Sikky this Sikky that

[Lustgarage.com]

Lust Garage now offers Sikky LS swap kits and parts for your S chassis, 350Z, or your G35!
Get a FREE t-shirt with any purchase over $200!!!!!

http://www.lustgarage.com/mountGallery1Lrg%20copy.jpg

S13 and S14 LS1 Swap Kit $1,750-$1,950 shipped!

Kit Includes:

Aluminum Race Oil Pan V3

7 quart high capacity design
6061 CNC machined flanges from 1/2" material retaining OEM like structural rigidity. (not flimsy like other aftermarket pans)
Rear flange at bell housing allows install of factory dust shields
Baffle and trap doors to prevent oil starvation
New OEM oil pan gasket
Custom Oil pickup assembly


Remote mount filter Kit


8 AN fittings (2) and stainless braided lines (2)
Remote oil filter base
High quality oil filter
All fittings and hardware

Engine Mounts & Transmission Mounts

CAD/CAM designed CNC machined solid 6061 T-6 aluminum mounts
Custom Urethane Bushings with true isolation
High Grade Hardware Kit
Proper Engine Placement and Axle Alignment
Lifetime Warranty on engine mounts

Trans Mount

CAD/CAM designed
CNC bent steel mount bracket
Urethane bushing
High Grade Hardware kit
Designed for use with the T56 transmission
Lifetime Warranty on transmission mount
Driveshaft

Steel One Piece Driveshaft with high strength 1310 U-joints
Designed for use with the T56 transmission


Optional Upgrades

Aluminum Driveshaft +$200
Solid Aluminum Mounts +$70


_______________________________________________


350Z/G35 LS1 Mount Kit $2,250 shipped!

Kit Includes:

Aluminum Race Oil Pan

8 quart high capacity design
6061 CNC machined flanges
Baffle and trap doors to prevent oil starvation
New OEM oil pan gasket
Oil pickup

Remote mount filter Kit

8 AN fittings (2) and stainless braided lines (2)
Remote oil filter base
High quality oil filter
All fittings and hardware

Engine Mounts & Transmission Mounts

CAD/CAM designed CNC machined solid 6061 T-6 aluminum mounts
Urethane Bushings
High Grade Hardware Kit
Proper Engine Placement and Axle Alignment
Lifetime Warranty on engine mounts

Trans Mount

CAD/CAM designed
Steel mount bracket
Urethane bushing
High Grade Hardware kit
Designed for use with the T56 transmission
Lifetime Warranty on transmission mount

Billet Short Shifter

6061 Aluminum Shifter plate
T304 Stainless steel shifter
Designed for use on the T56 transmission

Driveshaft

Aluminum One Piece Driveshaft with high strength 1310 U-joints
Drive shaft length is set up for use with a T56 transmission


Optional Upgrades

Solid Aluminum Mounts +$70


_________________________________________


Full Line of Sikky Swap Headers Available!

http://www.lustgarage.com/sikky-s13s14-ls1-178-header-cc%20copy.jpg

LS1 S13/S14 1 3/4" Header $650.00

Uncoated mild steel 1 3/4" primaries with 3" collector

LS1 S13/S14 1 3/4" Header coated $945

Aluminum coated mild steel with S.S. V-band female flange 1 3/4" primaries with 3" collector

LS1 S13/S14 1 7/8" Header $695

Uncoated mild steel 1 7/8" primaries with 3.5" collector

LS1 S13/S14 1 7/8" Header coated $995

Aluminum coated mild steel with S.S. V-band female flange 1 7/8" primaries with 3.5" collector

LS1 S13/S14 1 3/4" Header Right Hand Drive $650

Uncoated mild steel for RHD vehicles - 1 3/4" primaries with 3" collector

LS1 S13/S14 1 3/4" Header coated Right Hand Drive $945

Aluminum coated mild steel with S.S. V-band female flange for RHD vehicles 1 3/4" primaries w/ 3" col.

LS1 S13/S14 1 7/8" Header Right Hand drive $695

Uncoated mild steel for RHD vehicles - 1 7/8" primaries with 3.5" collector

LS1 S13/S14 1 7/8" Header coated Right hand drive $995

Aluminum coated mild steel with S.S. V-band female flange for RHD vehicles 1 7/8" primaries w/ 3.5" col.

