Dohc S13 Engine Haress Question

[SmogSUX]

Well went to fire up my project today and ended up seeing smoke so I quickly stopped trying to crank it over...found this plug that was taped down in the harness melted:

http://i6.photobucket.com/albums/y232/SmogSUX/photo12.jpg

(Here it is after I cut the stuff that melted off)
http://i6.photobucket.com/albums/y232/SmogSUX/photo11.jpg

It's the plug on the par of the harness that goes to the coil or w/e it is that ends up going to the cap/rotor.


Also I have this plug on that same area of the engine harness that has nowhere to go...anyone know where it goes or if it just chills without being plugged in?
http://i6.photobucket.com/albums/y232/SmogSUX/photo2.jpg

[projectRDM]

Power steering pressure switch, plugs into the lead coming off the high pressure hose, down below the airbox.

[SmogSUX]

Thanks! And do you know what's up with that plug that melted?

[Chue240sx]

Does the melted plug consist of the four wires shown?

[projectRDM]

Looks like the ignition coil and power transistor.

[SmogSUX]

Does the melted plug consist of the four wires shown?

Yes, there are 2 pictures. First was after I unwrapped it showing the melted mess. Second was after I cut everything off to try and start my car again without shit melting.

[Chue240sx]

I'll take a look at my harness and comes visit u sometime this weekend if ur available.