PDA

View Full Version : S13 with a ka24de starting issues ??


lrb99
04-06-2011, 07:32 PM
The problem happened after I took my Viper remote starter out (didn't put it in).I rewired it back the way it should be (color matched) anyway now when I push the clutch in my car starts by the clutch peddle ? and after it's started when I push the clutch in the starter activates and I have to turn the key to shut it off . It's the wires that are wired to the ignition it's right under the steering column there were a black/red striped and a black/ white striped and blue and black/yellow striped ( the wires to the ignition) I unwired the black/white striped splice that was there and when I push the clutch in it stops activating the starter but can't start it off the key like that . I can wire but troubleshooting it I'm not the best . If you know what this is and could be please educate me would be great and much appreciated. Thanks ps, my ignition is blown out and I have to start with a broken key. Nice and ghetto

lrb99
04-09-2011, 06:21 AM
Crazy shit my friend told me to check the fsm and to run new wires?

lrb99
04-11-2011, 08:45 PM
I think my answer is to run new wires

Mishkin_707
04-13-2011, 05:02 PM
might want to check the wiring to the starter, there are two from what i read when i installed my alarm, cant remember the colors i think they are yellow and black, it's called the starter 2 wire, did it have remote start? what was the reason of taking the alarm out?

lrb99
04-13-2011, 09:31 PM
Yes the alarm was already installed when I bought the car. The reason behind taking it out is I broke the remote and it just didn't work right my cAr would start for a second then shut off and keep trying to start itself. The instrumental lights would blink continuously . So I took it out and wired it all backup then this happened I'll check thanks for the help this kinda stumped me .