MI RB30 series II's GODZIRRAAAA!!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*holemilk00* · 11-02-2010, 01:13 PM

Do you feel inadequate? Sometimes feel like your <500whp car just isn't enough anymore? Well then do I have the cure you, step right up and take a look at this deal:

RB30 Series II Short Blocks ZOZMZGZ

I've realized I don't have the room for three of these and I have one for myself, so here are the extra two for sale. As you can see they have all the accessories on them and all the brackets. Nothing is bent and everything is clean, these are not rust bucket motors like a lot of the ones you see for sale. These are for the base of the mother of all RB builds.

I'd love to have them picked up but I'd be willing to ship if you're willing to pay, I have a pallet and a forklift so it could go freight which will be cheaper.

I will deliver within a reasonable distance for the cost of gas, I will provide receipts and you will be buying me McDonald's before I drive back home.

These things are one hell of a wait from Australia and shipping/import tax/customs usually runs over a grand so I'm going to say I need to at least get my money back out of it.

PM me here I'm here everyday
I take paypal

$1100+shipping

Sorry for the indoor pics but they are all I have for now. If you've seen these things for sale before you know that these are amazingly rust free and clean.

Even the dip stick is in great condition

A/C compressor

Common questions about these are:

Q: Will a RB26 head bolt right to these?
A: Yes after you have the head stud holes in the block machined from 12mm to 14mm they will bolt right up.

Q: Will a RB25 head bolt right to these?
A: No, the above machining has to be done and there are some water jackets that need to be enlarged (this doesn't "HAVE" to be done for it to work, but it is advised)

Q: Will a RB25 neo head bolt right to these?
A: Yes.

Q: How much should the machining cost to get my RB26/25 head to work?
A: I've had two blocks done for each head in the past, never paid over $200 from a VERY reputable shop.

Q: How much is shipping?
A: Usually to a business address anywhere from $200-$400 depending on the distance, a little more for a residential address. (If you know of a cheaper way I will be more than happy to do whatever it takes to use it)

Q: How much do you eat at McDonald's?
A: About $6 bucks

Q: Do you have a head that you will sell with these:
A: Yes I have a R33 GTR RB26 head I will sell with one of them, complete, PM me for details.

Any other questions should be posted in here so I can answer them in open forum in case anyone else has the same question.

Alright guys, Its OBO on these, and I'm open to trades, trades + cash, and other bargaining tactics.

Things I need, S13 silvia front end whole or parts, S14 kouki front parts, SR parts, S13 suspension (no megan or comparable, sorry guys just not my thing) and a whole host of other things just try me out.

josephin510 · 11-02-2010, 01:35 PM

Very interesting motor Glws

confuzed240 · 11-03-2010, 08:42 AM

Wow guy here in NC sells these all day for $300-400 bucks. Don't know the condition but yours look pretty good.

*holemilk00* · 11-03-2010, 09:08 AM

Being from NC, and the fact that when I bought these I lived in NC, I highly doubt good RB30 blocks sell for $300-400 each. I have the freight bill for over $2000 for four blocks. That's not including buying the blocks, or paying the other fees involved. Think about it, it cost $300 to ship a block coast to coast, do you really think it cost less than that to ship it around the world? Just search RB30 on this site and see what these sell for. And I've also searched CN for these and they don't come up on there either. The cheapest these blocks can be had online is about $600 completely stripped and rusted out.

Buriantsu · 11-03-2010, 10:05 AM

I would be interested but I don't have money for McDonalds...

*holemilk00* · 11-03-2010, 10:17 AM

I am actually driving to Miami/south Florida on December 15th. So we could definitely work something out for cheap on shipping cost since I'm going that way anyhow. This goes for anyone else along my route down there throughout Charlotte NC (to see my mom) or Wilmington (to see friends). That can be worked out to save any of you money on shipping.

Envy · 11-03-2010, 10:57 AM

Great looking blocks! $1,100 for legit RB30 shortblocks!

....$300 for RB30's would just be a block. No pistons, crank, rods, oil pan, accessories... etc etc.

confuzed240 · 11-03-2010, 11:23 AM

Ah yes my mistake. He was selling bare blocks only. Not hating your thread, love the RB30!!! GLWS!

