rickrolling
06-14-2011, 03:15 PM
Okay, I'm new to the S chassis as well as to sr20det's, and I need some help. I had a stuck injector replaced it. while replacing it I removed the injectors from the engine but still attached to the fuel rail, all sprayed like injectors should. Checked all coil packs to make sure they were sparking the plugs, put a few drops of oil in the cylinders to help the rings in case of rings not sealing due to washed cylinder walls(some gas had sat in engine for a couple of days while waiting on injectors bad idea i know), and i got it to start. let it idle once it could after clearing old fuel, oil, gremlins? and now it wont idle. it seems to run fine but just dies.
It is a stock sr, freshly rebuilt and ran great until the injector issue. now im boggled as i dont know what could be causing this. I am also aware that i should/will be changing the oil as well because of fuel being in it im sure. bov is routed back in which helped with the low rpm stall, but i feel that this is beyond that.
Any help would greatly be appreciated. I have tried searching but will admit i am a retard when it comes to the internet, searching, and forums...sorry.
*fixed* thanks
It is a stock sr, freshly rebuilt and ran great until the injector issue. now im boggled as i dont know what could be causing this. I am also aware that i should/will be changing the oil as well because of fuel being in it im sure. bov is routed back in which helped with the low rpm stall, but i feel that this is beyond that.
Any help would greatly be appreciated. I have tried searching but will admit i am a retard when it comes to the internet, searching, and forums...sorry.
*fixed* thanks