View Full Version : SR20 boost question
enthennd
12-13-2009, 08:17 AM
Hello all. I got a sr20 with a t25, fmic/intake/open downpipe is all its got right now. It was at stock boost (7 psi) til I took the exhaust off and it hits about 8.5 ish now.
But I was wondering what I need to up the boost more? Would just a boost controller and walbro fuel pump be good?
And how much boost can I go to? I've heard 12 is safe, but I wanna know for sure! Thanks ahead of time!
S13 curtis
12-13-2009, 08:27 AM
yes 12psi is fine and i hope you arent still on the stock fuel pump is so dont even touch the boost!
nate29
12-13-2009, 09:07 AM
get the hks acuator it go for 14 lbs safe but it well take a toll on your turbo.
s14jesse
12-13-2009, 10:45 AM
get a walbro and a boost controller u can go up to 15psi i was like that for a min...taking out anything that got in my way..lol....but just get teh walbro and do 12 psi runs nice and wont fuck nuthing up
jspaeth
12-13-2009, 12:29 PM
Yep upgraded fp and boost controller and 14-15 psi is safe.
enthennd
12-13-2009, 01:00 PM
Awesome! Thanks, what kinda whp would I be around with 14 psi? Or 1/4, trap speed times could it pull off?
steve shadows
12-13-2009, 06:24 PM
Trap will probably be between 100-109 mph depending on your 60 ft.
As other mentioned I would make sure the following
- Walbro or Tomei, Denso high flow fuel pump of at least 255 lt per hour installed
- Use HKS or adjustable wastegate arm WG actuator upgrade to raise boost
- Don't push more than 12-13 psi, there is no point on the t25. Efficiency is gone after about 12-13.5 psi. The HKS or adjustable WG arm will get you to the perfect boost level without need for an external electronic boost controller and will work better and be more smooth
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.