.

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/248430_122984481116202_100002139528285_186121_1321 328_n.jpg
a very nice part comming in. the engine mounts for the 2jz :D

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/250557_126033980811252_100002139528285_205699_5658 739_n.jpg
lets test fit the engine mounts

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/254065_126034287477888_100002139528285_205708_7721 048_n.jpg
suceeded! porn!

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/248870_127594607321856_100002139528285_215462_5701 897_n.jpg
Now its time to go the builder of the safty cage.

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/254893_127594630655187_100002139528285_215463_5408 738_n.jpg
sketch of the cage.

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/264729_132802726801044_100002139528285_239680_3920 128_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/261729_132802763467707_100002139528285_239681_3973 033_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/262124_132802796801037_100002139528285_239682_4835 233_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/269739_132802860134364_100002139528285_239684_7745 834_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/269859_132802913467692_100002139528285_239686_7451 343_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/267859_132803013467682_100002139528285_239688_5156 91_n.jpg

[rijndenn]

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/267487_134664273281556_100002139528285_245559_5755 925_n.jpg
now their making the wheel tubs for more steering angle, the car is standing on all the driftworks handling parst. Inclusive the hub knuckels.

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/262175_134664296614887_100002139528285_245560_4832 293_n.jpg
cut it

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/265161_134664389948211_100002139528285_245562_4107 067_n.jpg
new oem steel :D

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/268252_134664489948201_100002139528285_245564_3566 569_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/263861_134664616614855_100002139528285_245566_3781 077_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/270738_137811922966791_100002139528285_254596_4022 767_n.jpg
nice work!

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/283307_137812259633424_100002139528285_254597_5051 261_n.jpg

[rijndenn]

today we make the other side....

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/206051_141269669287683_100002139528285_265976_4773 822_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/262453_141269902620993_100002139528285_265977_6040 512_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/251757_141270099287640_100002139528285_265979_3308 244_n.jpg

[bb4_96]

Well done sir. Is that an S15 sr you pulled?

[turbo2nr]

nice build so far

[RB180sxChris]

Nice build soo far

[pandaroo]

lookin good! im interested how the hx40 will perform on the 2j as im thinking about slapping one on mine myself. any idea were it would spool at?

[jontron5000]

Hi im Dennis from the netherlands, im sorry for my bad English but its not my first language.
I own a s14 from 1995, and i bought the car 7 years ago. The car had some changes in the couple of years see the pics below

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/199613_108554829225834_100002139528285_84760_58974 0_n.jpg


Whoa, I've never seen a 240sx with that color red. Anyone know what its called or the color code?

Keep up the good work!

[cured13]

:coold:love Dutch projects

[blingbling]

^right? The ones I see are always of the best quality

[miggypq21]

What kind of tow vehicle are you using?

So weird seeing a car tow a trailer and another car lol

[JOeS]

What kind of tow vehicle are you using?

It's a Citroën C5.

[Imarvin240]

great job so far!

[acain]

Looking good so far!!!

Not sure if you know but a tip i learned the hard was on my 2j swap!



If you use non turbo 2jz-ge oil filter housing and 2jz-ge water pump outlet pipe it cleans alot of the stuff up around the block that you dont need! Made my bay look alot cleaner!

Good luck with the swap!

[S14Driftr91]

those tubs came out gorgeous !

[rijndenn]

Well done sir. Is that an S15 sr you pulled?

thanks :D the credits of this project going to rick and niels.
:D that looks olmost JDM :o

[rijndenn]

Looking good so far!!!

Not sure if you know but a tip i learned the hard was on my 2j swap!



If you use non turbo 2jz-ge oil filter housing and 2jz-ge water pump outlet pipe it cleans alot of the stuff up around the block that you dont need! Made my bay look alot cleaner!

Good luck with the swap!

thanks for the tip! we keep that in mind.
:drool:

[rijndenn]

What kind of tow vehicle are you using?

So weird seeing a car tow a trailer and another car lol

like Joed sad , a citroen C5 diesel, but it's that not common sight in your country?
over here we see it all the time....

[rijndenn]

Whoa, I've never seen a 240sx with that color red. Anyone know what its called or the color code?

Keep up the good work!

That one model looked really fierce! haha

the color called Rosso red, and the roof is subaru black.

all the body parts at this time is grey, but we paint it the same rosso color in red when its finisht.

[T chop]

like Joed sad , a citroen C5 diesel, but it's that not common sight in your country?
over here we see it all the time....

Have a thing called trucks and SUV's

And a lot of the trailers in North American are steel and heavy enough to carry equipment, most of the EU trailers I see in pictures are lightweight aluminum car trailers.

Here's an example when I had to deliver a 180 shell
http://i161.photobucket.com/albums/t225/Van240/IMG_0035.jpg

[rijndenn]

lookin good! im interested how the hx40 will perform on the 2j as im thinking about slapping one on mine myself. any idea were it would spool at?
ps thanks for posting the titays!

i have this turbo driven on a rb26 with a 2.8 stroker kit, and it spooled around 4500rpm....... so on a 3 liter i think like 4200its begins....?!

[rijndenn]

Have a thing called trucks and SUV's

And a lot of the trailers in North American are steel and heavy enough to carry equipment, most of the EU trailers I see in pictures are lightweight aluminum car trailers.

Here's an example when I had to deliver a 180 shell
http://i161.photobucket.com/albums/t225/Van240/IMG_0035.jpg

mmm oke i see,
that kind of trucks are in the netherland really expensive in tax(i know its a shame), so you do'nt see them often. and over here you need a special drivers licente to drive with a trailer.

[T chop]

Pulling a car with a car is cool, but I wouldn't be confident in the power or braking. In that truck I pulled my car (different car) with that trailer uphill doing 160 km/h without trying too hard. Pretty impressive considering it's a completely stock truck and an econobox car would have troubles doing that speed up the hill, obviously without pulling anything.

But anyway, back to your build, I will deff be following it.

[HS13KLS]

More pictures.


hahah looks sweet man!

[rijndenn]

today the guys working 1.8 bar, credits :) i wish i could make that.

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/252081_144160488998601_100002139528285_275418_5390 913_n.jpg
made a style dimpledais (spelled wrong i know)

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/282038_144160525665264_100002139528285_275419_3201 594_n.jpg
cut off the rear fender

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/188316_144160542331929_100002139528285_275420_5626 912_n.jpg
it needs more low!

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/254783_144160562331927_100002139528285_275421_4568 077_n.jpg
some weight took off :D

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/225696_144160585665258_100002139528285_275422_7229 079_n.jpg
wow that looks nice

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/185518_144160615665255_100002139528285_275423_6828 446_n.jpg
test fit the chargespeed 50mm rear wide fender

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/185239_144160638998586_100002139528285_275424_5679 381_n.jpg

[rijndenn]

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/s720x720/223131_147558655325451_100002139528285_287100_5929 856_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/s720x720/249334_147558681992115_100002139528285_287101_3053 572_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/s720x720/229600_147558751992108_100002139528285_287103_4370 977_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/s720x720/229756_147558765325440_100002139528285_287104_6203 486_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/s720x720/284202_147558785325438_100002139528285_287105_3752 729_n.jpg

[DanielS14]

could you post a couple more pics of that chargespeed over, they look good!!

[project_silvia]

Dope build bro keep it up

[[email protected]]

Shit is gonna be great, love the welding work and design of your tubs.