CamryOnBronze · 11-03-2010, 11:45 AM

Vouch for this seller- Shane is a stand up guy and has some TOP NOTCH parts. Just a good guy all around- don't hesitate to hit him up!

copermn · 11-03-2010, 11:58 AM

Dude if I hadn't bought my rb20 couple months ago, I'd definitely buy this! GLWS man!!

P-Funk alot · 11-03-2010, 12:12 PM

see its people like you that make it hard for people like me to prioritize in life. i might just be saying good bye to my vk56 setup and get back into an rb powered car man oh man choices....

Magical Trevor · 11-04-2010, 03:37 PM

I've seen both these blocks in person, and where they're stored. Shane is a legit seller with a LOT of super JDM... in this case ADM parts. Buy with confidence people!

BoostinIX · 11-05-2010, 05:14 AM

Free bump for a pimp block

GRNxS14 · 11-05-2010, 05:44 AM

How much power are the stock internals good for? Im assuming these blocks would have to be built. Man if I didnt have a bunch of stuff to buy still to finnish up my s14 Id jump on this instantly. Killer deal so bump for you! Already imported RB30 blocks usually sell close to $1500 without the mounts, p/s and a/c pumps, oil pan, and flywheel.

Magical Trevor · 11-05-2010, 11:48 AM

I know R.I.P.S. in New Zealand has proven ~600whp on stock internals.

*holemilk00* · 11-06-2010, 05:25 PM

Quote:

Originally Posted by GRNxS14

How much power are the stock internals good for? Im assuming these blocks would have to be built. Man if I didnt have a bunch of stuff to buy still to finnish up my s14 Id jump on this instantly. Killer deal so bump for you! Already imported RB30 blocks usually sell close to $1500 without the mounts, p/s and a/c pumps, oil pan, and flywheel.

Sorry I should have answered this in the original post. If you go on Skylinesaustralia.com you can see where people have made 600 and up on the stock lower end. With that said, these blocks are suited for rebuild, meaning that they are simply used blocks, without any failure. So a stock rebuild would be recommended at the bare minimum. The stock parts obviously can be had a lot cheaper than say spool rods and forged pistons.

Like stated above, its rare to find these with all the accessories and brackets undamaged and this is a killer price. I'm getting a LOT of interest on these because of the price. Unlike a lot of other blocks listed online I'm not trying to make a couple hundred dollars per block, I'm just trying to get my money back. Someone jump on this deal fast, as I have 3-4 seriously interested parties at the moment.

Racinjitter · 11-06-2010, 06:38 PM

Awesome deal for stupid clean rb30's. +1 to Shane being stand up!

*holemilk00* · 11-11-2010, 01:43 PM

Alright I have a deposit on one block pending pick up. The other one is still for sale. I wanted to add that I have a brand new set of McKinney motor and trans mounts along with the steel driveshaft for sale too if anyone needs them with the block we can cut a deal. I also have lots and lots of other RB swap stuff, I had this stuff pieced together to do a swap but I've gone LS2 instead.

*holemilk00* · 11-24-2010, 12:35 PM

Lets bump this up for the local buyer backing out on one block. This means both are still avaliable, I have a R33 RB26DETT head complete and clean that I can work into a deal if someone is looking for a long block set up to build a beast from. Lets get these things sold.

Racinjitter · 11-25-2010, 05:42 PM

Dork that backed out is a dork. He doesn't know what he is missing!

Buriantsu · 11-25-2010, 06:37 PM

You never got back to me on pricing for the RB head on the 30 block.

*holemilk00* · 11-27-2010, 04:54 PM

Quote:

Originally Posted by Buriantsu

You never got back to me on pricing for the RB head on the 30 block.

Hey man,

I found the PM in my sent box, don't know why you wouldn't have gotten it but I sent it again. Keep me posted.

*holemilk00* · 12-29-2010, 06:49 AM

Alright, since the holidays are almost over and I'll be back home in a few days. Lets get some serious buyers interested in these things. Like I said I have a RB26 head minus the cams also, a McKinney motor and trans mount set brand new, and a McKinney steel driveshaft that are all also for sale.

*holemilk00* · 01-18-2011, 02:32 PM

Is anyone out there? Bueler? Bueler?

