BC Stage 2 S13 SR20det cams tomei and greddy cam gear

[vvtisupra]

Used for 2 dyno sessions

tomei intake cam gear

greddy exhaust cam gear

Cams are stage 2 BC cams that have been WPC coated
the marking you see on the cams are the wpc coat wearing in. cams were shimmed properly thus you notice the even wear across the lobe.

100 for EACH cam gear

250 for both cams

will ship at your expense

http://xc7.xanga.com/57df601a12532267191448/w213133376.jpg

http://xb2.xanga.com/7f1f761a52533267191446/w213133374.jpg

http://xb6.xanga.com/c93f44e715730267191444/t213133372.jpg

http://x4d.xanga.com/46ff40e115730267191443/w213133371.jpg

http://xf2.xanga.com/c11f711a71d33267191436/w213133366.jpg

[vvtisupra]

200 For the cams

150 for both cam gears

80 each

[vvtisupra]

bump it up. Also I should probably clarify. The cams are NOT being eaten up by the rocker arms.

The polished section of the cam is the cam surface being exposed once the wpc treatment is worn off. WPC is a micro metal treatment that fills the voids in porous metals . This increases strength while reducing friction and heat capacity. A lot of top name builders and race teams use this treatment process.

You notice the cam lobe has an even surface exposure across the lobe which indicates that the rockers are properly shimmed. Where as if rockers were not properly shimmed you'd see one side of the lobe wear faster than the other side.

So for clarification these cams are NOT damaged.

[richmond82]

-total post screw up here-

see below

[richmond82]

Very interested in purchasing the Cam Gears. I have Tomei Pon Cams in my 2000 S15 SR. I am however running stock gears. Do you know if this will work with my cureent set up ? If so i am interested in buying tonight or tomorrow am.

- Drake- http://i1216.photobucket.com/albums/dd370/drake_deyoung/310506_289401784405278_100000063776116_1279672_207 6224432_n2.jpg

[drftx]

damn where was this yesterday when i bought my bc 2 cams -.-

[vvtisupra]

sorry guys these were sold a while ago