RB30 series II's GODZIRRAAAA!!!!

[holemilk00]

Do you feel inadequate? Sometimes feel like your <500whp car just isn't enough anymore? Well then do I have the cure you, step right up and take a look at this deal:

RB30 Series II Short Blocks ZOZMZGZ

I've realized I don't have the room for three of these and I have one for myself, so here are the extra two for sale. As you can see they have all the accessories on them and all the brackets. Nothing is bent and everything is clean, these are not rust bucket motors like a lot of the ones you see for sale. These are for the base of the mother of all RB builds.

I'd love to have them picked up but I'd be willing to ship if you're willing to pay, I have a pallet and a forklift so it could go freight which will be cheaper.

I will deliver within a reasonable distance for the cost of gas, I will provide receipts and you will be buying me McDonald's before I drive back home.


These things are one hell of a wait from Australia and shipping/import tax/customs usually runs over a grand so I'm going to say I need to at least get my money back out of it.

PM me here I'm here everyday
I take paypal


$1100+shipping

Sorry for the indoor pics but they are all I have for now. If you've seen these things for sale before you know that these are amazingly rust free and clean.
http://img.photobucket.com/albums/v228/holemilk00/Car/DSC04819.jpg

http://img.photobucket.com/albums/v228/holemilk00/Car/DSC04817.jpg

Even the dip stick is in great condition
http://img.photobucket.com/albums/v228/holemilk00/Car/DSC04818.jpg

http://img.photobucket.com/albums/v228/holemilk00/DSC04820.jpg

http://img.photobucket.com/albums/v228/holemilk00/DSC04821.jpg

A/C compressor
http://img.photobucket.com/albums/v228/holemilk00/DSC04822.jpg

http://img.photobucket.com/albums/v228/holemilk00/DSC04824.jpg

http://img.photobucket.com/albums/v228/holemilk00/DSC04825.jpg

Common questions about these are:

Q: Will a RB26 head bolt right to these?
A: Yes after you have the head stud holes in the block machined from 12mm to 14mm they will bolt right up.

Q: Will a RB25 head bolt right to these?
A: No, the above machining has to be done and there are some water jackets that need to be enlarged (this doesn't "HAVE" to be done for it to work, but it is advised)

Q: Will a RB25 neo head bolt right to these?
A: Yes.

Q: How much should the machining cost to get my RB26/25 head to work?
A: I've had two blocks done for each head in the past, never paid over $200 from a VERY reputable shop.

Q: How much is shipping?
A: Usually to a business address anywhere from $200-$400 depending on the distance, a little more for a residential address. (If you know of a cheaper way I will be more than happy to do whatever it takes to use it)

Q: How much do you eat at McDonald's?
A: About $6 bucks

Q: Do you have a head that you will sell with these:
A: Yes I have a R33 GTR RB26 head I will sell with one of them, complete, PM me for details.

Any other questions should be posted in here so I can answer them in open forum in case anyone else has the same question.


Alright guys, Its OBO on these, and I'm open to trades, trades + cash, and other bargaining tactics.

Things I need, S13 silvia front end whole or parts, S14 kouki front parts, SR parts, S13 suspension (no megan or comparable, sorry guys just not my thing) and a whole host of other things just try me out.

[josephin510]

Very interesting motor Glws

[confuzed240]

Wow guy here in NC sells these all day for $300-400 bucks. Don't know the condition but yours look pretty good.

[holemilk00]

Being from NC, and the fact that when I bought these I lived in NC, I highly doubt good RB30 blocks sell for $300-400 each. I have the freight bill for over $2000 for four blocks. That's not including buying the blocks, or paying the other fees involved. Think about it, it cost $300 to ship a block coast to coast, do you really think it cost less than that to ship it around the world? Just search RB30 on this site and see what these sell for. And I've also searched CN for these and they don't come up on there either. The cheapest these blocks can be had online is about $600 completely stripped and rusted out.

[Buriantsu]

I would be interested but I don't have money for McDonalds...

[holemilk00]

I am actually driving to Miami/south Florida on December 15th. So we could definitely work something out for cheap on shipping cost since I'm going that way anyhow. This goes for anyone else along my route down there throughout Charlotte NC (to see my mom) or Wilmington (to see friends). That can be worked out to save any of you money on shipping.

[Envy]

Great looking blocks! $1,100 for legit RB30 shortblocks!


....$300 for RB30's would just be a block. No pistons, crank, rods, oil pan, accessories... etc etc.

[confuzed240]

Ah yes my mistake. He was selling bare blocks only. Not hating your thread, love the RB30!!! GLWS!

[CamryOnBronze]

Vouch for this seller- Shane is a stand up guy and has some TOP NOTCH parts. Just a good guy all around- don't hesitate to hit him up!

[copermn]

Dude if I hadn't bought my rb20 couple months ago, I'd definitely buy this! GLWS man!!

[P-Funk alot]

see its people like you that make it hard for people like me to prioritize in life. i might just be saying good bye to my vk56 setup and get back into an rb powered car man oh man choices....