Syncade · 01-18-2011, 03:05 PM

Free bump for you.

gunmetalr32 · 01-18-2011, 03:22 PM

Ughhhh. I just bought a 3rd gen 3sgte for my deuce... I would of been all over this..

nismoninjagtr · 01-21-2011, 04:46 PM

if i knew how to tune an rb30 i would try to buy this block instead of aiming for that good ol' 2.6l

jr_ss · 01-21-2011, 05:29 PM

Quote:

Originally Posted by nismoninjagtr

if i knew how to tune an rb30 i would try to buy this block instead of aiming for that good ol' 2.6l

That's a pretty stupid statement. Why would it be any different than tuning any other motor?

Racinjitter · 01-21-2011, 08:35 PM

Agreed. That statement makes no sense at all.

bardabe · 01-21-2011, 08:45 PM

why are you not not in socal? =(

11-02-2010, 01:13 PM	#1
holemilk00 Premium Member Join Date: Oct 2006 Location: Cape Coral, FL Posts: 2,485 Trader Rating: (33) Feedback Score: 33 reviews	RB30 series II's GODZIRRAAAA!!!! Do you feel inadequate? Sometimes feel like your <500whp car just isn't enough anymore? Well then do I have the cure you, step right up and take a look at this deal: RB30 Series II Short Blocks ZOZMZGZ I've realized I don't have the room for three of these and I have one for myself, so here are the extra two for sale. As you can see they have all the accessories on them and all the brackets. Nothing is bent and everything is clean, these are not rust bucket motors like a lot of the ones you see for sale. These are for the base of the mother of all RB builds. I'd love to have them picked up but I'd be willing to ship if you're willing to pay, I have a pallet and a forklift so it could go freight which will be cheaper. I will deliver within a reasonable distance for the cost of gas, I will provide receipts and you will be buying me McDonald's before I drive back home. These things are one hell of a wait from Australia and shipping/import tax/customs usually runs over a grand so I'm going to say I need to at least get my money back out of it. PM me here I'm here everyday I take paypal $1100+shipping Sorry for the indoor pics but they are all I have for now. If you've seen these things for sale before you know that these are amazingly rust free and clean. Even the dip stick is in great condition A/C compressor Common questions about these are: Q: Will a RB26 head bolt right to these? A: Yes after you have the head stud holes in the block machined from 12mm to 14mm they will bolt right up. Q: Will a RB25 head bolt right to these? A: No, the above machining has to be done and there are some water jackets that need to be enlarged (this doesn't "HAVE" to be done for it to work, but it is advised) Q: Will a RB25 neo head bolt right to these? A: Yes. Q: How much should the machining cost to get my RB26/25 head to work? A: I've had two blocks done for each head in the past, never paid over $200 from a VERY reputable shop. Q: How much is shipping? A: Usually to a business address anywhere from $200-$400 depending on the distance, a little more for a residential address. (If you know of a cheaper way I will be more than happy to do whatever it takes to use it) Q: How much do you eat at McDonald's? A: About $6 bucks Q: Do you have a head that you will sell with these: A: Yes I have a R33 GTR RB26 head I will sell with one of them, complete, PM me for details. Any other questions should be posted in here so I can answer them in open forum in case anyone else has the same question. Alright guys, Its OBO on these, and I'm open to trades, trades + cash, and other bargaining tactics. Things I need, S13 silvia front end whole or parts, S14 kouki front parts, SR parts, S13 suspension (no megan or comparable, sorry guys just not my thing) and a whole host of other things just try me out.

11-02-2010, 01:35 PM	#2
josephin510 Zilvia Junkie Join Date: Mar 2009 Location: richmond Age: 32 Posts: 504 Trader Rating: (0) Feedback Score: 0 reviews	Very interesting motor Glws __________________ Trade my Rb25 for some wheels. Buy my Sc300.

11-03-2010, 10:05 AM	#5
Buriantsu Zilvia FREAK! Join Date: May 2008 Location: Miami Posts: 1,036 Trader Rating: (5) Feedback Score: 5 reviews	I would be interested but I don't have money for McDonalds... __________________ Hialeah EditionHialeah Edtion

11-03-2010, 11:45 AM	#9
CamryOnBronze Post Whore! Join Date: Oct 2008 Location: MI Age: 35 Posts: 3,913 Trader Rating: (131) Rides Gallery: CamryOnBronze Feedback Score: 131 reviews	Vouch for this seller- Shane is a stand up guy and has some TOP NOTCH parts. Just a good guy all around- don't hesitate to hit him up! __________________ CamryOnBronze.com

