PDA

View Full Version : wiring diagram for starter or if you know the answer lmk(ive searched)

562s13
02-09-2011, 06:15 PM
the female wire that goes to the starter was cut and was in between the battery and fender in some tape. i have searched the fsm and cant find a damn thing on where its suppose to be connected. and also the plug thats on the starter is just hanging and i also dont know where it goes can someone plz help me out. its out of a 89 ka24e.
562s13
02-09-2011, 09:39 PM
someone plz help me out
godrifttoday
02-10-2011, 03:51 AM
Why don't u type 240sx fsm nico. On goggle
MisawaJason
02-10-2011, 04:56 AM
You didn't search the FSM enough. The answer is in there
bb4_96
02-10-2011, 05:54 AM
http://i949.photobucket.com/albums/ad335/jimril_22/starting.jpg

goes to the lower harness plug
562s13
02-10-2011, 12:38 PM
thank you good sir and i didnt find that picture in the fsm. i searched a lot. thanks for the help
1sttime240driver
02-13-2011, 05:14 PM
Im new to the 240 scene and i need some help with my swap. I put a 96 ka24de into an 89 s13. Im using the 96 harness and ecu but the problem im having is that i have 5 'extra' plugs that are leading towards the fuse box on the passenger side in the engine bay. The plugs on the harness and fuse box are both female connectors. I guess my question is what do i have to do to modify the 96 harness to fit in the 89 chassis. I know i have to modify the sub harness also but i dont exactly know what to madify. And help would be much appreciated. Thanks.