__________________________________________________

http://www.lustgarage.com/S13-Sway_Bar%20copy.jpg

Front Sway Bar for S Chassis

S13 Front Sway Bar $279.99 shipped!

32mm solid steel sway bar for S13 240sx JDM/USDM swapped engine

S14 Front Sway Bar $279.99 shipped!

32mm solid steel sway bar for S14 240sx JDM/USDM swapped engine


_________________________________________________

Oil Filter Relocation kit $200 shipped!

Oil filter relocation kit for LS1 into S13/S14 240sx


LS1 S13/S14 Power Steering Line $135 shipped!

Power Steering line for LS1 into S13/ S14 240sx


S13 / 14 Master Cylinder conversion kit $250 shipped!

Sikky MC adapter plate
Sikky Clutch bleeder fitting and line
Wilwood performance master cylinder
All lines and miscellaneous fittings

[godrifttoday]

do u have any pictures of an ls swaped on a s13?

[dudermagee]

Best price for S14 front sway bar shipped to 06082 please

[Lustgarage.com]

do u have any pictures of an ls swaped on a s13?

One of the best looking swaps I've seen and he did use the Sikky kit

http://www.lustgarage.com/Screen%20shot%202011-04-06%20at%207.57.43%20PM.png

[Lustgarage.com]

Best price for S14 front sway bar shipped to 06082 please

PM sent! Thanks!

[roboticnissan]

Where are the brake mc on that s13 more info.please.

[Lustgarage.com]

Where are the brake mc on that s13 more info.please.

I believe he is using the wilwood brake kit similar to this:


http://image.popularhotrodding.com/f/tech/pedals/34566927/wilwood-pedals.jpg

[godrifttoday]

would their be any fabrication needed once installed? so direct bolt on?

[Lustgarage.com]

would their be any fabrication needed once installed? so direct bolt on?

There is some fabrication needed with just about any non-stock motor swap Sikky does have a "Write-Up" (http://www.sikky.com/images/pdf/1250256145S13-S14%20Mounting%20Instructions.pdf) that you can look at to get some sort of idea.

[Lustgarage.com]

Formula D Season starts today, get pumped!

[NismoPlsr]

Price on s13 front sway bar shipped to 06010? Thanks

[Lustgarage.com]

Price on s13 front sway bar shipped to 06010? Thanks

PM Sent!!!!!

[aalbert240]

so wats in the pic is all you need to make an ls1 work in a s13?

[Lustgarage.com]

so wats in the pic is all you need to make an ls1 work in a s13?

You will still need swap headers, a wiring harness (Sikky offers a custom harness service), and some other things. I can get you an exact parts list if you would like one.

[surge s14]

im thinking to switch to the cleaner look with the sikky ill hit you up soon

[Lustgarage.com]

im thinking to switch to the cleaner look with the sikky ill hit you up soon

Sounds good man, just let one of us know and we'll get you taken care of

[devilzdriver]

You will still need swap headers, a wiring harness (Sikky offers a custom harness service), and some other things. I can get you an exact parts list if you would like one.

could i get a list pm'ed to me? When i get back from deployment i wana do the ls1 to my 240....

[Lustgarage.com]

could i get a list pm'ed to me? When i get back from deployment i wana do the ls1 to my 240....

I'll get a list put together for you

[Shmex]

Hey Lust, same here. Can you pm me a list? thanks.

[Lustgarage.com]

Hey Lust, same here. Can you pm me a list? thanks.

will do, thanks guys

[thenooblet]

the only major modifications are trimming the windage tray and hammering the trans tunnel a little...its not any major cutting or anything

[Lustgarage.com]

Orders went out today! Get your swap kick-started and get those parts ordered today!

[khmer1]

might be a long shot but do yah guys do toyota engine swaps mounts

[Lustgarage.com]

might be a long shot but do yah guys do toyota engine swaps mounts

looking to do a JZ swap? I can look into it for you

[nisco]

looking to do a JZ swap? I can look into it for you

I might be interested as well. 1JZ into S13
Thanks

[Lustgarage.com]

I might be interested as well. 1JZ into S13
Thanks

I'll start getting some info together on the swap this week then

[Lustgarage.com]

Get a FREE t-shirt with any purchase over $200!!!!!

[TheRookie]

Need a list pmd for everything on lhd s14 and also a rhd s14