PDA

View Full Version : Rb25det neo 6 won't spark. Help!!!


SR707DRIFT
12-20-2009, 11:10 AM
I've got a S13 240sx with a RB25DET NEO 6 swap. It was running good. But one day the fuel pump went out. So I replaced it with a Walbro and it still wasn't running. I jumped the relay and then it would run. So anyways I fixed the problem for the fuel pump, the car was running but when I parked it and went into the store I came back in like 10 minutes and it wouldn't start. I figured out it wasn't getting any spark. I checked the spark plugs and wires and they were fine. What could it be? By the way I have Splitfire Coilpacks.

Please help.

Thanks.

1GayDrifter
12-30-2009, 12:38 PM
a neo? congrats. impressive. not very many writeups for the neo swap. but anyway. check your fuse box, you think you could've popped any fuses cause of bad grounds?

P-Funk alot
01-12-2010, 01:46 AM
ive havent personally used the splitfire coils but from what i understand there garbage so that could be a problem and on the coil harness there is a ground wire that has a habbit of coming loose buy the 6 cylinder

sheeno89
09-13-2011, 03:07 AM
Hey what ended up being the problem?