[Magical Trevor]

I've seen both these blocks in person, and where they're stored. Shane is a legit seller with a LOT of super JDM... in this case ADM parts. Buy with confidence people!

[BoostinIX]

Free bump for a pimp block

[GRNxS14]

How much power are the stock internals good for? Im assuming these blocks would have to be built. Man if I didnt have a bunch of stuff to buy still to finnish up my s14 Id jump on this instantly. Killer deal so bump for you! Already imported RB30 blocks usually sell close to $1500 without the mounts, p/s and a/c pumps, oil pan, and flywheel.

[Magical Trevor]

I know R.I.P.S. in New Zealand has proven ~600whp on stock internals.

[holemilk00]

How much power are the stock internals good for? Im assuming these blocks would have to be built. Man if I didnt have a bunch of stuff to buy still to finnish up my s14 Id jump on this instantly. Killer deal so bump for you! Already imported RB30 blocks usually sell close to $1500 without the mounts, p/s and a/c pumps, oil pan, and flywheel.


Sorry I should have answered this in the original post. If you go on Skylinesaustralia.com you can see where people have made 600 and up on the stock lower end. With that said, these blocks are suited for rebuild, meaning that they are simply used blocks, without any failure. So a stock rebuild would be recommended at the bare minimum. The stock parts obviously can be had a lot cheaper than say spool rods and forged pistons.


Like stated above, its rare to find these with all the accessories and brackets undamaged and this is a killer price. I'm getting a LOT of interest on these because of the price. Unlike a lot of other blocks listed online I'm not trying to make a couple hundred dollars per block, I'm just trying to get my money back. Someone jump on this deal fast, as I have 3-4 seriously interested parties at the moment.

[Racinjitter]

Awesome deal for stupid clean rb30's. +1 to Shane being stand up!

[holemilk00]

Alright I have a deposit on one block pending pick up. The other one is still for sale. I wanted to add that I have a brand new set of McKinney motor and trans mounts along with the steel driveshaft for sale too if anyone needs them with the block we can cut a deal. I also have lots and lots of other RB swap stuff, I had this stuff pieced together to do a swap but I've gone LS2 instead.

[holemilk00]

Lets bump this up for the local buyer backing out on one block. This means both are still avaliable, I have a R33 RB26DETT head complete and clean that I can work into a deal if someone is looking for a long block set up to build a beast from. Lets get these things sold.

[Racinjitter]

Dork that backed out is a dork. He doesn't know what he is missing!

[Buriantsu]

You never got back to me on pricing for the RB head on the 30 block.

[holemilk00]

You never got back to me on pricing for the RB head on the 30 block.
Hey man,

I found the PM in my sent box, don't know why you wouldn't have gotten it but I sent it again. Keep me posted.

[holemilk00]

Alright, since the holidays are almost over and I'll be back home in a few days. Lets get some serious buyers interested in these things. Like I said I have a RB26 head minus the cams also, a McKinney motor and trans mount set brand new, and a McKinney steel driveshaft that are all also for sale.

[holemilk00]

Is anyone out there? Bueler? Bueler?

[Syncade]

Free bump for you.

[gunmetalr32]

Ughhhh. I just bought a 3rd gen 3sgte for my deuce... I would of been all over this..

[nismoninjagtr]

if i knew how to tune an rb30 i would try to buy this block instead of aiming for that good ol' 2.6l

[jr_ss]

if i knew how to tune an rb30 i would try to buy this block instead of aiming for that good ol' 2.6l

That's a pretty stupid statement. Why would it be any different than tuning any other motor?

[Racinjitter]

Agreed. That statement makes no sense at all.

[bardabe]

why are you not not in socal? =(

[nismoninjagtr]

cause i'm just gonna drop a 26 in with some n1's and go wouldn't i have to tune a 30 off the bat to account for the change in displacement?

[Racinjitter]

You should tune it with the N1 crap also. Quit being a noob and buy this stuff!

[nismoninjagtr]

lmao i am a noob to the rb game but i'm working on it and when taxe time hits if it's still around maybe i will 8o hahaha

[holemilk00]

Tax returns are arriving, get on one of these guys.

[alohaworld]

fck dude, get me a shipping quote to hawaii 96817!! i want in on this :D

[cnile51]

Still available?

[holemilk00]

Yes I still have both. I had a deposit on one over a month ago and the guy has been MIA so his loss. I'll work on that shipping quote to Hawaii but I'll need you to PM me some more details. Address and if it's a business (cheaper) or a residence. This isn't like shipping through UPS. Haha

[GabeS14]

just sent you a pm hit me up!

[Imarvin240]

is there...if any, a weight difference between the rb30 and rb26 block?

[Magical Trevor]

I know the 30 block is about 40mm taller than a 26. So I would say somewhere around 20-30lbs.

[TayDaMan]

i want the r33 head still have it call me at 469 585 1344 thanks