No spark think is the ignitor chip heeeellllpppp

[Ariel305]

My sr was working perfectly i tried to install a safc2 and unpluged the harness from the ecu to do it when i pluged it back in the engine doesnt want to start i checked my fuel gauge and it has fuel but no spark on none of the four cylinders just like that i think its the ignitor chip what do you guys think is it the ignitor or something else plsssss help me i dont want to waste money on something i dont need

[LayNLow]

It sounds like you didnt wire it up correctly. Go re check your wiring first.

[Ariel305]

No i took it off just in case and still dosent start it cranks perfectly but no spark

[lazysk8er2]

check your fuses even the main relay also...

then since u unclipped your harness sometimes the wires come out of the ecu plug (it is 20 years old)...

check to see if you didnt fry your ecu...also check that you properly ground the ecu

check to see if there is power before and after the ignitor chip

[Ariel305]

I think i fried my ecu cuz i tried cheking for codes and the light doesnt comes on and i unpluged the harness from the ecu and cranked it and it didnt make any diference.

Also i checked the ignitor, egi relays, all of the fuses and they have continuati or how ever u write that. So i guess is the ecu that got fried whend installed the z32 maf wrong. Thanks what do u think?