exedy stage 2 clutch

[nissanman22]

hi.. ive been searching for tyhe last few hours and have found different ft-lbs ratings for this clutch..
Exedy 06950B High Performance Stage 2 Clutch Kit S13 S14 SR20DET (http://www.frsport.com/Exedy-06950B-High-Performance-Stage-2-Clutch-Kit-S13-S14-SR20DET_p_1206.html)

i was wondering if i could run this clutch on a z32 maf.. 550cc and s15 t28 at 17lbs.. with roughly 300whp... and secondly it is worth upgrading to a lighter flywheel.. im only street driving.. and anyone know where i can get an oem sr20det s13 flywheel

[Yeap]

I run a stage 2 clutch with nearly the same setup. Works fine with stock flywheel.

[PooPoo240]

You'll be more then fine with that clutch for your setup.

Couple guys run that clutch with the 2871R making about 350whp with no issues.
lightweight flywheels is great, just don't go too overboard with something ridiculously light makes daily driving a nightmare.

[slim_240]

i remember reading on the GT2871 thread and the clutch slips around 375whp