PDA

View Full Version : ka24de firing issues


KA24sleeper
03-21-2011, 12:54 AM
Couple of days ago i had no power in my cyl 1#, thought it was my wires, changed them and still the same thing i checked the plug nothing, cheked the pistion to see if it was damaged and was fine. Then i changed out the distributor and still no fire in cyl 1#. So i took off my fuel rail and swapped it out with my friends ka and it worked, idle was fine, no mis and i thought was fixed but after button up everything back together it now did not fire in cyl 2&3. I checked spark and was good, checked plugs and were good, changed ingitor chips and still no go in cyl2&3. Did a compression test and pased with flying colors and checked the injectors and they all fired. But it threw a code 13 which was temp sensor for the ecu, changed that out for new one and still no change. Even changed ecu's and still no fire in cyl 2&3. So im stumped i cant figure it out why its not firing correctly

KA24sleeper
03-21-2011, 05:00 PM
any one? really stumped, dont know if its my acv or something else, just checked my injectors and they all fire so its not my fuel rail or injectors