PDA

View Full Version : custom braided brake lines?

mattro
10-13-2009, 04:54 PM
im looking to get some lines made and i dont know who or where to look.

i need something to go from my brake booster to about half way across the engine bay, i need to re-route the current stock set up for clearance issues with my top mount set up, any suggestions?
HYPNOTIK
10-13-2009, 05:07 PM
Just make your own. All you need is a bender and a flare tool.
Summit SUM-900675 - Summit Racing® Tubing Benders - Overview - SummitRacing.com (http://www.summitracing.com/parts/SUM-900675/)[/URL]
[URL]http://www.summitracing.com/parts/SUM-900311/ (http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_33396_33396)
mattro
10-13-2009, 06:59 PM
Just make your own. All you need is a bender and a flare tool.
Summit SUM-900675 - Summit Racing® Tubing Benders - Overview - SummitRacing.com (http://www.summitracing.com/parts/SUM-900675/)
Summit SUM-900311 - Summit Racing® 37 Degree Flare Tool Sets - Overview - SummitRacing.com (http://www.summitracing.com/parts/SUM-900311/)

i actually have those tools i was looking for braided line though..........

anyone know what the thread pattern is for the brake booster? i need to run a 90 right out of it. and a tight 90 so it would need to be a fitting... is it universal?
ManoNegra
10-13-2009, 10:58 PM
If you were local, I would suggest stepping into Earls or Baker Precision
they would make you the lines on the spot
g6civcx
10-14-2009, 05:45 AM
I have full braided brake lines from cylinder to caliper.

If you're local just cut off the fittings from the hardline and take it in to get the correct thread pitch. Or you can bring them the master cylinder.
mattro
10-14-2009, 04:45 PM
I have full braided brake lines from cylinder to caliper.

If you're local just cut off the fittings from the hardline and take it in to get the correct thread pitch. Or you can bring them the master cylinder.


wow cant believe i didnt think of that.. thanks .

/thread.
godrifttoday
10-14-2009, 06:25 PM
wow cant believe i didnt think of that.. thanks .

/thread.

no need to cut the pitch is m10x1.0 if im not mistaken...