PDA

View Full Version : Sr spark problem


jacobs13
06-27-2010, 06:12 PM
My engine is getting everything but spark the middle wire on the coilpack has 12v like it should. The minus sign on the coilpack itself is that the ground? When I test that wire it doesnt ground but the first wire to the left grounds the middle wire but I thought that was the remote? What wires do what? Also should the remote wire have 12v when cranking?

DriftVader
06-27-2010, 09:59 PM
For ground, there should be a little black ground wire coming off the coilpack harness near the end of it, where it plugs into the other harness.

as far as spark, make sure your cars CAS is TDC. have u touched or moved ur CAS?

as long as all ur coil packs r getting 12v,u should be good. u could always using a timing gun to make sure they r getting spark.

jacobs13
06-28-2010, 03:47 PM
For ground, there should be a little black ground wire coming off the coilpack harness near the end of it, where it plugs into the other harness.

as far as spark, make sure your cars CAS is TDC. have u touched or moved ur CAS?

as long as all ur coil packs r getting 12v,u should be good. u could always using a timing gun to make sure they r getting spark.

Ok, but is the "E" the remote wire? Should it get power?

jacobs13
06-29-2010, 11:06 AM
No one? And I doubt its the timing since it was never changed

xska
06-29-2010, 07:32 PM
From what i remember, middle wire is power +, E stands for earth? which is ground, - is for signal from ignitor.

jacobs13
06-30-2010, 12:23 PM
From what i remember, middle wire is power +, E stands for earth? which is ground, - is for signal from ignitor.

Thanks that helped me alot