s14 ka24de clutch/tranny

[flawlessflo3190]

just got my clutch replaced and it still slips....any ideas what it could be....? it goes into gears fine just once i punch it in a gear it'll catch.......and then slip...

[69datsun510]

If you didn't resurface your flywheel at the time of the new clutch, the flywheel would be the problem.

[jdm213]

but if you did resurface the flywheel, the flywheel can be contamintated with grease or oil, also your clutch pedal could too high and you need to adjust it to be lower, it happened to me and i had to put in a new clutch master cylinder.

[jdm213]

but if you did resurface the flywheel, the flywheel can be contamintated with grease or oil, also your clutch pedal could be too high when your engaging into gear and you need to adjust it to be lower, it happened to me and i had to put in a new clutch master cylinder.

[carcrzy920]

flywheel could need a resurfacing, clutch pedal too high or maybe too low not engageing the clutch fully, did you do the recommended break in 500miles?

[KA24sleeper]

reajust your clutch peddle. i have heard this problem countless of times when all they had to do was to ajust the clutch