bearback
12-23-2009, 06:43 PM
ok, so i got a blacktop sr and pos harness from jemadness(which btw, DO NOT do business with this memeber, EVER. he is no longer responding to my pms nor will he answer his phone. theres oil around the headgasket, so im pretty sure it leaks. hes super hairy and wont help me with anything.) anyways, theres multiple wiring issues im having problems with..
first off, this is what his bs looked like-
http://i130.photobucket.com/albums/p251/HamForLife/wiringharness004.jpg
so sean gave me a part of a fresh harness so i could give mine a face life. (seans harness runs from the ecu plug up to the "Y" where it goes into the O2 sensor plug and the other fork ends at the ignitor plug)
and right now im dealing with..
i matched all the wires from the bs harness to those from seans, and ive got 3 left over wires on the O2 side(on seans):
mint green/black
yellow/white
green/blue
http://i130.photobucket.com/albums/p251/HamForLife/wiringharness003.jpg
then, on the ignitor side, ive got 5 left over on seans:
pink
blue/white
orange/blue
green/blue
BIG grey with black/white inside
http://i130.photobucket.com/albums/p251/HamForLife/wiringharness005.jpg
and on the ignitor side of the bs harness, ive got 5 left over:
2 green/yellow
black(theres 5 on bs, and 4 on seans)
2 BIG greys(white/black inside)
http://i130.photobucket.com/albums/p251/HamForLife/wiringharness006.jpg
and also, this grey plug(idk what it is) had a grey plug plugged into it. and instead of wiring it to the 240, i just sanded the red plug key down and plugged it in.. is this bad? or wrong?
http://i130.photobucket.com/albums/p251/HamForLife/wiringharness007.jpg
this was plugged into it
http://i130.photobucket.com/albums/p251/HamForLife/wiringharness008.jpg
and one more thing... idk what this plug is-
http://i130.photobucket.com/albums/p251/HamForLife/wiringharness009.jpg
<FONT COLOR=""Red""><FONT SIZE=""7"">THANKS A TON BROS!!!</FONT></FONT>
first off, this is what his bs looked like-
http://i130.photobucket.com/albums/p251/HamForLife/wiringharness004.jpg
so sean gave me a part of a fresh harness so i could give mine a face life. (seans harness runs from the ecu plug up to the "Y" where it goes into the O2 sensor plug and the other fork ends at the ignitor plug)
and right now im dealing with..
i matched all the wires from the bs harness to those from seans, and ive got 3 left over wires on the O2 side(on seans):
mint green/black
yellow/white
green/blue
http://i130.photobucket.com/albums/p251/HamForLife/wiringharness003.jpg
then, on the ignitor side, ive got 5 left over on seans:
pink
blue/white
orange/blue
green/blue
BIG grey with black/white inside
http://i130.photobucket.com/albums/p251/HamForLife/wiringharness005.jpg
and on the ignitor side of the bs harness, ive got 5 left over:
2 green/yellow
black(theres 5 on bs, and 4 on seans)
2 BIG greys(white/black inside)
http://i130.photobucket.com/albums/p251/HamForLife/wiringharness006.jpg
and also, this grey plug(idk what it is) had a grey plug plugged into it. and instead of wiring it to the 240, i just sanded the red plug key down and plugged it in.. is this bad? or wrong?
http://i130.photobucket.com/albums/p251/HamForLife/wiringharness007.jpg
this was plugged into it
http://i130.photobucket.com/albums/p251/HamForLife/wiringharness008.jpg
and one more thing... idk what this plug is-
http://i130.photobucket.com/albums/p251/HamForLife/wiringharness009.jpg
<FONT COLOR=""Red""><FONT SIZE=""7"">THANKS A TON BROS!!!</FONT></FONT>