S13 Sr into S14 wiring ?s

[kaking]

Ive looked at many diagrams and others threads and im still lost. Maybe im just not meant to play with wires ;-(..Im trying to finish my s13 SR swap into a s14 and im having a little trouble with figuring out where a couple plugs go. The harness i bought from a guy on here that said it worked perfect for his same swap. Would ask him but i accidentally deleted the message from my inbox. Any help/or other suggestions would be great

Here are the plugs in question:
This one is inside the engine bay(back left corner) but its long enough that it could belong inside the car???
http://img651.imageshack.us/img651/5377/photo1086.jpg
By kaking (http://profile.imageshack.us/user/kaking) at 2010-10-25

This blue plug is near the ECU but i do not see where it plugs in
http://img294.imageshack.us/img294/1373/photo1088c.jpg
By kaking (http://profile.imageshack.us/user/kaking) at 2010-10-25

This plug comes out next to the maf plug
http://img188.imageshack.us/img188/6127/purpblkbymaf.jpg
By kaking (http://profile.imageshack.us/user/kaking) at 2010-10-25

And this plug is near the intake manifold
http://img651.imageshack.us/img651/1102/photo1212.jpg
By kaking (http://profile.imageshack.us/user/kaking) at 2010-10-25

[WESamiss]

find a torrent of the drifting.com dvd? tried it yet? I have the s13 chassis dvd, very good.
But i posted in here to ask you a question rather then start a new thread... but have you messed with your F4 plug yet? and if not can you take a picture of the stock wire placement in the plug?
Sorry I am not much help.

a quick search using google, turned this up.
Simone : My 1996 240sx: Converting an S13 SR20 Redtop Harness to fit a 1996 240sx (http://om1kron.blogspot.com/2008/12/converting-s13-sr20-redtop-harness-to.html)

be sure and solder everything and shrink wrap it dude. and use shielded wire where its needed.

[Om1kron]

Ive looked at many diagrams and others threads and im still lost. Maybe im just not meant to play with wires ;-(..Im trying to finish my s13 SR swap into a s14 and im having a little trouble with figuring out where a couple plugs go. The harness i bought from a guy on here that said it worked perfect for his same swap. Would ask him but i accidentally deleted the message from my inbox. Any help/or other suggestions would be great

Here are the plugs in question:
This one is inside the engine bay(back left corner) but its long enough that it could belong inside the car???
http://img651.imageshack.us/img651/5377/photo1086.jpg
By kaking (http://profile.imageshack.us/user/kaking) at 2010-10-25

Need a better picture to see where it's coming from, I doubt that's the gauge cluster plug, could be emissions related.


This blue plug is near the ECU but i do not see where it plugs in
http://img294.imageshack.us/img294/1373/photo1088c.jpg
By kaking (http://profile.imageshack.us/user/kaking) at 2010-10-25
There is a blue relay next to the ECU that's where it plugs in. That is the ECCS relay.


This plug comes out next to the maf plug
http://img188.imageshack.us/img188/6127/purpblkbymaf.jpg
By kaking (http://profile.imageshack.us/user/kaking) at 2010-10-25
This would or should be your 02 sensor plug if it's by the MAF.

And this plug is near the intake manifold
http://img651.imageshack.us/img651/1102/photo1212.jpg
By kaking (http://profile.imageshack.us/user/kaking) at 2010-10-25[/quote]

If this is from the upper engine harness :
This either goes into your wiper motor you may have a different model wiper motor which uses a boxier connector (95-96 models) I believe that's the wiper plug for the newer 97 models.

If this is from the lower engine harness :
But because that plug is grey I think that is actually your lower harness plug that handles your 5th gear position sensor, speed sensor, reverse light, and oil pressure sender.

[kaking]

But i posted in here to ask you a question rather then start a new thread... but have you messed with your F4 plug yet? and if not can you take a picture of the stock wire placement in the plug?

be sure and solder everything and shrink wrap it dude. and use shielded wire where its needed.

My harness was already re wired so i didnt mess with anything

[kaking]

Thanks Om1kron this info is very helpful.

Ill ill take another look and find out exactly where that plug in the first pick is coming from then get back to you.

My O2 sensor is already plugged in so im still confused on the plug you said should be my O2 sensor.

[WESamiss]

ok thanks.

[kaking]

Need a better picture to see where it's coming from, I doubt that's the gauge cluster plug, could be emissions related.
HERES ANOTHER PIC THAT I JUST TOOK. THE PLUG COMES OUT RIGHT NEXT TO WHAT I BELIEVE IS THE WIPER MOTOR

http://img249.imageshack.us/img249/5227/photo1245e.jpg
By kaking (http://profile.imageshack.us/user/kaking) at 2010-11-04

This would or should be your 02 sensor plug if it's by the MAF.
STILL LOST ON THIS ONE BECAUSE THE 02 SENSOR IS ALREADY PLUGGED IN.


If this is from the lower engine harness :
But because that plug is grey I think that is actually your lower harness plug that handles your 5th gear position sensor, speed sensor, reverse light, and oil pressure sender.[/QUOTE]
I JUST LOOKED AND YOU ARE CORRECT, ITS COMING FROM THE LOWER HARNESS. BUT I SEE NO PLACE FOR IT TO BE PLUGGED IN