11-05-2010, 05:44 AM	#14
GRNxS14 Zilvia Junkie Join Date: Jun 2007 Location: Cincinnati Age: 32 Posts: 357 Trader Rating: (14) Feedback Score: 14 reviews	How much power are the stock internals good for? Im assuming these blocks would have to be built. Man if I didnt have a bunch of stuff to buy still to finnish up my s14 Id jump on this instantly. Killer deal so bump for you! Already imported RB30 blocks usually sell close to $1500 without the mounts, p/s and a/c pumps, oil pan, and flywheel. __________________ RB26 S14 Kouki

11-03-2010, 08:42 AM	#3
confuzed240 Zilvia Member Join Date: May 2009 Location: Raleigh Age: 32 Posts: 178 Trader Rating: (3) Feedback Score: 3 reviews	Wow guy here in NC sells these all day for $300-400 bucks. Don't know the condition but yours look pretty good.

11-03-2010, 09:08 AM	#4
holemilk00 Premium Member Join Date: Oct 2006 Location: Cape Coral, FL Posts: 2,485 Trader Rating: (33) Feedback Score: 33 reviews	Being from NC, and the fact that when I bought these I lived in NC, I highly doubt good RB30 blocks sell for $300-400 each. I have the freight bill for over $2000 for four blocks. That's not including buying the blocks, or paying the other fees involved. Think about it, it cost $300 to ship a block coast to coast, do you really think it cost less than that to ship it around the world? Just search RB30 on this site and see what these sell for. And I've also searched CN for these and they don't come up on there either. The cheapest these blocks can be had online is about $600 completely stripped and rusted out.

11-03-2010, 10:17 AM	#6
holemilk00 Premium Member Join Date: Oct 2006 Location: Cape Coral, FL Posts: 2,485 Trader Rating: (33) Feedback Score: 33 reviews	I am actually driving to Miami/south Florida on December 15th. So we could definitely work something out for cheap on shipping cost since I'm going that way anyhow. This goes for anyone else along my route down there throughout Charlotte NC (to see my mom) or Wilmington (to see friends). That can be worked out to save any of you money on shipping.

11-03-2010, 10:57 AM	#7
Envy Join Date: Jul 2009 Location: Houston, Texas Age: 33 Posts: 21 Trader Rating: (0) Feedback Score: 0 reviews	Great looking blocks! $1,100 for legit RB30 shortblocks! ....$300 for RB30's would just be a block. No pistons, crank, rods, oil pan, accessories... etc etc.

11-03-2010, 11:23 AM	#8
confuzed240 Zilvia Member Join Date: May 2009 Location: Raleigh Age: 32 Posts: 178 Trader Rating: (3) Feedback Score: 3 reviews	Ah yes my mistake. He was selling bare blocks only. Not hating your thread, love the RB30!!! GLWS!

11-03-2010, 11:58 AM	#10
copermn Leaky Injector Join Date: Jul 2010 Location: Northern Illinois Age: 31 Posts: 137 Trader Rating: (3) Feedback Score: 3 reviews	Dude if I hadn't bought my rb20 couple months ago, I'd definitely buy this! GLWS man!!

11-03-2010, 12:12 PM	#11
P-Funk alot Zilvia Addict Join Date: Sep 2009 Location: 909 Age: 35 Posts: 831 Trader Rating: (7) Feedback Score: 7 reviews	see its people like you that make it hard for people like me to prioritize in life. i might just be saying good bye to my vk56 setup and get back into an rb powered car man oh man choices....

11-04-2010, 03:37 PM	#12
Magical Trevor Zilvia Addict Join Date: Jun 2007 Location: Houston Posts: 610 Trader Rating: (8) Feedback Score: 8 reviews	I've seen both these blocks in person, and where they're stored. Shane is a legit seller with a LOT of super JDM... in this case ADM parts. Buy with confidence people!

11-05-2010, 05:14 AM	#13
BoostinIX Zilvia Addict Join Date: Feb 2008 Location: Laurel, MD Age: 36 Posts: 815 Trader Rating: (29) Feedback Score: 29 reviews	Free bump for a pimp block

11-05-2010, 11:48 AM	#15
Magical Trevor Zilvia Addict Join Date: Jun 2007 Location: Houston Posts: 610 Trader Rating: (8) Feedback Score: 8 reviews	I know R.I.P.S. in New Zealand has proven ~600whp on stock internals.

