Boost Port taps?

[Z33dori]

has any one here made their own boost port before?

Trying to find out if i can just use like a brass fitting :
http://imghost1.indiamart.com/data2/KV/DE/HELLOTD-1863288/743056-250x250.jpg

does it need to be a 1 way check valve, or can i just use a reg fitting?

[greenman100]

um, regular fitting. why not T off an existing?

[lilrusty]

use regular fitting... i used same kind of fitting and tapped to turbo outlet.

[Ceepo]

^ trill and tap the turbo elbow...

Kind of like that....

http://www.godspeedproject.com/store/images/turbo_charger/gt28s13.jpg

[Z33dori]

yea thats what i was wondering, if i should just drill a hole in my turbo and thread it( or the elbow), or just silicone it into the outlet coupler.

[cotbu]

works really well, use the smallest threaded sizes to fit you needs, just in case you have to do it again, or screw up. You won't have a big hole to fill for a small hose fitting.