5-speed swap question (wiring info)

[Ali 556]

searched already,

So i'm swaping my 2JZ-GTE + R154 trans instead of the ka... mechanicals are A-OK,

Now Wiring :

i've jumped the 1st connector and i still can't take my key out (when the auto tans is in N).

reverse light : 3rd connector down right?...been looking in the FSM and i can't match the colors with HOW-TO threads,

Now do i need the remaining 2 connectors? or i can trash'em ?

a how to thread said i need to ground the 1st connector ? i've jumped it already or i need to jump THEN gound?

thx guys,

Oh '95 S14 Se here

[Ali 556]

:kiss:

msg lenght

[Dazzla]

Problem 1:

Open up the cover on the steering wheel and remove the 'key interlock cable':
http://img37.imageshack.us/img37/2948/screenshot20100129at105.png

Problem 2:

Wire up the reverse sensor, the rest are not really important unless your worried about a CEL or something.
http://i274.photobucket.com/albums/jj262/ldiggles/MT.jpg

[essforteen]

Reverse light is on the plug second to last get the black and the green wire and run them
to the reverse light sensor!
http://www.ka24development.com/cwilfert/electrical_wiring_harness_connectors.jpg

Try this write up well written and very detailed!
S14 Tranny Swap - Electrical Connections (http://www.ka24development.com/cwilfert/S14_tranny_swap_electrical.html)

[Ali 556]

thx dazzla :bigok:,

Now On 95 S14 which connector is the ''inhibitor'' switch? 1st or 2ND?, I've already jumped the 1st one....?

some write-ups say the 2nd? care to help ?

oh and thx other dude i've checked that link b4

[Dazzla]

All you need to do is jump the first one on the top:

http://www.ka24development.com/cwilfert/electrical_wiring_harness_connectors_in.jpg

wire in the reverse sensor, and your done.