11-06-2010, 06:38 PM	#17
Racinjitter Leaky Injector Join Date: Aug 2006 Location: Mt. Clemens, Mi Age: 40 Posts: 92 Trader Rating: (5) Feedback Score: 5 reviews	Awesome deal for stupid clean rb30's. +1 to Shane being stand up! __________________

11-11-2010, 01:43 PM	#18
holemilk00 Premium Member Join Date: Oct 2006 Location: Cape Coral, FL Posts: 2,485 Trader Rating: (33) Feedback Score: 33 reviews	Alright I have a deposit on one block pending pick up. The other one is still for sale. I wanted to add that I have a brand new set of McKinney motor and trans mounts along with the steel driveshaft for sale too if anyone needs them with the block we can cut a deal. I also have lots and lots of other RB swap stuff, I had this stuff pieced together to do a swap but I've gone LS2 instead. __________________ I had a cool signature

11-24-2010, 12:35 PM	#19
holemilk00 Premium Member Join Date: Oct 2006 Location: Cape Coral, FL Posts: 2,485 Trader Rating: (33) Feedback Score: 33 reviews	Lets bump this up for the local buyer backing out on one block. This means both are still avaliable, I have a R33 RB26DETT head complete and clean that I can work into a deal if someone is looking for a long block set up to build a beast from. Lets get these things sold. __________________ I had a cool signature

11-25-2010, 05:42 PM	#20
Racinjitter Leaky Injector Join Date: Aug 2006 Location: Mt. Clemens, Mi Age: 40 Posts: 92 Trader Rating: (5) Feedback Score: 5 reviews	Dork that backed out is a dork. He doesn't know what he is missing! __________________

11-25-2010, 06:37 PM	#21
Buriantsu Zilvia FREAK! Join Date: May 2008 Location: Miami Posts: 1,036 Trader Rating: (5) Feedback Score: 5 reviews	You never got back to me on pricing for the RB head on the 30 block. __________________ Hialeah EditionHialeah Edtion

12-29-2010, 06:49 AM	#23
holemilk00 Premium Member Join Date: Oct 2006 Location: Cape Coral, FL Posts: 2,485 Trader Rating: (33) Feedback Score: 33 reviews	Alright, since the holidays are almost over and I'll be back home in a few days. Lets get some serious buyers interested in these things. Like I said I have a RB26 head minus the cams also, a McKinney motor and trans mount set brand new, and a McKinney steel driveshaft that are all also for sale. __________________ I had a cool signature

01-18-2011, 02:32 PM	#24
holemilk00 Premium Member Join Date: Oct 2006 Location: Cape Coral, FL Posts: 2,485 Trader Rating: (33) Feedback Score: 33 reviews	Is anyone out there? Bueler? Bueler? __________________ I had a cool signature

01-18-2011, 03:05 PM	#25
Syncade Zilvia FREAK! Join Date: Sep 2007 Location: Pittsburgh Posts: 1,250 Trader Rating: (1) Feedback Score: 1 reviews	Free bump for you. __________________ Jets > Cars

01-18-2011, 03:22 PM	#26
gunmetalr32 Post Whore! Join Date: Jan 2008 Location: oxnard,CA Age: 34 Posts: 3,077 Trader Rating: (14) Feedback Score: 14 reviews	Ughhhh. I just bought a 3rd gen 3sgte for my deuce... I would of been all over this..

01-21-2011, 04:46 PM	#27
nismoninjagtr Zilvia Junkie Join Date: Apr 2010 Location: The "O" state Posts: 484 Trader Rating: (7) Feedback Score: 7 reviews	if i knew how to tune an rb30 i would try to buy this block instead of aiming for that good ol' 2.6l __________________ 4MationD! 90se RB26:build,95pgt KLZE swap:daily,92le vh45 swap planned

01-21-2011, 08:35 PM	#29
Racinjitter Leaky Injector Join Date: Aug 2006 Location: Mt. Clemens, Mi Age: 40 Posts: 92 Trader Rating: (5) Feedback Score: 5 reviews	Agreed. That statement makes no sense at all. __________________

01-21-2011, 08:45 PM	#30
bardabe Post Whore! Join Date: Aug 2005 Location: SoCal Age: 31 Posts: 4,716 Trader Rating: (10) Rides Gallery: bardabe Feedback Score: 10 reviews	why are you not not in socal? =( __________________ Review Thread

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode