View Full Version : My new clutch feels loose?
jdm213
12-10-2009, 08:24 PM
I have a fidanza lightweight fly wheel and an oem exedy clutch kit on my 91 240sx.
and when i drive it feels loose, like i drive it and it pull but i dont think its pulling hard I have no leaks, but I wanna know if it can be my clutch lines. everything is new between the engine and tranny.:duh:
Chrischeezer
12-10-2009, 08:31 PM
WHHHHHAAAAAATTT!!!!!!
terrible description...
jdm213
12-10-2009, 08:33 PM
ok like for example i turn the car on and put it in first and let go of the clutch, then it kills the engine softly instead its suppose to kill the engine hard. how about now?
chetacheese
12-10-2009, 08:47 PM
what kind of clutch is it?
jdm213
12-10-2009, 08:48 PM
what kind of clutch is it?
read my thread lol its an oem exedy clutch kit !:cops:
Ceepo
12-11-2009, 01:19 AM
I also have this clutch, it grabs just fine for me, but my clutch pedel is soft as a feather to press in, I have no leaks, bled the system properly.
(Did a 5speed swap when i went sr20det_
New Slave
New Master
SS Braided Clutch line from slave to master
Exedy OEM Sr20det clutch
negrosx13
12-11-2009, 03:24 AM
hello is a oem clutch!!!!isnt meant to have a heavy pedal.If you wanted something to feel bit heavier than stock with more bite,shouldve when with stage1 exedy etc.
Chrischeezer
12-11-2009, 08:35 AM
^^
exactly, oem sucks.. I always upgrade to something much stronger.
even my sisters car got a "stage3"
Ceepo
12-11-2009, 01:34 PM
Lol i was tight for cash and wanted to get my swap done, not like i need a over kill clutch for a stock sr20det only pushing 7psi...
coww-cho!!!!!
12-11-2009, 01:43 PM
Are you saying its your clutch pedal that feels softer than usual as in easier to push in?
because the softness/hardness of pushing the pedal in can be adjusted along with the height/ where the clutch bites
jdm213
12-11-2009, 02:32 PM
yeah like the biting point when i lift up the clutch to start accelerating, i have to lift my foot almost all the way before i can take off. and i like it to be short and like easy to play with
Ceepo
12-11-2009, 10:17 PM
Adjust the rod on the clutch pedal(master cylinder) see if that helps, or bleed the system again, my clutch engages almost instantly(about 1/2" before it starts to grab)
g6civcx
12-11-2009, 10:33 PM
Search my posts for how to adjust the pedal all the way out and bleed. Then adjust again.
jdm213
12-14-2009, 10:36 AM
Search my posts for how to adjust the pedal all the way out and bleed. Then adjust again.
thanks i will do that
do you think it can also be my release cable cause i have new slaves and bled right so im thinking my cables is loose, and it just feels softer than ever:yum:
Chrischeezer
12-14-2009, 11:15 AM
Lol i was tight for cash and wanted to get my swap done, not like i need a over kill clutch for a stock sr20det only pushing 7psi...
i have a skyline GTR,... I'm the brokest mother fu*ker on this forum.
jdm213
12-15-2009, 05:40 PM
Are you guys shure that its not any cables, :hug:
Chrischeezer
12-16-2009, 06:47 AM
what cables?.. like cable television making your clutch feel soft?!
hummm.... its highly unlikely but possible
LISTEN, their are no cables in your clutch system.
YOU HAVE AN OEM POS STOCK CLUTCH. PERIOD,
pedal pressure is only effected by the pressure plate, you have a pressure plate rated for stock power, nothing special. Just drive it normaly, If you had a problem you'd know it by now... the whole car would smell like clutch, it would slip or not engage gears
jdm213
12-17-2009, 05:35 PM
Its my pedal not it feels hard :mepoke:
ShiftedFrame
12-24-2009, 10:39 PM
i have a skyline GTR,... I'm the brokest mother fu*ker on this forum.
new sig. And def made my Xmas haha
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.